On Wed, Jul 20, 2011 at 9:20 PM, bsd user <bsd.u...@mail.ru> wrote: >> 20 I@LQ 2011, 23:00 OT David Coppa <dco...@gmail.com>: >> > On Wed, Jul 20, 2011 at 8:34 PM, bsd user <bsd.u...@mail.ru> wrote: >> > > Hi, >> > > I got E1750 with O2 and noticed it's not working with -current. Here is the >> > little patch, that should do the trick. >> > > Without this patch, device shows up as a sdX (just the flash part of device, >> > and /dev/cuaU0 is not set up) >> > > Cheers, >> > > Jurij >> > >> > Please, can you provide us a dmesg with your patch applied? > > I've snipped dmesg from unimportant things (hope that's not problem) > dmesg before patching: > ------- > umsm0 at uhub0 port 3 configuration 1 interface 0 "HUAWEI Technology HUAWEI Mobile" rev 2.00/0.00 addr 2 > umsm1 at uhub0 port 3 configuration 1 interface 1 "HUAWEI Technologies HUAWEI Mobile Modem" rev 2.00/0.00 addr 2 > umsm0 detached > umsm1 detached > umass0 at uhub0 port 3 configuration 1 interface 3 "HUAWEI Technology HUAWEI Mobile" rev 2.00/0.00 addr 2 > umass0: using SCSI over Bulk-Only > scsibus2 at umass0: 2 targets, initiator 0 > sd2 at scsibus2 targ 1 lun 0: <HUAWEI, SD Storage, 2.31> SCSI2 0/direct removable > ugen0 at uhub0 port 3 configuration 1 "HUAWEI Technology HUAWEI Mobile" rev 2.00/0.00 addr 2 > ------ > > and dmesg after patching: > ------ > umsm0 at uhub0 port 3 configuration 1 interface 0 "HUAWEI Technology HUAWEI Mobile" rev 2.00/0.00 addr 2 > umsm1 at uhub0 port 3 configuration 1 interface 1 "HUAWEI Technologies HUAWEI Mobile Modem" rev 2.00/0.00 addr 2 > umsm0 detached > umsm1 detached > umsm0 at uhub0 port 3 configuration 1 interface 0 "HUAWEI Technology HUAWEI Mobile" rev 2.00/0.00 addr 2 > ucom0 at umsm0 > umsm1 at uhub0 port 3 configuration 1 interface 1 "HUAWEI Technology HUAWEI Mobile" rev 2.00/0.00 addr 2 > ucom1 at umsm1 > umsm2 at uhub0 port 3 configuration 1 interface 2 "HUAWEI Technology HUAWEI Mobile" rev 2.00/0.00 addr 2 > ucom2 at umsm2 > umsm3 at uhub0 port 3 configuration 1 interface 3 "HUAWEI Technology HUAWEI Mobile" rev 2.00/0.00 addr 2 > ------ > >> > Is the device working with ppp? > Yes, it's working with ppp as /dev/cuaU0
Nice. If I'll have another ok, I'll commit your patch.. Thanks! David