Here we go again with more info. The facts:
-uftdi USB to 4 port serial.
-Adaptor attaches fine, works for a while.
-After an amount of time, when serial load increases, the driver may
fail.
-After the failure error is unrecoverable; detaching/reattaching device
doesn't work. Must reboot the computer to get working again.
-After failure usbdevs seems different! -No messages in console indicate
any device change whatsoever-.
Driver seems to work just fine under light load, and has a stealth fail
-no errors on message log-:
8<-----------------------
uftdi_read: sc=0xd1e78c00, port=1 count=5 data[0]=0x30
uftdi_read: sc=0xd1e78a80, port=1 count=2
uftdi_write: sc=0xd1e78f00, port=1 count=1 data[0]=0x0b
uftdi_write: sc=0xd1e78f00, port=1 count=1 data[0]=0x0a
uftdi_write: sc=0xd1e78f00, port=1 count=20 data[0]=0x31
uftdi_read: sc=0xd1e78f00, port=1 count=2
uftdi_write: sc=0xd1e78a80, port=1 count=3 data[0]=0x02
uftdi_write: sc=0xd1e78c00, port=1 count=6 data[0]=0x23
uftdi_read: sc=0xd1e78c00, port=1 count=2
uftdi_read: sc=0xd1e78a80, port=1 count=2
uftdi_write: sc=0xd1e78f00, port=1 count=1 data[0]=0x0b
uftdi_write: sc=0xd1e78c00, port=1 count=5 data[0]=0x23
uftdi_write: sc=0xd1e78a80, port=1 count=3 data[0]=0x02
-stopped here. Failed! 20lines/second. Three last lines delayed between
them about half a second-.
8<-----------------------
Before failure, usbdevs reads
8<-----------------------
$ usbdevs -v
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 addr 2: high speed, power 500 mA, config 1, USB Storage(0x0727),
Generic(0x05e3), rev 2.06, iSerialNumber 000000000206
port 7 powered
port 8 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 addr 2: low speed, power 100 mA, config 1, USB Keyboard(0x0408),
Chicony(0x04f2), rev 1.65
port 2 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 addr 2: full speed, self powered, config 1, HRS PRINTER(0x0013),
APS(0x1ad4), rev 1.00
port 2 addr 3: full speed, power 100 mA, config 1, GL650 Hub(0x0604),
Genesys Logic(0x05e3), rev 3.05
port 1 addr 4: full speed, power 90 mA, config 1, FT232R USB
UART(0x6001), FTDI(0x0403), rev 6.00, iSerialNumber A4001Tmz
port 2 addr 5: full speed, power 90 mA, config 1, FT232R USB
UART(0x6001), FTDI(0x0403), rev 6.00, iSerialNumber A4001Tr2
port 3 addr 6: full speed, power 90 mA, config 1, FT232R USB
UART(0x6001), FTDI(0x0403), rev 6.00, iSerialNumber A4001T4y
port 4 addr 7: full speed, power 90 mA, config 1, FT232R USB
UART(0x6001), FTDI(0x0403), rev 6.00, iSerialNumber A4001Tlt
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb4:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
$
8<-----------------------
After failure, usbdevs reads different!:
8<-----------------------
$ usbdevs -v
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 addr 2: high speed, power 500 mA, config 1, USB Storage(0x0727),
Generic(0x05e3), rev 2.06,
iSerialNumber 000000000206
port 7 powered
port 8 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 addr 2: low speed, power 100 mA, config 1, USB Keyboard(0x0408),
Chicony(0x04f2), rev 1.65
port 2 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 addr 2: full speed, self powered, config 1, HRS PRINTER(0x0013),
APS(0x1ad4), rev 1.00
port 2 addr 3: full speed, power 100 mA, config 1, GL650 Hub(0x0604),
Genesys Logic(0x05e3), rev
3.05
port 1 addr 4: full speed, power 90 mA, config 1, 8U232AM
Serial(0x6001), Future Technology
Devices(0x0403), rev 6.00
port 2 addr 5: full speed, power 90 mA, config 1, 8U232AM
Serial(0x6001), Future Technology
Devices(0x0403), rev 6.00
port 3 addr 6: full speed, power 90 mA, config 1, 8U232AM
Serial(0x6001), Future Technology
Devices(0x0403), rev 6.00
port 4 addr 7: full speed, power 90 mA, config 1, 8U232AM
Serial(0x6001), Future Technology
Devices(0x0403), rev 6.00
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb4:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
$
8<-----------------------
Then you dettach device, console shows:
8<-----------------------
uftdi_detach: sc=0xd1e78f00 flags=1
ucom0 detached
uftdi0 detached
uftdi_detach: sc=0xd1e78d80 flags=1
ucom1 detached
uftdi1 detached
uftdi_detach: sc=0xd1e78c00 flags=1
ucom2 detached
uftdi2 detached
uftdi_detach: sc=0xd1e78a80 flags=1
ucom3 detached
uftdi3 detached
uhub5 detached
8<-----------------------
Trying to reattach is to no avail; doesn't show anything on screen.
Some advice???
8<-----------------------
My /var/run/dmesg.boot
OpenBSD 4.9 (GENERIC) #1: Tue Jul 26 13:31:08 CEST 2011
r...@foo.electronicagracia.com:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Atom(TM) CPU D410 @ 1.66GHz ("GenuineIntel" 686-class)
1.67 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,SSSE3,CX16,xT
PR,PDCM,MOVBE
real mem = 1063481344 (1014MB)
avail mem = 1035948032 (987MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/27/10, BIOS32 rev. 0 @ 0xf0010,
SMBIOS
rev. 2.6 @ 0xf0720 (46 entries)
bios0: vendor American Megatrends Inc. version "0601" date 10/27/2010
bios0: ASUSTeK Computer INC. EB1007
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB HPET GSCI SLIC
acpi0: wakeup devices P0P1(S4) PS2K(S4) PS2M(S4) USB0(S4) USB2(S4)
EUSB(S4) P0P4
(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) USB1(S4) USB3(S4)
SLPB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 1, remapped to apid 2
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (P0P5)
acpiprt2 at acpi0: bus 2 (P0P6)
acpicpu0 at acpi0
aibs0 at acpi0: RTMP RVLT RFAN GGRP GITM SITM
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xda00! 0xce000/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x00
vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16 (irq 5)
drm0 at inteldrm0
"Intel Pineview Video" rev 0x00 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02:
apic 2 int
20 (irq 4)
azalia0: codecs: Realtek ALC662
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 2 int
16 (irq
5)
pci1 at ppb0 bus 4
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 2 int
17 (irq
11)
pci2 at ppb1 bus 3
jme0 at pci2 dev 0 function 0 "JMicron JMC250" rev 0x03: apic 2 int 17
(irq 11),
address f4:6d:04:04:34:af
jmphy0 at jme0 phy 1: JMP211 10/100/1000 PHY, rev. 1
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 2 int
18 (irq
10)
pci3 at ppb2 bus 2
athn0 at pci3 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 2 int 18
(irq 10)
athn0: AR9285 rev 2 (1T1R), ROM rev 13, address e0:b9:a5:00:f8:46
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int
23 (irq
14)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int
21 (irq
7)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int
18 (irq
10)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int
22 (irq
3)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int
23 (irq
14)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci4 at ppb3 bus 1
pcib0 at pci0 dev 31 function 0 "Intel Tigerpoint LPC" rev 0x02
ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x02: apic 2
int 19 (ir
q 15), AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD2500BEVT-8, 01.0> SCSI3
0/direct fixed
sd0: 238475MB, 512 bytes/sec, 488397168 sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 2
int 19
(irq 15)
iic0 at ichiic0
spdmem0 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
it0 at isa0 port 0x2e/2: IT8720F rev 8, EC port 0x290
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 6 configuration 1 interface 0 "Generic USB Storage"
rev 2.0
0/2.06 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <Generic, STORAGE DEVICE, 0206> SCSI0
0/direct rem
ovable
sd1: drive offline
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Chicony USB
Keyboard" rev 2
.00/1.65 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1 "Chicony USB
Keyboard" rev 2
.00/1.65 addr 2
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=2, output=0, feature=2
uhid2 at uhidev1 reportid 3: input=3, output=0, feature=0
ulpt0 at uhub2 port 1 configuration 1 interface 0 "APS HRS PRINTER" rev
1.10/1.0
0 addr 2
ulpt0: using bi-directional mode
uhub5 at uhub2 port 2 "Genesys Logic GL650 Hub" rev 1.10/3.05 addr 3
uftdi0 at uhub5 port 1 "FTDI FT232R USB UART" rev 2.00/6.00 addr 4
uftdi_attach: sc=0xd1e78f00
uftdi: in=0x81 out=0x2
ucom0 at uftdi0 portno 1
uftdi1 at uhub5 port 2 "FTDI FT232R USB UART" rev 2.00/6.00 addr 5
uftdi_attach: sc=0xd1e78d80
uftdi: in=0x81 out=0x2
ucom1 at uftdi1 portno 1
uftdi2 at uhub5 port 3 "FTDI FT232R USB UART" rev 2.00/6.00 addr 6
uftdi_attach: sc=0xd1e78c00
uftdi: in=0x81 out=0x2
ucom2 at uftdi2 portno 1
uftdi3 at uhub5 port 4 "FTDI FT232R USB UART" rev 2.00/6.00 addr 7
uftdi_attach: sc=0xd1e78a80
uftdi: in=0x81 out=0x2
ucom3 at uftdi3 portno 1
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
