This is expected, sound and i2c drivers are not included
on ramdisks, install the system and use GENERIC and they will appear.
On Fri, Jun 17, 2011 at 11:29:51AM +0300, Mihai Popescu wrote:
> Hello,
>
> I was trying to install OpenBSD-current on a Thinkpad T43, model
> 2669-R1G. I used the .iso file to create the CD-ROM and run it for
> install.
> The strange fact is that soundcard and SMBus devices are not
> configured. The hardware is Intel 82801FB with AD1981B AC97 v2.2.
> I searched about some problems like that, but I see people on internet
> having succes installing this kind of laptop. I also have a Dell
> Precision 307 workstation with the same chipset who is working fine.
> Any help will be welcome, please see the dmesg.
>
> OpenBSD 4.9-current (RAMDISK_CD) #64: Thu May 12 09:53:20 MDT 2011
> t...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
> cpu0: Intel(R) Pentium(R) M processor 1.86GHz ("GenuineIntel"
> 686-class) 1.87 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
> real mem = 1072099328 (1022MB)
> avail mem = 1047584768 (999MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 08/21/06, BIOS32 rev. 0 @
> 0xfd760, SMBIOS rev. 2.33 @ 0xe0010 (64 entries)
> bios0: vendor IBM version "1YET65WW (1.29 )" date 08/21/2006
> bios0: IBM 2669R1G
> apm0 at bios0: Power Management spec V1.2
> acpi at bios0 function 0x0 not configured
> pcibios0 at bios0: rev 2.1 @ 0xfd6f0/0x910
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdeb0/256 (14 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
> pcibios0: PCI bus #12 is the last bus
> bios0: ROM list: 0xc0000/0x10000 0xdc000/0x4000! 0xe0000/0x10000
> cpu0 at mainbus0: (uniprocessor)
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> io address conflict 0x5800/0x8
> io address conflict 0x5808/0x4
> io address conflict 0x5810/0x8
> io address conflict 0x580c/0x4
> pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x03
> ppb0 at pci0 dev 1 function 0 "Intel 82915GM PCIE" rev 0x03: irq 11
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M300 M22" rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> ppb1 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03: irq 11
> pci2 at ppb1 bus 2
> bge0 at pci2 dev 0 function 0 "Broadcom BCM5751M" rev 0x11, BCM5750 B1
> (0x4101): irq 11, address 00:15:58:09:c5:1d
> brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
> ppb2 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x03: irq 5
> pci3 at ppb2 bus 3
> uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 11
> uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 11
> uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 11
> uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 11
> ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 11
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
> pci4 at ppb3 bus 11
> cbb0 at pci4 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0x8d: irq 11
> iwi0 at pci4 dev 2 function 0 "Intel PRO/Wireless 2200BG" rev 0x05:
> irq 11, address 00:16:6f:14:95:fe
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 12 device 0 cacheline 0x0, lattimer 0xb0
> pcmcia0 at cardslot0
> "Intel 82801FB AC97" rev 0x03 at pci0 dev 30 function 2 not configured
> pcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03
> pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x03: DMA,
> channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <HTS541040G9AT00>
> wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-4242N, 0J05> ATAPI
> 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> "Intel 82801FB SMBus" rev 0x03 at pci0 dev 31 function 3 not configured
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> rd0: fixed, 3872 blocks
> softraid0 at root
> root on rd0a swap on rd0b dump on rd0b
> umass0 at uhub0 port 4 configuration 1 interface 0 "SanDisk Cruzer
> Micro" rev 2.00/2.00 addr 2
> umass0: using SCSI over Bulk-Only
> scsibus1 at umass0: 2 targets, initiator 0
> sd0 at scsibus1 targ 1 lun 0: <SanDisk, Cruzer Micro, 8.02> SCSI0
> 0/direct removable serial.07815151800815505A4B
> sd0: 7663MB, 512 bytes/sec, 15695871 sec total
