Greetings,
do I have any chance to get the above mentioned on-board sound on a (maybe
too) new-ish PC running --- googling showed quite a few dmesg's with
identical 'not-configured' lines?
$ man 4 auich only mentions support for the 'EB' version of the bridge.
Of course upgrading to CURRENT will be considered if helpful.
As usual any hints will be highly appreciated, best regards,
Moritz.
PS: Full dmesg follows
OpenBSD 3.7 (GENERIC) #50: Sun Mar 20 00:01:57 MST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,PNI
,MWAIT,EST,CNXT-ID
cpu0: Enhanced SpeedStep 1500 MHz (1420 mV): unknown EST cpu, no changes
possible
real mem = 1063821312 (1038888K)
avail mem = 964206592 (941608K)
using 4278 buffers containing 53293056 bytes (52044K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(a7) BIOS, date 05/03/05, BIOS32 rev. 0 @
0xfd690
pcibios0 at bios0: rev 2.1 @ 0xfd690/0x970
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdef0/240 (13 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0xa600! 0xca800/0x1000 0xe0000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 915G/P/GV Host" rev 0x04
vga1 at pci0 dev 2 function 0 vendor "Intel", unknown product 0x2582 rev
0x04: aperture at 0xf0000000, size 0x8000000
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
vendor "Intel", unknown product 0x2782 (class display subclass
miscellaneous, rev 0x04) at pci0 dev 2 function 1 not configur
ed
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x03
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x03
pci3 at ppb2 bus 3
bge0 at pci3 dev 0 function 0 "Broadcom BCM5751" rev 0x11, unknown BCM5750
(0x4101): irq 11 address 00:30:05:9c:a0:db
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb3 at pci0 dev 28 function 3 "Intel 82801FB PCIE" rev 0x03
pci4 at ppb3 bus 4
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 9
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 11
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 11
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: single transaction translator
uhub4: 8 ports with 8 removable, self powered
ppb4 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd3
pci5 at ppb4 bus 5
"Intel 82801FB AC97" rev 0x03 at pci0 dev 30 function 2 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configu
red to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <_NEC, DVD_RW ND-3530A, 1.80> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801FB SATA" rev 0x03: DMA,
channel 0 configured to native-PCI, channel 1 configure
d to native-PCI
pciide1: using irq 9 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <ST3160023AS>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
"Intel 82801FB SMBus" rev 0x03 at pci0 dev 31 function 3 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ef6d netmask ef6d ttymask ffef
pctr: user-level cycle counter enabled
uhub5 at uhub4 port 6
uhub5: hp HP L1940 USB2.0 HUB, class 9/0, rev 2.00/6.0b, addr 2
uhub5: single transaction translator
uhub5: 2 ports with 2 removable, self powered
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
