Hi,
trying to boot my Sun Ultra45 workstation from install49.iso results in this:
ok reset-all
Sun Ultra 45 Workstation, No Keyboard
Copyright 2006 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.22.19, 8192 MB memory installed, Serial #69377208.
Ethernet address 0:14:4f:22:9c:b8, Host ID: 84229cb8.
ok boot cdrom
Boot device: /pci@1e,600000/pci@0/pci@1/pci@0/ide@1f/cdrom@0,0:f File and
args:
OpenBSD IEEE 1275 Bootblock 1.3
..>> OpenBSD BOOT 1.4
Trying bsd...
Booting /pci@1e,600000/pci@0/pci@1/pci@0/ide@1f/cdrom@0,0:f/bsd
3785400@0x1000000+7496@0x139c2b8+3255032@0x1800000+939272@0x1b1aaf8
symbols @ 0xfefbc240 65 start=0x1000000
console is /ebus@1f,464000/serial@2,80
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2011 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.9 (RAMDISK) #517: Wed Mar 2 07:49:10 MST 2011
dera...@sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/RAMDISK
real mem = 8589934592 (8192MB)
avail mem = 8447508480 (8056MB)
mainbus0 at root: Sun Ultra 45 Workstation
cpu0 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1600 MHz
cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64
b/l)
"memory-controller" at mainbus0 not configured
pyro0 at mainbus0: "Fire", rev 3, ign 780, bus A 2 to 12
pyro0: dvma map c0000000-ffffffff
pci0 at pyro0
ppb0 at pci0 dev 0 function 0 "PLX PEX 8532" rev 0xaa
pci1 at ppb0 bus 3
ppb1 at pci1 dev 1 function 0 "PLX PEX 8532" rev 0xaa
pci2 at ppb1 bus 4
ppb2 at pci2 dev 0 function 0 "Acer Labs M5249 PCI-PCI" rev 0x00
pci3 at ppb2 bus 5
ohci0 at pci3 dev 28 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x780,
version 1.0, legacy support
ohci1 at pci3 dev 28 function 1 "Acer Labs M5237 USB" rev 0x03: ivec 0x780,
version 1.0, legacy support
ohci2 at pci3 dev 28 function 2 "Acer Labs M5237 USB" rev 0x03: ivec 0x780,
version 1.0, legacy support
ehci0 at pci3 dev 28 function 3 "Acer Labs M5239 USB2" rev 0x01: ivec 0x781
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Acer Labs EHCI root hub" rev 2.00/1.00 addr 1
"Acer Labs M5455 Audio" rev 0x21 at pci3 dev 29 function 0 not configured
"Acer Labs M7101 Power" rev 0x00 at pci3 dev 30 function 1 not configured
pciide0 at pci3 dev 31 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc8: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 0x784 for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-845S, D100> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
ppb3 at pci1 dev 2 function 0 "PLX PEX 8532" rev 0xaa
pci4 at ppb3 bus 6
ppb4 at pci4 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb3
pci5 at ppb4 bus 7
bge0 at pci5 dev 4 function 0 "Broadcom BCM5715" rev 0xa2, BCM5715 A1
(0x9001): ivec 0x796, address 00:14:4f:22:9c:b8
brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
bge1 at pci5 dev 4 function 1 "Broadcom BCM5715" rev 0xa2, BCM5715 A1
(0x9001): ivec 0x797, address 00:14:4f:22:9c:b9
brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
ppb5 at pci1 dev 3 function 0 "PLX PEX 8532" rev 0xaa: ivec 0x796
pci6 at ppb5 bus 8
ppb6 at pci1 dev 8 function 0 "PLX PEX 8532" rev 0xaa: ivec 0x794
pci7 at ppb6 bus 9
ppb7 at pci1 dev 9 function 0 "PLX PEX 8532" rev 0xaa
pci8 at ppb7 bus 10
ppb8 at pci8 dev 0 function 0 "Intel 41210 PCIE-PCIX" rev 0x09
pci9 at ppb8 bus 11
mpi0 at pci9 dev 1 function 0 "Symbios Logic SAS1064" rev 0x02: ivec 0x78f
scsibus1 at mpi0: 63 targets
sd0 at scsibus1 targ 0 lun 0: <SEAGATE, ST914602SSUN146G, 0603> SCSI3 0/direct
fixed
sd0: 140009MB, 512 bytes/sec, 286739329 sec total
ppb9 at pci8 dev 0 function 2 "Intel 41210 PCIE-PCIX" rev 0x09
pci10 at ppb9 bus 12
radeonfb0 at pci10 dev 2 function 0 "ATI Radeon VE" rev 0x00
radeonfb0: SUNW,375-3290, 1152x900
wsdisplay0 at radeonfb0
wsdisplay0: screen 0 added (std, sun emulation)
pyro1 at mainbus0: "Fire", rev 3, ign 7c0, bus B 2 to 255
pyro1: dvma map c0000000-ffffffff
pci11 at pyro1
ebus0 at mainbus0: ign 7c0
"flashprom" at ebus0 addr 0-1fffff not configured
rtc0 at ebus0 addr 100000-10000f: bq4802
com0 at ebus0 addr 80-87 ivec 0x8: st16650, no working fifo
com0: console
com1 at ebus0 addr 0-7 ivec 0x8: st16650, no working fifo
"env-monitor" at ebus0 addr 0-41 not configured
"i2c" at ebus0 addr 80-81 ivec 0x1 not configured
"power" at ebus0 addr e0-e1 ivec 0x3 not configured
"i2c" at mainbus0 not configured
"i2c" at mainbus0 not configured
"i2c" at mainbus0 not configured
"ppm" at mainbus0 not configured
data error type 32 sfsr=80800c sfva=4004fba0001 afsr=10080005000000
afva=7f8100012c0 tf=0xe0017aa8
panic: data fault: pc=101b430 addr=4004fba0001 sfsr=80800c<TM,PRIV,W>
halted
Program terminated
ok
any ideas ?
/Pete
