Hello All: I'm having some issues w/an Intel PRO/1000 MT Dual Port Server Adapter in an OBSD-3.7 box. The card is in the pci-x riser on one of these puppies;
<http://www.tyan.com/products/html/gt20b5151.html> Dmesg complains the "The EEPROM Checksum Is Not Valid". I've tested the card in a Winblows machine and it works. Any insights as to what is going on here greatly appreciated. Full dmesg follows: OpenBSD 3.7 (GENERIC) #0: Fri Oct 14 03:11:48 MDT 2005 [EMAIL PROTECTED]:/mnt/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) 4 CPU 3.20GHz ("GenuineIntel" 686-class) 3.20 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,PNI,MWAIT,EST,CNXT- ID cpu0: Enhanced SpeedStep 1600 MHz (1388 mV): unknown EST cpu, no changes possible real mem = 1063755776 (1038824K) avail mem = 963338240 (940760K) using 4278 buffers containing 53288960 bytes (52040K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(ca) BIOS, date 05/13/05, BIOS32 rev. 0 @ 0xfaee0 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown pcibios0 at bios0: rev 3.0 @ 0xf0000/0xd6f4 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd5a0/320 (18 entries) pcibios0: bad IRQ table checksum pcibios0: PCI BIOS has 19 Interrupt Routing table entries pcibios0: PCI Exclusive IRQs: 3 5 7 10 15 pcibios0: no compatible PCI ICU found pcibios0: Warning, unable to fix up PCI interrupt routing pcibios0: PCI bus #6 is the last bus bios0: ROM list: 0xc0000/0x9400! 0xef000/0x1000! cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel E7221 MCH Host" rev 0x05 ppb0 at pci0 dev 1 function 0 "Intel E7221 PCIE" rev 0x05 pci1 at ppb0 bus 1 ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09 pci2 at ppb1 bus 2 em0 at pci2 dev 3 function 0 "Intel PRO/1000MT DP (82546EB)" rev 0x01: irq 10em0: The EEPROM Checksum Is Not Valid em0: Unable to initialize the hardware em1 at pci2 dev 3 function 1 "Intel PRO/1000MT DP (82546EB)" rev 0x01: irq 15em1: The EEPROM Checksum Is Not Valid em1: Unable to initialize the hardware vendor "Intel", unknown product 0x0326 (class system subclass interrupt, rev 0x09) at pci1 dev 0 function 1 not configured vga1 at pci0 dev 2 function 0 "Intel E7221 Video" rev 0x05: aperture at 0xfdf00000, size 0x8000000 wsdisplay0 at vga1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ppb2 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03 pci3 at ppb2 bus 3 ppb3 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x03 pci4 at ppb3 bus 4 bge0 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x11, unknown BCM5750 (0x4101): irq 5 address 00:e0:81:2f:f0:42 brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb4 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x03 pci5 at ppb4 bus 5 bge1 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x11, unknown BCM5750 (0x4101): irq 10 address 00:e0:81:2f:f0:43 brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 3 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 15 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 10 usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 7 usb3 at uhci3: USB revision 1.0 uhub3 at usb3 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 3 ehci0: EHCI version 1.0 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3 usb4 at ehci0: USB revision 2.0 uhub4 at usb4 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: single transaction translator uhub4: 8 ports with 8 removable, self powered ppb5 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd3 pci6 at ppb5 bus 6 fxp0 at pci6 dev 2 function 0 "Intel 82557" rev 0x10, i82550: irq 7, address 00:e0:81:2f:f0:08 inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4 pcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x03 pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <QSI, CD-ROM SCR-242, CXAC> SCSI0 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: no compatibility interrupt for use by channel 1 pciide1 at pci0 dev 31 function 2 "Intel 82801FR SATA" rev 0x03: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using irq 15 for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: <HDT722525DLA380> wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra- DMA mode 5 wd1 at pciide1 channel 1 drive 0: <HDT722525DLA380> wd1: 16-sector PIO, LBA48, 238475MB, 488397168 sectors wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5 "Intel 82801FB SMBus" rev 0x03 at pci0 dev 31 function 3 not configured isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> sysbeep0 at pcppi0 npx0 at isa0 port 0xf0/16: using exception 16 biomask efdd netmask effd ttymask ffff pctr: user-level cycle counter enabled Kernelized RAIDframe activated cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0 SENSE KEY: Not Ready ASC/ASCQ: Medium Not Present raid1 (root): (RAID Level 0) total number of sectors is 4227328 (2064 MB) raid0 (root): (RAID Level 1) total number of sectors is 485622912 (237120 MB) as root dkcsum: wd0 matched BIOS disk 80 dkcsum: wd1 matched BIOS disk 81 rootdev=0x1300 rrootdev=0x3600 rawdev=0x3602 raid0: Device already configured! raid1: Device already configured! TIA-- -- Best regards, Ken Gunderson Q: Because it reverses the logical flow of conversation. A: Why is putting a reply at the top of the message frowned upon?