Hi Chris and thanks for the reply.
I know that if it's not loudly announced here there's
a good chance it won't be looked at but my soundcard
was in the same boat as the USB (It's an ATI
IXP200 - also an uncommon beast - now works under
3.8 using the auixp driver). I never saw anything
mentioned about my difficult soundcard in misc or
anywhere else for that matter and yet 3.8 supports
it (there are still Linux distros out there that don't).
I don't care about anything else other than the USB ports.
REALLY: This is making life unbearable.
I can't use a USB mouse and I have no serial ports.
I have no mouse (the touchpad doesn't work properly).
I can't use any USB devices at all (but the mouse is all
that matters to me). I'm desperate. I LOVE OpenBSD
and have been a follower for many years now but this is
making the OpenBSD experience extremely extremely painful
and almost impossible to use whether in X or console.
I realize they can only do what they can do and if it's
unfixable, then I won't know what to do then, but for
the last year and a half, I've waited to see if the new release
will fix it and I don't know how many CD's I've wasted
trying the 3.8 snapshots ever time they're updated, to
no avail.
Please help me.
SophieL
dmesg:
OpenBSD 3.8-current (GENERIC) #169: Sun Oct 2 15:06:50 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Mobile Intel(R) Pentium(R) 4 CPU 3.06GHz ("GenuineIntel"
686-class) 3.07 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,EST,TM2,CNXT-ID
cpu0: Enhanced SpeedStep 2300 MHz (1356 mV): unknown EST cpu, no changes
possible
real mem = 200843264 (196136K)
avail mem = 176472064 (172336K)
using 2477 buffers containing 10145792 bytes (9908K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(08) BIOS, date 02/16/04, BIOS32 rev. 0 @
0xe99b0
apm0 at bios0: Power Management spec V1.1
apm0: battery life expectancy 100%
apm0: AC on, battery charge unknown, estimated 4:18 hours
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xe7000/0x680
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfe840/176 (9 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x1002 product 0x4353
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xf000 0xe0000/0x2000! 0xe6000/0x1000!
0xeb000/0x5000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ATI RS300 Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "ATI Radeon IGP 9100 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon Mobility IGP 9100" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ohci0 at pci0 dev 19 function 0 "ATI SB200 USB" rev 0x01pci_intr_map: no
mapping for pin A
: couldn't map interrupt
ohci1 at pci0 dev 19 function 1 "ATI SB200 USB" rev 0x01pci_intr_map: no
mapping for pin A
: couldn't map interrupt
ehci0 at pci0 dev 19 function 2 "ATI SB200 USB2" rev 0x01pci_intr_map:
no mapping for pin A
: couldn't map interrupt
"ATI SB200 SMBus" rev 0x1a at pci0 dev 20 function 0 not configured
pciide0 at pci0 dev 20 function 1 "ATI IXP200 IDE" rev 0x00: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <HTS424030M9AT00>
wd0: 16-sector PIO, LBA48, 28615MB, 58605120 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA760 DVD/CDRW, 1.50> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pcib0 at pci0 dev 20 function 3 "ATI SB200 PCI-ISA" rev 0x00
ppb1 at pci0 dev 20 function 4 "ATI SB200 PCI-PCI" rev 0x00
pci2 at ppb1 bus 2
cbb0 at pci2 dev 6 function 0 vendor "ENE", unknown product 0x1411 rev
0x00pci_intr_map: no mapping for pin A
: couldn't map interrupt
vendor "ENE", unknown product 0x0530 (class memory subclass flash, rev
0x00) at pci2 dev 6 function 1 not configured
vendor "ENE", unknown product 0x0550 (class system unknown subclass
0x05, rev 0x00) at pci2 dev 6 function 2 not configured
rl0 at pci2 dev 7 function 0 "Realtek 8139" rev 0x10: irq 11 address
00:a0:d1:b7:0e:f0
rlphy0 at rl0 phy 0: RTL internal phy
"Texas Instruments TSB43AB21 FireWire" rev 0x00 at pci2 dev 10 function
0 not configured
auixp0 at pci0 dev 20 function 5 "ATI IXP200 AC97" rev 0x01: irq 10
auixp0: soft resetting aclink
auixp0: not up; resetting aclink hardware
auixp0: not up; resetting aclink hardware
auixp0: aclink hardware reset successful
vendor "ATI", unknown product 0x434d (class communications subclass
modem, rev 0x01) at pci0 dev 20 function 6 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/65536
pcic0 controller 0: <Intel 82365SL rev 2> has socket A only
pcmcia0 at pcic0 controller 0 socket 0
pcic0: irq 3, polling enabled
biomask e355 netmask eb55 ttymask fbdf
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
ac97: codec id 0x414c4752 (Avance Logic ALC250A?)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, No 3D Stereo
audio0 at auixp0
