Thanks for your reply and I send my request to the misc list now! I've just installed openBSD on a AOD255E Netbook and I've some problem with Ethernet Card: Here's my dmesg : =========== OpenBSD 4.9 (GENERIC.MP) #794: Wed Mar 2 07:19:02 MST 2011 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP RTC BIOS diagnostic error 80<clock_battery> cpu0: Intel(R) Atom(TM) CPU N455 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,A CPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR ,PDCM,MOVBE real mem = 1061335040 (1012MB) avail mem = 1033818112 (985MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 01/10/11, SMBIOS rev. 2.6 @ 0xe80a0 (36 entries) bios0: vendor Acer version "V3.14(DDR3)" date 01/10/2011 bios0: Acer AOD255E acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP HPET APIC MCFG SLIC BOOT SSDT WDAT acpi0: wakeup devices UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) ECHI(S3) EXP1(S4) EXP2(S0) EXP3(S4) EXP4(S4) AZAL(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 166MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Atom(TM) CPU N455 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,A CPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR ,PDCM,MOVBE ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 4 acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (EXP1) acpiprt2 at acpi0: bus 2 (EXP2) acpiprt3 at acpi0: bus -1 (EXP3) acpiprt4 at acpi0: bus -1 (EXP4) acpiec0 at acpi0 acpicpu0 at acpi0: C3, C2, C1, PSS acpicpu1 at acpi0: C3, C2, C1, PSS acpipwrres0 at acpi0: FN00 acpitz0 at acpi0: critical temperature 100 degC acpibtn0 at acpi0: PWRB acpibtn1 at acpi0: SLPB acpibtn2 at acpi0: LID0 acpibat0 at acpi0: BAT0 model "13848628933250113" type Lion oem "SANYO " acpiac0 at acpi0: AC unit online acpivideo0 at acpi0: OVGA acpivout0 at acpivideo0: DD02 bios0: ROM list: 0xc0000/0xda00! 0xce000/0x1000 cpu0: Enhanced SpeedStep 1663 MHz: speeds: 1666, 1333, 1000 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x00 vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp0 at vga1 agp0 at intagp0: aperture at 0x40000000, size 0x10000000 inteldrm0 at vga1: apic 4 int 16 (irq 11) drm0 at inteldrm0 "Intel Pineview Video" rev 0x00 at pci0 dev 2 function 1 not configured azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 4 int 19 (irq 11) azalia0: codecs: Realtek ALC272 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4 int 16 (irq 255) pci1 at ppb0 bus 1 "Attansic Technology L2C" rev 0xc1 at pci1 dev 0 function 0 not configured ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 4 int 17 (irq 255) pci2 at ppb1 bus 2 athn0 at pci2 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 4 int 17 (irq 10) athn0: AR9285 rev 2 (1T1R), ROM rev 14, address 90:00:4e:6a:da:83 uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 int 18 (irq 11) uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int 20 (irq 10) uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 int 21 (irq 11) uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int 22 (irq 11) ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int 22 (irq 11) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 pci3 at ppb2 bus 5 pcib0 at pci0 dev 31 function 0 "Intel Tigerpoint LPC" rev 0x02 ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x02: apic 4 int 17 (irq 10), AHCI 1.1 ahci0: PHY offline on port 1 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD2500BEVT-2, 01.0> SCSI3 0/direct fixed sd0: 238475MB, 512 bytes/sec, 488397168 sec total ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 4 int 17 (irq 10) iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 1GB DDR3 SDRAM PC3-10600 SO-DIMM usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support uvideo0 at uhub0 port 4 configuration 1 interface 0 "AAB1W0102 1.3M HD WebCam" rev 2.00/0.02 addr 2 video0 at uvideo0 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root root on sd0a swap on sd0b dump on sd0b WARNING: / was not properly unmounted umass0 at uhub0 port 1 configuration 1 interface 0 "LaCie LaCie iamaKey" rev 2.00/1.00 addr 3 umass0: using SCSI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 sd1 at scsibus2 targ 1 lun 0: <LaCie, iamaKey, 0.00> SCSI2 0/direct removable sd1: 3855MB, 512 bytes/sec, 7897040 sec total sd1 detached scsibus2 detached umass0 detached umass0 at uhub1 port 1 configuration 1 interface 0 "PoinChips USB-Mass-storage" rev 1.10/1.00 addr 2 umass0: using ATAPI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 sd1 at scsibus2 targ 1 lun 0: <USB-DISK, FREEDIK-LWFORMAT, 1.00> ATAPI 0/direct removable sd1: 31MB, 512 bytes/sec, 63840 sec total ========== I'm newbies and I need some help and doc to know how to apply this diff and recompile the source code : http://marc.info/?l=openbsd-tech&m=129595134124076&w=2
Best regards, Jerome m. -----Urspr|ngliche Nachricht----- Von: roberth [mailto:rob...@openbsd.pap.st] Gesendet: Dienstag, 17. Mai 2011 20:54 An: Meyer Jerome Betreff: Re: Ethernet on AOD255E On Tue, 17 May 2011 17:30:30 +0200 "Meyer Jerome" <jerome.me...@iwbtelekom.ch> wrote: > Hello > > I've installed openBSD on a acer aspire one D255E and I've some > problem with the Ethernet LAN. > On the mailling-list in archive I saw the following message from > Kevin: > > *********************** > The following diff adds support for Atheros AR8151/AR8152 chipsets; > mostly from FreeBSD. It also fixes an issue i386/6311. > Tested on Acer AOD255E. > > Index: share/man/man4/alc.4 > =================================================================== > RCS file: /cvs/src/share/man/man4/alc.4,v > retrieving revision 1.2 > diff -u -p -r1.2 alc.4 > --- share/man/man4/alc.4 8 Aug 2009 14:12:41 -0000 1.2 > +++ share/man/man4/alc.4 25 Jan 2011 10:19:48 -0000 > @@ -19,7 +19,7 @@ > .Os > *********************** > But I'm new in openbsd world and I don't know exactly what to do? > What's exactly this alc.4 and where should I find it? > > Thanks for your help, > j.meyer > OFFLIST: Hi, alc is the driver, the diff you quoted from is for the manpage for alc, driver manpages live in section 4, that makes the filename alc.4. If you want to read the manpage: man alc You arent supplying the required ammount of information in your email to help you. Ppl would need to see a dmesg, that would clarify what OpenBSD release you are trying to install, and if the card is detected correctly. Btw, tech@ is the wrong list for your "issue", misc@ would be the list to contact, but include a dmesg. (Have a look at the FAQ) Cheers, Robert