Hi misc@, I'm trying to mount 2 external devices at umass(4) but I'm receiving:
$ sudo mount /dev/sd0a sd0a mount_ffs: /dev/sd0a on /home/dbolgheroni/sd0a: Invalid argument $ I had this issue before, but I was trying to mount another filesystem (NTFS IIRC). As Jacob Meuser pointed in http://marc.info/?l=openbsd-misc&m=129513475705242&w=2 there are multiple filesystems having this issue on umass(4). At first, I thought this was a filesystem-specific, but I can mount these devices in amd64 and also i386, both running -current. Are there a workaround for this? Thank you. [ using 480932 bytes of bsd ELF symbol table ] console out [ATY,Rage128k]console in [keyboard] , using USB : memaddr 94000000 size 4000000, : consaddr 94008000, : ioaddr 90020000, size 20000: memtag 8000, iotag 8000: width 1024 linebytes 1024 height 768 depth 8 Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2011 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 4.9-current (GENERIC) #10: Wed Apr 13 10:58:09 MDT 2011 dera...@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GENERIC real mem = 335544320 (320MB) avail mem = 311046144 (296MB) mainbus0 at root: model PowerMac2,1 cpu0 at mainbus0: 750 (Revision 0x202): 350 MHz: 512KB backside cache mem0 at mainbus0 spdmem0 at mem0: 256MB SDRAM non-parity PC133CL2 spdmem1 at mem0: 64MB SDRAM non-parity PC100CL3 memc0 at mainbus0: uni-n kiic0 at memc0 offset 0xf8001000 iic0 at kiic0 mpcpcibr0 at mainbus0 pci: uni-north, Revision 0xff pci0 at mpcpcibr0 bus 0 pchb0 at pci0 dev 11 function 0 "Apple Uni-N AGP" rev 0x00 vgafb0 at pci0 dev 16 function 0 "ATI Rage 128" rev 0x00, mmio wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation) mpcpcibr1 at mainbus0 pci: uni-north, Revision 0x0 pci1 at mpcpcibr1 bus 0 pchb1 at pci1 dev 11 function 0 "Apple Uni-N" rev 0x00 macobio0 at pci1 dev 23 function 0 "Apple Keylargo" rev 0x02 openpic0 at macobio0 offset 0x40000: version 0x4614 little endian macgpio0 at macobio0 offset 0x50 macgpio1 at macgpio0 irq 47 pgs0 at macgpio0: irq 55 "escc-legacy" at macobio0 offset 0x12000 not configured zsc0 at macobio0 offset 0x13000: irq 22,50 zstty0 at zsc0 channel 0 zstty1 at zsc0 channel 1 awacs0 at macobio0 offset 0x14000: irq 24,9,10 speaker audio0 at awacs0 "timer" at macobio0 offset 0x15000 not configured adb0 at macobio0 offset 0x16000 irq 25: via-pmu, 0 targets apm0 at adb0: battery flags 0x9, 0% charged kiic1 at macobio0 offset 0x18000 iic1 at kiic1 wdc0 at macobio0 offset 0x1f000 irq 19: DMA wd0 at wdc0 channel 0 drive 0: <Maxtor 6E040L0> wd0: 16-sector PIO, LBA, 39205MB, 80293248 sectors wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4 wdc1 at macobio0 offset 0x20000 irq 20: DMA wdc2 at macobio0 offset 0x21000 irq 21: DMA ohci0 at pci1 dev 24 function 0 "Apple USB" rev 0x00: irq 27, version 1.0 ohci1 at pci1 dev 25 function 0 "Apple USB" rev 0x00: irq 28, version 1.0 usb0 at ohci0: USB revision 1.0 uhub0 at usb0 "Apple OHCI root hub" rev 1.00/1.00 addr 1 usb1 at ohci1: USB revision 1.0 uhub1 at usb1 "Apple OHCI root hub" rev 1.00/1.00 addr 1 mpcpcibr2 at mainbus0 pci: uni-north, Revision 0x16 pci2 at mpcpcibr2 bus 0 pchb2 at pci2 dev 11 function 0 "Apple Uni-N Eth" rev 0x00 gem0 at pci2 dev 15 function 0 "Apple Uni-N GMAC" rev 0x00: irq 41, address 00:0a:27:d6:af:ae bmtphy0 at gem0 phy 0: BCM5201 10/100 PHY, rev. 2 uhub2 at uhub1 port 1 "ALCOR Generic USB Hub" rev 1.10/3.12 addr 2 uhidev0 at uhub2 port 3 configuration 1 interface 0 "Dell Dell USB Entry Keyboard" rev 1.10/1.78 addr 3 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes wskbd0 at ukbd0: console keyboard, using wsdisplay0 uhidev1 at uhub2 port 4 configuration 1 interface 0 "PIXART USB OPTICAL MOUSE" rev 1.10/1.00 addr 4 uhidev1: iclass 3/1 ums0 at uhidev1: 3 buttons, Z dir wsmouse0 at ums0 mux 0 vscsi0 at root scsibus0 at vscsi0: 256 targets softraid0 at root bootpath: /pci@f2000000/mac-io@17/ata-4@1f000/disk@0:/bsd.new root on wd0a swap on wd0b dump on wd0b