Hi, i'm trying to get my MSA110UP 3g modem working on OpenBSD 4.8. But I think it is recognized as a hard disk device, like in Linux. There I had to install usb-modeswitch to connect, but I've heard it won't compile on OpenBSD.
Here is my dmesg output when I connect the modem: umsm0 at uhub1 port 1 configuration 1 interface 0 "ONDA,Incorporated ONDA WCDMA Technologies MSM" rev 2.00/0.00 addr 2 umsm0 detached umass0 at uhub1 port 1 configuration 1 interface 3 "ONDA,Incorporated ONDA WCDMA Technologies MSM" rev 2.00/0.00 addr 2 umass0: using SCSI over Bulk-Only scsibus3 at umass0: 2 targets, initiator 0 sd1 at scsibus3 targ 1 lun 0: <ONDA, MMC Storage, 2.31> SCSI2 0/direct removable sd1: drive offline # usbdevs -v Controller /dev/usb0: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00 port 1 powered port 2 addr 2: low speed, power 98 mA, config 1, KVM(0x5a08), No brand(0x10d5), rev 0.00 Controller /dev/usb1: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00 port 1 addr 2: full speed, power 500 mA, config 1, ONDA WCDMA Technologies MSM(0x0091), ONDA,Incorporated(0x19d2), rev 0.00, iSerialNumber P671A2ODTD010000 port 2 powered Controller /dev/usb2: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00 port 1 powered port 2 powered Does OpenBSD 4.8 support it? Thanks in advance. -- Sergio Roberto Charpinel Jr.
