1. screen blacks out during boot -------------------------------- Still blacks out, but the location changed. This is the last line I see before the backlight turns off: ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x02: apic 4 int 17 (irq 10), AHCI 1.1 And this is the first line I see when the backlight turns back on: ahci0: PHY offline on port 1 This is interesting for two reasons: 1) unlike before, there are no lines between and 2) there's no overlap in the lines from before (weird) 2. no sound ----------- Still no sound Like reported lasted time, this may be due to the 'azalia' driver being used instead of the 'auich' driver. I deduced this before since sound worked under Linux where the audio device as "Intel Corp N10/ICH 7 Family HD Audio Controller (rev 02)". So, if "ICH7" is needed, then that implies it should be the 'auich' driver, right? 3. cf reader won't mount ------------------------ Still mounts as ugen0 4. can't disable power button ----------------------------- Still can't disable power button from initiating a shutdown - really, I don't know how - something in /etc/apm/ ? 5. resume didn't resume after long wait --------------------------------------- Can't reproduce (mentioned before) 6. can't re-enable wi-fi disabling via Fn-F3 -------------------------------------------- Still can't re-enable radio after disabling 7. Fn-F4 ("Zz") doesn't put computer to sleep --------------------------------------------- This button is still completely unresponsive New dmesg --------- OpenBSD 4.9-current (GENERIC.MP) #73: Tue Apr 19 13:34:15 MDT 2011 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP RTC BIOS diagnostic error 80<clock_battery> cpu0: Intel(R) Atom(TM) CPU N550 @ 1.50GHz ("GenuineIntel" 686-class) 1.50 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE real mem = 1061335040 (1012MB) avail mem = 1033809920 (985MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 10/07/10, SMBIOS rev. 2.6 @ 0xe80b0 (36 entries) bios0: vendor Acer version "V3.08(DDR3)" date 10/07/2010 bios0: Acer AOD255 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP HPET APIC MCFG SLIC BOOT SSDT WDAT acpi0: wakeup devices UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) ECHI(S3) EXP1(S4) EXP2(S0) EXP3(S4) EXP4(S4) AZAL(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 166MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Atom(TM) CPU N550 @ 1.50GHz ("GenuineIntel" 686-class) 1.50 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE cpu2 at mainbus0: apid 2 (application processor) cpu2: Intel(R) Atom(TM) CPU N550 @ 1.50GHz ("GenuineIntel" 686-class) 1.50 GHz cpu2: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Atom(TM) CPU N550 @ 1.50GHz ("GenuineIntel" 686-class) 1.50 GHz cpu3: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 4 acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (EXP1) acpiprt2 at acpi0: bus 2 (EXP2) acpiprt3 at acpi0: bus -1 (EXP3) acpiprt4 at acpi0: bus -1 (EXP4) acpiec0 at acpi0 acpicpu0 at acpi0: C3, C2, C1, PSS acpicpu1 at acpi0: C3, C2, C1, PSS acpicpu2 at acpi0: C3, C2, C1, PSS acpicpu3 at acpi0: C3, C2, C1, PSS acpipwrres0 at acpi0: FN00 acpitz0 at acpi0: critical temperature 100 degC acpibtn0 at acpi0: PWRB acpibtn1 at acpi0: SLPB acpibtn2 at acpi0: LID0 acpibat0 at acpi0: BAT0 model "13848633228217409" type Lion oem "SANYO " acpiac0 at acpi0: AC unit online acpivideo0 at acpi0: OVGA acpivout0 at acpivideo0: DD02 bios0: ROM list: 0xc0000/0xda00! cpu0: Enhanced SpeedStep 1497 MHz: speeds: 1500, 1000 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x02 vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x02 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp0 at vga1 agp0 at intagp0: aperture at 0x40000000, size 0x10000000 inteldrm0 at vga1: apic 4 int 16 (irq 11) drm0 at inteldrm0 "Intel Pineview Video" rev 0x02 at pci0 dev 2 function 1 not configured azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 4 int 19 (irq 11) azalia0: codecs: Realtek ALC272 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4 int 16 (irq 255) pci1 at ppb0 bus 1 "Attansic Technology L2C" rev 0xc1 at pci1 dev 0 function 0 not configured ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 4 int 17 (irq 255) pci2 at ppb1 bus 2 iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 1000" rev 0x00: apic 4 int 17 (irq 10), MIMO 1T2R, BGS, address 00:26:c7:97:94:a8 uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 int 18 (irq 11) uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int 20 (irq 10) uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 int 21 (irq 11) uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int 22 (irq 11) ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int 22 (irq 11) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 pci3 at ppb2 bus 5 pcib0 at pci0 dev 31 function 0 "Intel Tigerpoint LPC" rev 0x02 ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x02: apic 4 int 17 (irq 10), AHCI 1.1 ahci0: PHY offline on port 1 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0:<ATA, ST9250315AS, 0001> SCSI3 0/direct fixed naa.5000c5002b1ca6fd sd0: 238475MB, 512 bytes/sec, 488397168 sec total ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 4 int 17 (irq 10) iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 1GB DDR3 SDRAM PC3-10600 SO-DIMM usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support umass0 at uhub0 port 3 configuration 1 interface 0 "Generic USB2.0-CRW" rev 2.00/19.81 addr 2 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets, initiator 0 sd1 at scsibus1 targ 1 lun 0:<Generic-, SD/MMC, 1.00> SCSI0 0/direct removable serial.0bda0119:20090815198100000 sd1: 1938MB, 512 bytes/sec, 3970048 sec total uvideo0 at uhub0 port 4 configuration 1 interface 0 "XPA5S2FLZ 1.3M WebCam" rev 2.00/0.09 addr 3 video0 at uvideo0 uhidev0 at uhub1 port 1 configuration 1 interface 0 "Logitech Trackball" rev 1.10/2.20 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z dir wsmouse1 at ums0 mux 0 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root root on sd1a swap on sd1b dump on sd1b
A couple listers suggested trying -current, so here it is again on a 4.9
snapshot dated 201104119 (summary: no change, all issues still present)
- issues with acer aspire one Kent Watsen
- Re: issues with acer aspire one (now tested with -curren... Kent Watsen