Hi all, Usbutils, is ok.
Connect your galaxy, phone will open pop-up to select activate mass-storage-to-usb, validate it. On computer, juste mount it then from usb device. for mine (samsung galaxy 1srt version (i7500 i think) android 1.5), I used 1rst time usbctl, now I can simply use mount /dev/sdb1 /mnt then /mnt is mass-storage from phone, /mnt/SDCARD is the SDcard inserted into the phone > ---------------------------------------- > From: vovka <net.v...@gmail.com> > Sent: Wed May 04 06:18:54 CEST 2011 > To: <misc@openbsd.org> > Subject: Re: Samsung Galaxy S USB Tethering (patch) > > > On Tue, May 3, 2011 at 21:05, Stuart Henderson <s...@spacehopper.org> wrote: > > > On 2011-05-03, Markus Bergkvist <markus.bergkv...@telia.com> wrote: > > > On 05/03/11 22:13, Stuart Henderson wrote: > > >> vovka<net.vlad<at> gmail.com> writes: > > >>> On Sat, Apr 30, 2011 at 18:08, Erik Mugele<ejm<at> teuton.org> > > wrote: > > >>>> The following patch against -current enables the Samsung Galaxy S > > >>>> Android device (Samsung Captivate with AT&T) to be be used for USB > > >>>> tethering. > > >>> Erik, great work and great patch... I, too, have a Samsung Galaxy > > S. > > >>> Your patch did not apply correctly, so here is my version of it.I've > > also > > >>> attached a diff of "usbdevs.h" . > > >> > > >> Please pkg_add usbutil, then identify the relevant /dev/usbX controller > > >> device (from "usbdevs -v" output), run "usbctl -f /dev/usbX", and > > include > > >> the output. If other people with different Android phones that support > > >> this mode of tethering could do the same, we may be able to identify > > >> a suitable class id we can match on instead. > > >> > > >> > > > > > > Is this sufficient? > > > > > > hmm, not sure.. from what I was reading there should be some > > communications device class interface showing up and here's there's > > just mass-storage. is there some different mode you need to select > > on the phone to use tethering? (I haven't used any android phone). > > > > > ---------- > > > > There are three (3) modes, excluding USB DEBUG. Those are KIES(firmware > update), Mass Storage, and Media Player.... > I've tested with USB DEBUG on/off and have been successful in tethering the > phone. I have a T-Mobile Vibrant, which is their version of the Galaxy S. > > Output of 'usbctl -f /dev/usbX' with USB DEBUG enabled. > > DEVICE addr 1 > DEVICE descriptor: > bLength=18 bDescriptorType=device(1) bcdUSB=2.00 bDeviceClass=9 > bDeviceSubClass=0 > bDeviceProtocol=1 bMaxPacketSize=64 idVendor=0x8086 idProduct=0x0000 > bcdDevice=100 > iManufacturer=1(Intel) iProduct=2(EHCI root hub) iSerialNumber=0() > bNumConfigurations=1 > > CONFIGURATION descriptor 0: > bLength=9 bDescriptorType=config(2) wTotalLength=25 bNumInterface=1 > bConfigurationValue=1 iConfiguration=0() bmAttributes=40 bMaxPower=0 mA > > INTERFACE descriptor 0: > bLength=9 bDescriptorType=interface(4) bInterfaceNumber=0 > bAlternateSetting=0 > bNumEndpoints=1 bInterfaceClass=9 bInterfaceSubClass=0 > bInterfaceProtocol=0 iInterface=0() > > ENDPOINT descriptor: > bLength=7 bDescriptorType=endpoint(5) bEndpointAddress=1-in > bmAttributes=interrupt wMaxPacketSize=8 bInterval=255 > > current configuration 1 > > HUB descriptor: > bDescLength=11 bDescriptorType=41 bNbrPorts=8 wHubCharacteristics=80 > bPwrOn2PwrGood=200 bHubContrCurrent=0 DeviceRemovable=0 > > Hub status 0000 0000 > > Port 1 status=0500 change=0000 > > Port 2 status=0503 change=0000 > > Port 3 status=0500 change=0000 > > Port 4 status=0500 change=0000 > > Port 5 status=0500 change=0000 > > Port 6 status=0500 change=0000 > > Port 7 status=0500 change=0000 > > Port 8 status=0500 change=0000 > > ---------- > DEVICE addr 2 > DEVICE descriptor: > bLength=18 bDescriptorType=device(1) bcdUSB=2.00 bDeviceClass=2 > bDeviceSubClass=0 > bDeviceProtocol=0 bMaxPacketSize=64 idVendor=0x04e8 idProduct=0x6881 > bcdDevice=400 > iManufacturer=1(SAMSUNG) iProduct=2(SAMSUNG_Android) > iSerialNumber=3(T959f0b2b5f4) bNumConfigurations=1 > > CONFIGURATION descriptor 0: > bLength=9 bDescriptorType=config(2) wTotalLength=67 bNumInterface=2 > bConfigurationValue=6 iConfiguration=0() bmAttributes=c0 bMaxPower=96 mA > > INTERFACE descriptor 0: > bLength=9 bDescriptorType=interface(4) bInterfaceNumber=0 > bAlternateSetting=0 > bNumEndpoints=1 bInterfaceClass=2 bInterfaceSubClass=2 > bInterfaceProtocol=255 iInterface=9(RNDIS Communications Control) > > CDC INTERFACE descriptor: > bLength=5 bDescriptorType=cs_interface(36) bDescriptorSubtype=header > bcdCDC=1.10 > > CDC INTERFACE descriptor: > bLength=5 bDescriptorType=cs_interface(36) > bDescriptorSubtype=Call_Management > bmCapabilities=0x0 bDataInterface=1 > > CDC INTERFACE descriptor: > bLength=4 bDescriptorType=cs_interface(36) > bDescriptorSubtype=Abstract_Control_Model > bmCapabilities=0x0 > > CDC INTERFACE descriptor: > bLength=5 bDescriptorType=cs_interface(36) bDescriptorSubtype=union > bMasterInterface=0 bSlaveInterface0=1 > > ENDPOINT descriptor: > bLength=7 bDescriptorType=endpoint(5) bEndpointAddress=9-in > bmAttributes=interrupt wMaxPacketSize=8 bInterval=9 > > INTERFACE descriptor 1: > bLength=9 bDescriptorType=interface(4) bInterfaceNumber=1 > bAlternateSetting=0 > bNumEndpoints=2 bInterfaceClass=10 bInterfaceSubClass=0 > bInterfaceProtocol=0 iInterface=10(RNDIS Ethernet Data) > > ENDPOINT descriptor: > bLength=7 bDescriptorType=endpoint(5) bEndpointAddress=14-in > bmAttributes=bulk wMaxPacketSize=512 bInterval=0 > > ENDPOINT descriptor: > bLength=7 bDescriptorType=endpoint(5) bEndpointAddress=13-out > bmAttributes=bulk wMaxPacketSize=512 bInterval=0 > > current configuration 6 > DEVICE addr 1 > DEVICE descriptor: > bLength=18 bDescriptorType=device(1) bcdUSB=2.00 bDeviceClass=9 > bDeviceSubClass=0 > bDeviceProtocol=1 bMaxPacketSize=64 idVendor=0x8086 idProduct=0x0000 > bcdDevice=100 > iManufacturer=1(Intel) iProduct=2(EHCI root hub) iSerialNumber=0() > bNumConfigurations=1 > > CONFIGURATION descriptor 0: > bLength=9 bDescriptorType=config(2) wTotalLength=25 bNumInterface=1 > bConfigurationValue=1 iConfiguration=0() bmAttributes=40 bMaxPower=0 mA > > INTERFACE descriptor 0: > bLength=9 bDescriptorType=interface(4) bInterfaceNumber=0 > bAlternateSetting=0 > bNumEndpoints=1 bInterfaceClass=9 bInterfaceSubClass=0 > bInterfaceProtocol=0 iInterface=0() > > ENDPOINT descriptor: > bLength=7 bDescriptorType=endpoint(5) bEndpointAddress=1-in > bmAttributes=interrupt wMaxPacketSize=8 bInterval=255 > > current configuration 1 > > HUB descriptor: > bDescLength=11 bDescriptorType=41 bNbrPorts=8 wHubCharacteristics=80 > bPwrOn2PwrGood=200 bHubContrCurrent=0 DeviceRemovable=0 > > Hub status 0000 0000 > > Port 1 status=0500 change=0000 > > Port 2 status=0503 change=0000 > > Port 3 status=0500 change=0000 > > Port 4 status=0500 change=0000 > > Port 5 status=0500 change=0000 > > Port 6 status=0500 change=0000 > > Port 7 status=0500 change=0000 > > Port 8 status=0500 change=0000 > > ---------- > DEVICE addr 2 > DEVICE descriptor: > bLength=18 bDescriptorType=device(1) bcdUSB=2.00 bDeviceClass=2 > bDeviceSubClass=0 > bDeviceProtocol=0 bMaxPacketSize=64 idVendor=0x04e8 idProduct=0x6881 > bcdDevice=400 > iManufacturer=1(SAMSUNG) iProduct=2(SAMSUNG_Android) > iSerialNumber=3(T959f0b2b5f4) bNumConfigurations=1 > > CONFIGURATION descriptor 0: > bLength=9 bDescriptorType=config(2) wTotalLength=67 bNumInterface=2 > bConfigurationValue=6 iConfiguration=0() bmAttributes=c0 bMaxPower=96 mA > > INTERFACE descriptor 0: > bLength=9 bDescriptorType=interface(4) bInterfaceNumber=0 > bAlternateSetting=0 > bNumEndpoints=1 bInterfaceClass=2 bInterfaceSubClass=2 > bInterfaceProtocol=255 iInterface=9(RNDIS Communications Control) > > CDC INTERFACE descriptor: > bLength=5 bDescriptorType=cs_interface(36) bDescriptorSubtype=header > bcdCDC=1.10 > > CDC INTERFACE descriptor: > bLength=5 bDescriptorType=cs_interface(36) > bDescriptorSubtype=Call_Management > bmCapabilities=0x0 bDataInterface=1 > > CDC INTERFACE descriptor: > bLength=4 bDescriptorType=cs_interface(36) > bDescriptorSubtype=Abstract_Control_Model > bmCapabilities=0x0 > > CDC INTERFACE descriptor: > bLength=5 bDescriptorType=cs_interface(36) bDescriptorSubtype=union > bMasterInterface=0 bSlaveInterface0=1 > > ENDPOINT descriptor: > bLength=7 bDescriptorType=endpoint(5) bEndpointAddress=9-in > bmAttributes=interrupt wMaxPacketSize=8 bInterval=9 > > INTERFACE descriptor 1: > bLength=9 bDescriptorType=interface(4) bInterfaceNumber=1 > bAlternateSetting=0 > bNumEndpoints=2 bInterfaceClass=10 bInterfaceSubClass=0 > bInterfaceProtocol=0 iInterface=10(RNDIS Ethernet Data) > > ENDPOINT descriptor: > bLength=7 bDescriptorType=endpoint(5) bEndpointAddress=14-in > bmAttributes=bulk wMaxPacketSize=512 bInterval=0 > > ENDPOINT descriptor: > bLength=7 bDescriptorType=endpoint(5) bEndpointAddress=13-out > bmAttributes=bulk wMaxPacketSize=512 bInterval=0 > > current configuration 6 > > ---------- > > > > Consequently, with 'USB DEBUG' enabled/disabled, the dmesg output is the > same: > > urndis0 at uhub0 port 2 configuration 6 interface 0 "SAMSUNG > SAMSUNG_Android" rev 2.00/4.00 addr 2 > urndis0: address de:6f:56:ac:66:af > > ---------- > > I am running -current as of May 2nd. > > DMESG: > > OpenBSD 4.9-current (ORION) #2: Mon May 2 15:10:44 EDT 2011 > r...@orion.vladnet.org:/usr/src/sys/arch/amd64/compile/ORION > real mem = 3218931712 (3069MB) > avail mem = 3119198208 (2974MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (68 entries) > bios0: vendor LENOVO version "79ETE6WW (2.26 )" date 04/01/2010 > bios0: LENOVO 20078HU > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT SSDT > SSDT SSDT SSDT > acpi0: wakeup devices LID_(S3) SLPB(S3) LURT(S3) DURT(S3) EXP0(S4) > EXP1(S4) EXP2(S4) EXP3(S4) PCI1(S4) USB0(S3) USB1(S3) USB2(S3) > USB7(S3) HDEF(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpiec0 at acpi0 > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz, 2327.92 MHz > cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3 ,CX16,xTPR,PDCM,NXE,LONG > cpu0: 4MB 64b/line 16-way L2 cache > cpu0: apic clock running at 166MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz, 2327.50 MHz > cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3 ,CX16,xTPR,PDCM,NXE,LONG > cpu1: 4MB 64b/line 16-way L2 cache > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins > ioapic0: misconfigured as apic 2, remapped to apid 1 > acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (AGP_) > acpiprt2 at acpi0: bus 2 (EXP0) > acpiprt3 at acpi0: bus 3 (EXP1) > acpiprt4 at acpi0: bus 4 (EXP2) > acpiprt5 at acpi0: bus 12 (EXP3) > acpiprt6 at acpi0: bus 21 (PCI1) > acpicpu0 at acpi0: C3, C2, C1, PSS > acpicpu1 at acpi0: C3, C2, C1, PSS > acpipwrres0 at acpi0: PUBS > acpitz0 at acpi0: critical temperature 127 degC > acpitz1 at acpi0: critical temperature 99 degC > acpibtn0 at acpi0: LID_ > acpibtn1 at acpi0: SLPB > acpibat0 at acpi0: BAT0 model "92P1133" serial 1658 type LION oem "Panasonic" > acpibat1 at acpi0: BAT1 not present > acpiac0 at acpi0: AC unit online > acpithinkpad0 at acpi0 > acpidock0 at acpi0: GDCK not docked (0) > cpu0: Enhanced SpeedStep 2327 MHz: speeds: 2333, 2000, 1667, 1333, 1000 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03 > ppb0 at pci0 dev 1 function 0 "Intel 82945GM PCIE" rev 0x03: apic 1 int 16 > pci1 at ppb0 bus 1 > vga1 at pci1 dev 0 function 0 "ATI Mobility FireGL V5250" rev 0x00 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > radeondrm0 at vga1: apic 1 int 16 > drm0 at radeondrm0 > azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: > apic 1 int 17 > azalia0: codecs: Analog Devices AD1981HD, Conexant/0x2bfa, using > Analog Devices AD1981HD > audio0 at azalia0 > ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 1 int 20 > pci2 at ppb1 bus 2 > em0 at pci2 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00: > apic 1 int 16, address 00:15:58:86:93:88 > ppb2 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 1 int 21 > pci3 at ppb2 bus 3 > wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: > apic 1 int 17, MoW1, address 00:1b:77:11:93:bf > ppb3 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 1 int 22 > pci4 at ppb3 bus 4 > ppb4 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 1 int 23 > pci5 at ppb4 bus 12 > uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 16 > uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 17 > uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18 > uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 19 > ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 19 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 > pci6 at ppb5 bus 21 > cbb0 at pci6 dev 0 function 0 "TI PCI1510 CardBus" rev 0x00: apic 1 int 16 > cardslot0 at cbb0 slot 0 flags 0 > cardbus0 at cardslot0: bus 22 device 0 cacheline 0x8, lattimer 0xb0 > pcmcia0 at cardslot0 > pcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02 > pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, > channel 0 configured to compatibility, channel 1 configured to > compatibility > atapiscsi0 at pciide0 channel 0 drive 0 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4083N, 1.08> ATAPI > 5/cdrom removable > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > pciide0: channel 1 ignored (disabled) > ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: apic 1 > int 16, AHCI 1.1 > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG HM161GI, 2AJ1> SCSI3 > 0/direct fixed naa.50024e90040dd156 > sd0: 152627MB, 512 bytes/sec, 312581808 sec total > ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1 int 23 > iic0 at ichiic0 > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci3: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > aps0 at isa0 port 0x1600/31 > mtrr: Pentium Pro MTRR support > ugen0 at uhub4 port 2 "STMicroelectronics Biometric Coprocessor" rev > 1.00/0.01 addr 2 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > root on sd0a swap on sd0b dump on sd0b > scsibus3 at softraid0: 1 targets > sd1 at scsibus3 targ 0 lun 0: <OPENBSD, SR CRYPTO, 004> SCSI2 0/direct fixed > sd1: 125510MB, 512 bytes/sec, 257044575 sec total > Cordialement Francois Pussault 3701 - 8 rue Marcel Pagnol 31100 ToulouseB FranceB +33 6 17 230 820 B +33 5 34 365 269 fpussa...@contactoffice.fr
