Hi Misc@,
Getting this panic over and over on a router. Something with uvm and
tcp_input. IPMI was enabled to get system sensors.
dmesg 29 May
------------
OpenBSD 4.9-current (GENERIC.MP) #20: Sun May 29 04:42:43 WIT 2011
r...@aggregation-rf.mygreenlinks.net:/usr/src/sys/arch/i386/compile/GENERIC.MP
RTC BIOS diagnostic error e<fixed_disk,invalid_time>
cpu0: Intel(R) Xeon(R) CPU E3110 @ 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX1
6,xTPR,PDCM,SSE4.1
real mem = 2143801344 (2044MB)
avail mem = 2097905664 (2000MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/12/07, SMBIOS rev. 2.5 @
0x7fdfd000 (63 entries)
bios0: vendor Intel Corporation version
"S3200X38.86B.00.00.0045.082820081329" date 08/28/2008
bios0: Intel Corporation S3210SH
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT SLIC FACP APIC WDDT MCFG HPET SPCR SSDT SSDT SSDT SSDT
SSDT HEST BERT ERST EINJ DMAR
acpi0: wakeup devices SLPB(S5) NPE1(S5) NPE6(S5) P32_(S5) PS2M(S1)
PS2K(S1) ILAN(S5) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(S5) PEX5(S5)
UHC1(S1) UHC2(S1) UHC3(S1) UH
C4(S1) EHCI(S1) EHC2(S1) UH42(S1) UHC5(S1) UHC6(S1) AZAL(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 332MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Xeon(R) CPU E3110 @ 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX1
6,xTPR,PDCM,SSE4.1
ioapic0 at mainbus0: apid 5 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 5
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (NPE1)
acpiprt2 at acpi0: bus 1 (NPE6)
acpiprt3 at acpi0: bus 4 (P32_)
acpiprt4 at acpi0: bus 2 (PEX0)
acpiprt5 at acpi0: bus -1 (PEX1)
acpiprt6 at acpi0: bus -1 (PEX2)
acpiprt7 at acpi0: bus -1 (PEX3)
acpiprt8 at acpi0: bus 3 (PEX4)
acpiprt9 at acpi0: bus -1 (PEX5)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x1000
0xca000/0x1000 0xcb000/0x1800 0xcc800/0x1000
ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca2/2 spacing 1
cpu0: Enhanced SpeedStep 2993 MHz: speeds: 3000, 2000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 3200/3210 Host" rev 0x00
ppb0 at pci0 dev 6 function 0 "Intel 3210 PCIE" rev 0x00: apic 5 int 16
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel PRO/1000 PT (82571EB)" rev 0x06: apic
5 int 16, address 00:24:81:7d:11:f4
em1 at pci1 dev 0 function 1 "Intel PRO/1000 PT (82571EB)" rev 0x06: apic
5 int 17, address 00:24:81:7d:11:f5
em2 at pci0 dev 25 function 0 "Intel ICH9 IGP AMT" rev 0x02: apic 5 int
20, address 00:15:17:8d:4c:c5
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 5 int 18
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 5 int 21
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 5 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 5 int 17
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: apic 5 int 17
pci3 at ppb2 bus 3
vga1 at pci3 dev 0 function 0 "Matrox MGA G200e (ServerEngines)" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci2 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 5 int 23
uhci3 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 5 int 19
uhci4 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 5 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 5 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci4 at ppb3 bus 4
em3 at pci4 dev 0 function 0 "Intel PRO/1000MT (82540EM)" rev 0x02: apic 5
int 16, address 00:07:e9:0f:44:37
skc0 at pci4 dev 1 function 0 "D-Link DGE-530T B1" rev 0x11, Yukon Lite
(0x9): apic 5 int 17
sk0 at skc0 port A: address 00:1b:11:10:07:6e
eephy0 at sk0 phy 0: 88E1011 Gigabit PHY, rev. 5
em4 at pci4 dev 2 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: apic 5
int 18, address 00:15:17:8d:4c:c3
ichpcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02: PM
disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 5 int 21 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <MAXTOR STM380215AS>
wd0: 16-sector PIO, LBA48, 76318MB, 156299375 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 5
int 18
iic0 at ichiic0
iic0: skipping sensors to avoid ipmi0 interactions
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM ECC PC2-5300CL5
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM ECC PC2-5300CL5
pciide1 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 5 int 21 for native-PCI interrupt
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
----------------------
Panic on 29 May Kernel
----------------------
uvm_fault(0xd0a16be0, 0xefffa000, 0, 1) -> d
kernel: page fault trap, code=0
Stoped at tcp_input+0x44a: movzbl 0xad(%edi),%eax
ddb{0}>
----------------------
ps on 29 May Kernel
----------------------
ddb{0}> ps
PID PPID PGRP UID S FLAGS
WAIT COMMAND
10095 18628 10095 1008 3 0x2000080 ttyin
ksh
18628 7307 7307 1008 3 0x2000080
select sshd
7307 8357 7307 0 3 0x2000080
netio sshd
8242 1 8242 0 3 0x2000080
ttyin getty
30121 1 30121 0 3 0x2000080
ttyin getty
2165 1 2165 0 3 0x2000080
select sendmail
17876 1 17876 0 3 0x2000080
nanosleep symon
3162 1 1 0 3 0x2000080
ttyopn getty
6334 1 6334 0 3 0x2000080
ttyin getty
5417 1 5417 0 3 0x2000080
ttyin getty
13655 1 13655 0 3 0x2000080
ttyin getty
12870 1 12870 0 3 0x2000080
ttyin getty
5130 1 5130 0 3 0x2000080
select cron
20031 1 20031 0 3 0x2000080
select inetd
15389 3025 3025 75 3 0x2000080
poll bgpd
9246 3025 3025 75 3 0x2000080
poll bgpd
3025 1 3025 0 3 0x2000080
poll bgpd
6121 2127 2127 85 3 0x2000080
kqread ospfd
6254 2127 2127 85 3 0x2000080
kqread ospfd
2127 1 2127 0 3 0x2000080
kqread ospfd
19047 26569 26569 98 3 0x2000080
kqread ldpd
11144 26569 26569 98 3 0x2000080
kqread ldpd
26569 1 26569 0 3 0x2000080
kqread ldpd
21326 7139 7139 91 3 0x2000080
kqread snmpd
7139 1 7139 0 3 0x2000080
kqread snmpd
8357 1 8357 0 3 0x2000080
select sshd
9636 28324 31568 83 3 0x2000080
poll ntpd
28328 31568 31568 83 3 0x2000080
poll ntpd
31568 1 31568 0 3 0x2000080
poll ntpd
11108 2517 2517 74 3 0x2000080
bpf pflogd
2517 1 2517 0 3 0x2000080
netio pflogd
14197 13930 13930 73 3 0x2000080
syslogd
13930 1 13930 0 3 0x2000088
netio syslogd
16 0 0 0 3 0x2100200
aiodoned aiodoned
15 0 0 0 3 0x2100200
syncer update
14 0 0 0 3 0x2100200
cleaner cleaner
13 0 0 0 3 0x100200
reaper reaper
12 0 0 0 3 0x2100200
pgdaemon pagedaemon
11 0 0 0 3 0x2100200
bored crypto
10 0 0 0 3 0x2100200
pftm pfpurge
9 0 0 0 3 0x2100200
usbtsk usbtask
8 0 0 0 3 0x2100200
usbatsk usbatsk
7 0 0 0 3 0x2100200
ipmi_poll ipmi0
6 0 0 0 3 0x2100200
acpi0 acpi0
5 0 0 0 3 0x40100200
idle1
4 0 0 0 3 0x2100200
bored syswq
* 3 0 0 0 3 0x40100200
idle0
2 0 0 0 3 0x2100200
kmalloc kmthread
1 0 0 0 3 0x2000080
wait iit
0 -1 0 0 3 0x2080200
scheduler swapper
----------------------
trace on 29 May Kernel
----------------------
ddb{0}> trace
tcp_input(d8840a00,14,0,0,d30ced08) at tcp_input+0x44a
ipv4_input(d8840a00,6,f5317ef4,d0442d05,d0203772) at ipv4_input+0x558
ipintr(d0203772,d2f79600,f5317f14,d057fbef,0) at ipintr+0x49
netintr(0,202,0,0,d020229a) at netintr+0xd5
softintr_dispatch(1) at softintr_dispatch+0x4f
Xsoftnet() at Xsoftnet+0x17
--- interrupt ---
cpu_idle_cycle(d0af7100) at cpu_idle_cycle+0xf
Bad frame pointer: 0xd0bafe48
We upgraded to 10 july Kernel, and still got this panic;
uvm_fault(0xd09fe5e0, 0xefffa000, 0, 1) -> d
kernel: page fault trap, code=0
stopped at tcp_input+0x44a; movzbl 0xad(%edi),%eax
--------------
DMESG 10 July
--------------
OpenBSD 4.9-current (GENERIC.MP) #21: Sun Jul 10 19:49:20 WIT 2011
r...@aggregation-rf.mygreenlinks.net:/usr/src/sys/arch/i386/compile/GENERIC.MP
RTC BIOS diagnostic error e<fixed_disk,invalid_time>
cpu0: Intel(R) Xeon(R) CPU E3110 @ 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S
SE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1
real mem = 2143801344 (2044MB)
avail mem = 2098655232 (2001MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/12/07, SMBIOS rev. 2.5 @
0x7fdfd000 (63 entries)
bios0: vendor Intel Corporation version
"S3200X38.86B.00.00.0045.082820081329" date 08/28/2008
bios0: Intel Corporation S3210SH
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT SLIC FACP APIC WDDT MCFG HPET SPCR SSDT SSDT SSDT SSDT
SSDT HEST BERT ERST EINJ DMAR
acpi0: wakeup devices SLPB(S5) NPE1(S5) NPE6(S5) P32_(S5) PS2M(S1)
PS2K(S1) ILAN(S5) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(
S5) PEX5(S5) UHC1(S1) UHC2(S1) UHC3(S1) UHC4(S1) EHCI(S1) EHC2(S1)
UH42(S1) UHC5(S1) UHC6(S1) AZAL(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 332MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Xeon(R) CPU E3110 @ 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S
SE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1
ioapic0 at mainbus0: apid 5 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 5
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (NPE1)
acpiprt2 at acpi0: bus 1 (NPE6)
acpiprt3 at acpi0: bus 4 (P32_)
acpiprt4 at acpi0: bus 2 (PEX0)
acpiprt5 at acpi0: bus -1 (PEX1)
acpiprt6 at acpi0: bus -1 (PEX2)
acpiprt7 at acpi0: bus -1 (PEX3)
acpiprt8 at acpi0: bus 3 (PEX4)
acpiprt9 at acpi0: bus -1 (PEX5)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x1000
0xca000/0x1000 0xcb000/0x1800 0xcc800/0x1000
ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca2/2 spacing 1
cpu0: Enhanced SpeedStep 2993 MHz: speeds: 3000, 2000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 3200/3210 Host" rev 0x00
ppb0 at pci0 dev 6 function 0 "Intel 3210 PCIE" rev 0x00: apic 5 int 16
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel PRO/1000 PT (82571EB)" rev 0x06: msi,
address 00:24:81:7d:11:f4
em1 at pci1 dev 0 function 1 "Intel PRO/1000 PT (82571EB)" rev 0x06: msi,
address 00:24:81:7d:11:f5
em2 at pci0 dev 25 function 0 "Intel ICH9 IGP AMT" rev 0x02: msi, address
00:15:17:8d:4c:c5
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 5 int 18
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 5 int 21
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 5 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 5 int 17
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: apic 5 int 17
pci3 at ppb2 bus 3
vga1 at pci3 dev 0 function 0 "Matrox MGA G200e (ServerEngines)" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci2 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 5 int 23
uhci3 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 5 int 19
uhci4 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 5 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 5 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci4 at ppb3 bus 4
em3 at pci4 dev 0 function 0 "Intel PRO/1000MT (82540EM)" rev 0x02: apic 5
int 16, address 00:07:e9:0f:44:37
skc0 at pci4 dev 1 function 0 "D-Link DGE-530T B1" rev 0x11, Yukon Lite
(0x9): apic 5 int 17
sk0 at skc0 port A: address 00:1b:11:10:07:6e
eephy0 at sk0 phy 0: 88E1011 Gigabit PHY, rev. 5
em4 at pci4 dev 2 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: apic 5
int 18, address 00:15:17:8d:4c:c3
ichpcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02: PM
disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured
to native-PCI
pciide0: using apic 5 int 21 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <MAXTOR STM380215AS>
wd0: 16-sector PIO, LBA48, 76318MB, 156299375 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 5
int 18
iic0 at ichiic0
iic0: skipping sensors to avoid ipmi0 interactions
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM ECC PC2-5300CL5
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM ECC PC2-5300CL5
pciide1 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-
PCI
pciide1: using apic 5 int 21 for native-PCI interrupt
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
scsibus1 at softraid0: 256 targets
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
Can't trace and ps since the guys at NOC didn't had the time to do so. We
are going to temporary disable the services on this machine until we able
to find a workaround. Any suggestion?
Best Regards,
Insan Praja SW
--
Using Opera's revolutionary email client: http://www.opera.com/mail/
