Hello, misc! I use a svnd-based, encrypted disk with a few partitions on it since more than a year, which used to work just fine. But with the snapshot from April 14 and also with the latest snapshot from April 21 I can only mount one partition at a time now. Do I do something wrong, or is this a bug? Or is this an expected result of the recent vnd/svnd changes and I need to change the way I use vnd/svnd?
Thank you for your help! Details below. Tas. I use /dev/wd0l on the physical harddisk as storage space. To open the encrypted volume, I copy and paste all the commands from a text file. I open the volume with (with the correct /tmp/foo file in place): vnconfig -c -K 99999 -S /tmp/foo svnd3 /dev/wd0l snvd3 looks like this: # fdisk svnd3 Disk: svnd3 geometry: 1230051/1/100 [123005169 Sectors] Offset: 0 Signature: 0xAA55 Starting Ending LBA Info: #: id C H S - C H S [ start: size ] ------------------------------------------------------------------------------- 0: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused 1: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused 2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused *3: A6 1 0 1 - 1230050 0 100 [ 100: 123005000 ] OpenBSD # disklabel svnd3 # /dev/rsvnd3c: type: vnd disk: vnd device label: fictitious duid: 79c8276b51852fc4 flags: bytes/sector: 512 sectors/track: 100 tracks/cylinder: 1 sectors/cylinder: 100 cylinders: 335543 total sectors: 123005169 boundstart: 100 boundend: 123005100 drivedata: 0 16 partitions: # size offset fstype [fsize bsize cpg] a: 9586800 100 4.2BSD 2048 16384 1 c: 123005169 0 unused d: 9586800 9586900 4.2BSD 2048 16384 1 e: 103831400 19173700 4.2BSD 2048 16384 38128 Partitions are fine: # fsck /dev/svnd3{a,d,e} ** /dev/rsvnd3a ** File system is clean; not checking ** /dev/rsvnd3d ** File system is clean; not checking ** /dev/rsvnd3e ** File system is clean; not checking I used to mount all three partitions with: mount -o nodev,nosuid /dev/svnd3a /data/1 mount -o nodev,nosuid /dev/svnd3d /data/2 mount -o nodev,nosuid /dev/svnd3e /data/3 That worked fine so far and all three partitions got mounted. But now I can still mount all partitions, but only one at a time. With the commands from above I get: # mount -o nodev,nosuid /dev/svnd3a /data/1 # mount -o nodev,nosuid /dev/svnd3d /data/2 mount_ffs: /dev/svnd3d on /data/2: Device busy # mount -o nodev,nosuid /dev/svnd3e /data/3 mount_ffs: /dev/svnd3e on /data/3: Device busy Only /data/1 gets mounted. To mount the other ones, I first need to umount /data/1 now. # dmesg OpenBSD 4.9-current (GENERIC.MP) #81: Thu Apr 21 00:10:03 MDT 2011 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Genuine Intel(R) CPU 1400 @ 1.83GHz ("GenuineIntel" 686-class) 1.84 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR,PDCM real mem = 2114367488 (2016MB) avail mem = 2069610496 (1973MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 07/29/05, SMBIOS rev. 2.4 @ 0xe73f0 (39 entries) bios0: vendor Apple Computer, Inc. version "MM11.88Z.0055.B08.0610121326" date 10/12/06 bios0: Apple Computer, Inc. Macmini1,1 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP HPET APIC MCFG ASF! SBST ECDT SSDT SSDT SSDT acpi0: wakeup devices PXS1(S4) PXS2(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB7(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 166MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Genuine Intel(R) CPU 1400 @ 1.83GHz ("GenuineIntel" 686-class) 1.84 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR,PDCM ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 1 acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpiec0 at acpi0acpiec _REG failed, broken BIOS acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (RP01) acpiprt2 at acpi0: bus 2 (RP02) acpiprt3 at acpi0: bus 3 (PCIB) acpicpu0 at acpi0: C2, C1, PSS acpicpu1 at acpi0: C2, C1, PSS acpibtn0 at acpi0: PWRB acpivideo0 at acpi0: GFX0 bios0: ROM list: 0xc0000/0xe600! cpu0: Enhanced SpeedStep 1834 MHz: speeds: 1833, 1667, 1500, 1333, 1000 MHz memory map conflict 0xe00f8000/0x1000 memory map conflict 0xfed1c000/0x4000 memory map conflict 0xfffb0000/0x30000 pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03 vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp0 at vga1 agp0 at intagp0: aperture at 0x80000000, size 0x10000000 inteldrm0 at vga1: apic 1 int 16 (irq 10) drm0 at inteldrm0 vendor "Intel", unknown product 0x27a3 (class DASP subclass Time and Frequency, rev 0x03) at pci0 dev 7 function 0 not configured azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 1 int 22 (irq 11) azalia0: codecs: Sigmatel STAC9220/1 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 1 int 17 (irq 11) pci1 at ppb0 bus 1 mskc0 at pci1 dev 0 function 0 "Marvell Yukon 88E8053" rev 0x22, Yukon-2 EC rev. A3 (0x2): apic 1 int 16 (irq 11) msk0 at mskc0 port A: address 00:16:cb:a7:46:69 eephy0 at msk0 phy 0: 88E1111 Gigabit PHY, rev. 2 ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 1 int 16 (irq 10) pci2 at ppb1 bus 2 ath0 at pci2 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 1 int 17 (irq 11) ath0: AR5424 10.3 phy 6.1 rf 10.2, WORAW, address 00:17:f2:4d:19:ee uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 21 (irq 11) uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 19 (irq 11) uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18 (irq 11) uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 16 (irq 10) ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 21 (irq 11) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 pci3 at ppb2 bus 3 "AT&T/Lucent FW322 1394" rev 0x61 at pci3 dev 3 function 0 not configured ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-R UJ-846, FM3J> ATAPI 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 pciide0: channel 1 disabled (no drives) pciide1 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using apic 1 int 19 (irq 11) for native-PCI interrupt wd0 at pciide1 channel 0 drive 1: <Hitachi HTS541210H9SA00> wd0: 16-sector PIO, LBA48, 95396MB, 195371568 sectors wd0(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5 ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1 int 19 (irq 11) iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support uhidev0 at uhub4 port 1 configuration 1 interface 0 "Apple Computer ADB device" rev 2.00/19.65 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes wskbd0 at ukbd0: console keyboard, using wsdisplay0 uhidev1 at uhub4 port 1 configuration 1 interface 1 "Apple Computer ADB device" rev 2.00/19.65 addr 2 uhidev1: iclass 3/1 ums0 at uhidev1: 5 buttons wsmouse0 at ums0 mux 0 uhidev2 at uhub4 port 2 configuration 1 interface 0 "Apple Computer, Inc. IR Receiver" rev 2.00/1.10 addr 3 uhidev2: iclass 3/0, 38 report ids uhid0 at uhidev2 reportid 36: input=4, output=0, feature=0 uhid1 at uhidev2 reportid 37: input=4, output=0, feature=0 uhid2 at uhidev2 reportid 38: input=4, output=0, feature=0 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root root on wd0a swap on wd0b dump on wd0b