Hi all,
I've just got a problem with my DSL modem which worked fine for more
than a yeah. It stopped responding, to ping etc.
Firstly it was:
azazel ~ # ping 80.53.109.249
PING 80.53.109.249 (80.53.109.249): 56 data bytes
ping: sendto: No buffer space available
ping: wrote 80.53.109.249 64 chars, ret=-1
I've got second internet link and it worked all fine, I've set http
traffic on it, googled and fount sth about mbufs issue but everything
seemed to be fine:
azazel ~ # netstat -m
296 mbufs in use:
228 mbufs allocated to data
24 mbufs allocated to packet headers
44 mbufs allocated to socket names and addresses
214/322/6144 mbuf clusters in use (current/peak/max)
756 Kbytes allocated to network (66% in use)
0 requests for memory denied
0 requests for memory delayed
0 calls to protocol drain routines
Then error message changed to:
azazel ~ # ping 80.53.109.249
PING 80.53.109.249 (80.53.109.249): 56 data bytes
ping: sendto: Host is down
ping: wrote 80.53.109.249 64 chars, ret=-1
xl1 link was up all the time (media type ok), I have restarted modem,
checked cables, put xl1 down and up, nothing.
Then suddenly modem started to respond and I noticed thi::
xl1: watchdog timeout
I have read man watchdog but even then I don't know how it's related to
my xl1 link.
Could someone explain me? Maybe my modem just died and those timeout are
because NIC could'nt deliver packets?
Or maybe a hardware issue with that xl1 card?
I have no idea.
dmesg:
azazel ~ # dmesg
OpenBSD 3.7 (GENERIC) #0: Mon Sep 26 04:23:13 CEST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 301 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,MMX
real mem = 536453120 (523880K)
avail mem = 482713600 (471400K)
using 4278 buffers containing 26927104 bytes (26296K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(0e) BIOS, date 08/12/99, BIOS32 rev. 0 @ 0xf5597
pcibios0 at bios0: rev 2.1 @ 0xf53b0/0x1120
pcibios0: PCI BIOS has 8 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 7 9 10 11
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x600
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
ami0 at pci0 dev 7 function 0 "AMI MegaRAID Series 428" rev 0x03: irq 9
AMI 428/32b
ami0: FW A.03.00, BIOS vA.03.00, 4MB RAM
ami0: 3 channels, 16 targets, 1 logical drives
scsibus0 at ami0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
sd0: 20330MB, 2591 cyl, 255 head, 63 sec, 512 bytes/sec, 41635840 sec total
ppb0 at pci0 dev 8 function 0 "DEC 21052 PCI-PCI" rev 0x02
pci1 at ppb0 bus 1
xl0 at pci1 dev 1 function 0 "3Com 3c905 100Base-TX" rev 0x00: irq 11,
address 00:60:08:ca:f3:31
nsphy0 at xl0 phy 24: DP83840 10/100 PHY, rev. 1
xl1 at pci1 dev 2 function 0 "3Com 3c905 100Base-TX" rev 0x00: irq 7,
address 00:60:97:4b:17:14
nsphy1 at xl1 phy 24: DP83840 10/100 PHY, rev. 0
fxp0 at pci1 dev 3 function 0 "Intel 82557" rev 0x02: irq 10, address
00:60:b0:6c:7d:6b
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 0
"Intel 82375EB EISA" rev 0x15 at pci0 dev 9 function 0 not configured
ahc1 at pci0 dev 10 function 0 "Adaptec AIC-7880" rev 0x00: irq 11
ahc1: Host Adapter Bios disabled. Using default SCSI device parameters
scsibus1 at ahc1: 16 targets
cd0 at scsibus1 targ 5 lun 0: <TOSHIBA, CD-ROM XM-5701TA, 0787> SCSI2
5/cdrom removable
ahc2 at pci0 dev 11 function 0 "Adaptec AIC-7880" rev 0x00: irq 11
ahc2: Host Adapter Bios disabled. Using default SCSI device parameters
scsibus2 at ahc2: 16 targets
eisa0 at mainbus0
eisa0: can't map I/O space for slot 14
eisa0: can't map I/O space for slot 15
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard
vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072
wsdisplay0 at vga0: console (80x25, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask fb65 netmask ffe5 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: sd0 matched BIOS disk 80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
xl1: watchdog timeout
PS. bsd.mp doesn't work on this server (HP NetServer LH II P2/300mhz)
it's sth with adaptec/ami timeouts/panics/hang etc. but I will wait for
3.8 with reporting this issue)
Cheers,
--
.: Jakub G3azik
.: zytek(at)ostrow-wlkp.net
.: jid:zytek(at)azazel.ostrow-wlkp.net
