It seems you've no drm ?
inteldrm0 at ...
Without drm, opengl will be painfully slow, you probably don't have
Xvideo also, try xvinfo (no nice playing in mplayer).
I'm no expert so I might be wrong.
On 2 August 2011 07:34, Tomas Bodzar <tomas.bod...@gmail.com> wrote:
> Hi all,
>
> here are some issues with current on new Dell E6320 (dmesg on the end
> of email including those weird characters is real including missing
> chars from starts). Can test some stuff or send more info in case of
> need.
>
> 1. Wifi
> firmware installed, but I can't see networks during scan and driver
> throws errors in dmesg
>
> Aug 2 12:19:22 /bsd: firmware error log:
> Aug 2 12:19:22 /bsd: error type = "UNKNOWN" (0x000013AA)
> Aug 2 12:19:22 /bsd: program counter = 0x00013FB0
> Aug 2 12:19:22 /bsd: source line = 0x000000E0
> Aug 2 12:19:22 /bsd: error data = 0x0000000000000000
> Aug 2 12:19:22 /bsd: branch link = 0x00013ED200013ED2
> Aug 2 12:19:22 /bsd: interrupt link = 0x0000D25200000000
> Aug 2 12:19:22 /bsd: time = 458
> Aug 2 12:19:22 /bsd: driver status:
> Aug 2 12:19:22 /bsd: tx ring 0: qid=0 cur=0 queued=0
> Aug 2 12:19:22 /bsd: tx ring 1: qid=1 cur=0 queued=0
> Aug 2 12:19:22 /bsd: tx ring 2: qid=2 cur=0 queued=0
> Aug 2 12:19:22 /bsd: tx ring 3: qid=3 cur=0 queued=0
> Aug 2 12:19:22 /bsd: tx ring 4: qid=4 cur=9 queued=0
> Aug 2 12:19:22 /bsd: tx ring 5: qid=5 cur=0 queued=0
> Aug 2 12:19:22 /bsd: tx ring 6: qid=6 cur=0 queued=0
> Aug 2 12:19:22 /bsd: tx ring 7: qid=7 cur=0 queued=0
> Aug 2 12:19:22 /bsd: tx ring 8: qid=8 cur=0 queued=0
> Aug 2 12:19:22 /bsd: tx ring 9: qid=9 cur=0 queued=0
> Aug 2 12:19:22 /bsd: tx ring 10: qid=10 cur=0 queued=0
> Aug 2 12:19:22 /bsd: tx ring 11: qid=11 cur=0 queued=0
> Aug 2 12:19:22 /bsd: tx ring 12: qid=12 cur=0 queued=0
> Aug 2 12:19:22 /bsd: tx ring 13: qid=13 cur=0 queued=0
> Aug 2 12:19:22 /bsd: tx ring 14: qid=14 cur=0 queued=0
> Aug 2 12:19:22 /bsd: tx ring 15: qid=15 cur=0 queued=0
> Aug 2 12:19:22 /bsd: tx ring 16: qid=16 cur=0 queued=0
> Aug 2 12:19:22 /bsd: tx ring 17: qid=17 cur=0 queued=0
> Aug 2 12:19:22 /bsd: tx ring 18: qid=18 cur=0 queued=0
> Aug 2 12:19:22 /bsd: tx ring 19: qid=19 cur=0 queued=0
> Aug 2 12:19:22 /bsd: rx ring: cur=10
> Aug 2 12:19:22 /bsd: 802.11 state 0
> Aug 2 12:19:23 /bsd: iwn0: RXON command failed
> Aug 2 12:19:23 /bsd: iwn0: could not configure device
>
> $ sudo ifconfig iwn0 up
> $ sudo ifconfig iwn0 scan
> iwn0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
> lladdr a0:88:b4:72:f0:70
> priority: 4
> groups: wlan
> media: IEEE802.11 autoselect
> status: no network
> ieee80211: nwid ""
> $
>
> $ sudo ifconfig iw$ pkg_info | grep -i iwn
> iwn-firmware-5.6 Firmware binary images for iwn driver
> $
>
> 2. VGA
>
> Probably just too much new HW. Resolution is fine, but "speed" of
> screen is quite slow, but usable.
>
> $ glxgears
> 38 frames in 5.1 seconds = 7.415 FPS
> 37 frames in 5.0 seconds = 7.353 FPS
> 35 frames in 5.0 seconds = 6.994 FPS
> ^C
> $ glxinfo | grep -i render
> direct rendering: Yes
> OpenGL renderer string: Software Rasterizer
> GL_NV_conditional_render, GL_NV_depth_clamp, GL_NV_fragment_program,
> $
>
> $ sudo pcidump -v 0:2:0
> 0:2:0: Intel GT2+ Video
> 0x0000: Vendor ID: 8086 Product ID: 0126
> 0x0004: Command: 0007 Status ID: 0090
> 0x0008: Class: 03 Subclass: 00 Interface: 00 Revision: 09
> 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size:
00
> 0x0010: BAR mem 64bit addr: 0x00000000e1400000/0x00400000
> 0x0018: BAR mem prefetchable 64bit addr:
0x00000000d0000000/0x10000000
> 0x0020: BAR io addr: 0x00004000/0x0040
> 0x0024: BAR empty (00000000)
> 0x0028: Cardbus CIS: 00000000
> 0x002c: Subsystem Vendor ID: 1028 Product ID: 0492
> 0x0030: Expansion ROM Base Address: 00000000
> 0x0038: 00000000
> 0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00
> 0x0090: Capability 0x05: Message Signaled Interrupts (MSI)
> 0x00d0: Capability 0x01: Power Management
> 0x00a4: Capability 0x13: PCI Advanced Features
> $
>
>
> ERIC.MP) #29: Sat Jul 30 17:06:22 MDT 2011
> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
> RTC BIOS diagnostic error
> 3f<config_unit,memory_size,fixed_di\^A,invalptal\M-h\M^@
> cpu0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz ("GenuineIntel"
> 686-class) 2.50 GHz
> cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
T,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,AES,XSAVE
> ,AVX
> real mem = 3394228224 (3236MB)
> avail mem = 3328643072 (3174MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 04/07/11, BIOS32 rev. 0 @
> 0xffa10, SMBIOS rev. 2.6 @ 0xf1ef0 (106 entries)
> bios0: vendor Dell Inc. version "A05" date 05/24/2011
> bios0: Dell Inc. Latitude E6320
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP APIC TCPA MCFG HPET BOOT SSDT SSDT DMAR SLIC
> acpi0: wakeup devices UAR1(S3) HDEF(S4) GLAN(S4) PXSX(S4) RP01(S4)
> PXSX(S4) RP02(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PXSX(S4)
> RP06(S4) PXSX(S4) RP07(S4) PXSX(S4) RP08(S4) PEG0(S4) PEGP(S4)
> PEG1(S4) PEG2(S4) PEG3(S4) PXSX
> (S4) RP03(S4) EHC2(S3) EHCI(S3) LID_(S3) PBTN(S3)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 99MHz
> cpu1 at mainbus0: apid 2 (application processor)
> cpu1: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz ("GenuineIntel"
> 686-class) 2.50 GHz
> cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
T,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,AES,XSAVE
> ,AVX
> cpu2 at mainbus0: apid 1 (application processor)
> cpu2: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz ("GenuineIntel"
> 686-class) 2.50 GHz
> cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
T,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,AES,XSAVE
> ,AVX
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz ("GenuineIntel"
> 686-class) 2.50 GHz
> cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
T,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,AES,XSAVE
> ,AVX
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
> acpihpet0 at acpi0: 14318179 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (P0P1)
> acpiprt2 at acpi0: bus 1 (RP01)
> acpiprt3 at acpi0: bus 2 (RP02)
> acpiprt4 at acpi0: bus 9 (RP04)
> acpiprt5 at acpi0: bus -1 (RP05)
> acpiprt6 at acpi0: bus 10 (RP06)
> acpiprt7 at acpi0: bus -1 (RP07)
> acpiprt8 at acpi0: bus -1 (RP08)
> acpiprt9 at acpi0: bus -1 (PEG0)
> acpiprt10 at acpi0: bus -1 (PEG1)
> acpiprt11 at acpi0: bus -1 (PEG2)
> acpiprt12 at acpi0: bus -1 (PEG3)
> acpiprt13 at acpi0: bus 3 (RP03)
> acpiec0 at acpi0
> acpicpu0 at acpi0: C3, C2, C1, PSS
> acpicpu1 at acpi0: C3, C2, C1, PSS
> acpicpu2 at acpi0: C3, C2, C1, PSS
> acpicpu3 at acpi0: C3, C2, C1, PSS
> acpitz0 at acpi0: critical temperature is 107 degC
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: PBTN
> acpibtn2 at acpi0: SBTN
> acpiac0 at acpi0: AC unit online
> acpibat0 at acpi0: BAT0 model "DELL YJNKK16" serial 3769 type LION oem
> "Samsung SDI"
> acpibat1 at acpi0: BAT1 not present
> acpibat2 at acpi0: BAT2 not present
> acpivideo0 at acpi0: VID_
> acpivout0 at acpivideo0: LCD_
> bios0: ROM list: 0xc0000/0xee00
> cpu0: Enhanced SpeedStep 2495 MHz: speeds: 2501, 2500, 2000, 1800,
> 1600, 1400, 1200, 1000, 800 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
> vga1 at pci0 dev 2 function 0 "Intel GT2+ Video" rev 0x09
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> intagp at vga1 not configured
> "Intel 6 Series MEI" rev 0x04 at pci0 dev 22
> functionphd0P\^F\^H@W\M-I\M-@\M^V\M-J
> \^T\M^X@\M^[\M-J\^X\M-|\M-9\M-G\M-8\M^O\M^Z\M-J8A\M^[\M-JptalPfigured
> em0 at pci0 dev 25 function 0 "Intel 825phd0P\^F\^H@W\M-I\M-8\M-E\M^V\M-J
> ehci0 at pci0 dev 26 funcptalPIntel 6 Series USB" rev 0x04: apic 2 int 16
>
usb0phd0P\^F\^H@W\M-I\M-`\M^V\M-J`?\^Xb\M^[\M-J\M^XB\M-:\M-G8@\M^[\M-J\M-8A\M
^[\M-JptalPdr
> 1
> azalia0 at pci0 dev 27 function 0 "Intel 6 phd0P\^F\^H@W\M-I
>
\M^W\M-J\240\^T\^XB\M^[\M-J\M^X\^[\M-<\M-G8A\M^[\M-J\M-8B\M^[\M-JptalPIDT/0x7
6e7
> audio0 at azalia0
> ppb0 at pci0 dev 28phd0 \^F\^H@W\M-Iptal " rev 0xb4: apic 2 int 16
> pci1 at ppb0 bus 1
> ppb1 at pci0 dev 28 function 1 "Intel 6 Series
> PCIEphd0P\^F\^H@W\M-I@\M^W\M-J
> \^XC\M^[\M-J\M^X\M^U\M-<\M-G\M-8A\M^[\M-J\M-8C\M^[\M-JptalPl Centrino
> Advanced-N 6005" rev 0x34: msi, MIMO phd0 \^F\^H@W\M-Iptal 0:70
> ppb2 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb4: apic 2 int
18
> pci3 at ppb2 bphd0P\^F\^H@W\M-IP\M^W\M-J
> \^XD\M^[\M-J\M^X\M^[\M-<\M-G\M-8B\M^[\M-J\M-8D\M^[\M-JptalP9
> pci4 at ppb3 bus 9
> ppb4 at pci0 dev 28 functiophd0 \^F\^H@W\M-Iptal b4: apic 2 int 17
> pci5 at ppb4 bus 10
> sdhc0 at pci5 dev 0 function 0 vendor "O2 Micro", unknown
> phd0P\^F\^H@W\M-I`\M^W\M-J\M^@
> \^XE\M^[\M-J\M^X\^Z\M-?\M-G\M-8C\M^[\M-J\M-8E\M^[\M-JptalPtion 0
> "Intel 6 Series USB" rev 0x04: apic 2
> intphd0`\^F\^H@W\M-Ic\M^W\M-JLc\M^W\M-J\^Pc\M^W\M-J1 "Intel EHCI root
> hub" rev 2.00/1.00 adptal`b0 at pci0 dev 31 functio
> n 0
"Inphd0P\^F\^H@W\M-Ip\M^W\M-J@\^O\^XF\M^[\M-J\M^X&\M-F\M-G\M-8D\M^[\M-J\M-8F\
M^[\M-JptalP
> 0x04: msi, AHCI 1.3
> scsibus0 at ahci0: 32 targephd0 \^F\^H@W\M-Iptal <ATA,
> ST250LT007-9ZV14, 0001> SCSI3 0/direct fixed naa.5000c5002f67c236
> sd0: 238475MB, 512
>
bytephd0P\^F\^H@W\M-I\M^@\M^W\M-JR\M^X\M--\M^Z\M-J\M^X\M^U\M-H\M-G\M-8E\M^[\M
-J8G\M^[\M-JptalPU633J,
> D400> ATAPI 5/cdrom removable
> ichiic0 at
phd0P\^F\^H@W\M-I\M-`\M^W\M-J\M^@\^[\M^XG\M^[\M-J\^X\M-T\M-H\M-G\M-8F\M^[\M-J
8H\M^[\M-JptalPhiic0
> iic0: addr 0x18 00=00 01=00 02=00 03=00 04phd0 \^F\^H@W\M-Iptal 0
> 0a=00 0b=00 words 00=006f 01=0000 02=0000 03=0000 04=0000 05=c27c
> 06=104a 07=0300
> iic0: addr
0phd0P\^F\^H@W\M-I\M^X\M-J@\^H\M^XH\M^[\M-J\M^X]\M-M\M-G8G\M^[\M-J8I\M^[\M-Jp
talPs
> 00=006f 01=0000 02=0000 03=0000 04=0000
> 05=c26phd0P\^F\^H@W\M-I\M-`\^F\M^X\M-Jaddr 0x1d: lis331dl
> spdmem0 at iic0 addrptalPGB DDR3 SDRAM PC3-10600 SO-DIMM with thermal
>
senphd0P\^F\^H@W\M-I\^P\M^X\M-J\M-@\^V\M^XI\M^[\M-J\^X\M-z\M-P\M-G8H\M^[\M-J8
J\M^[\M-JptalPsor
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 pphd0 \^F\^H@W\M-Iptal byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd
>
slophd0P\^F\^H@W\M-I0\M^X\M-J\240\^T\M^XJ\M^[\M-J\^X\M-m\M-Z\M-G8I\M^[\M-J8K\
M^[\M-JptalP
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pphd0P\^F\^H@W\M-I89\M^X\M-J61
> spkr0 at pcppi0
> lpt0 at isa0 port 0x3ptalP 7
> npx0 at isa0 port 0xf0/16: reported by
>
CPUID;phd0P\^F\^H@W\M-IP\M^X\M-J`\^K\M^XK\M^[\M-J\^X?\M-o\M-G8J\M^[\M-J8M\M^[
\M-JptalPproduct
> 0x0024" rev 2.00/0.00 addr 2
> uhub3 at uhphd0 \^F\^H@W\M-Iptal rev 2.00/a0.05 addr 3
> uhidev0 at uhub3 port 1 configuration 1 interface 0 "DELL DELL USB
> Laser
phd0`\^F\^H@W\M-ISGPO\M^X\M-Q\M-o\M-G\M^?ass\M-U\M-aky\^D\M-W\M-o\M^?\M-?dev0
d\^S\M^J\M-J\M-d\^U\M^J\M-J|\^T\M^J\M-Jptal`ms0
> mux 0
> uhidev1 at uhub3 port phd0@\^F\^H@W\M-IIERS0
> "D\^X\M-[\M-o\M-Gtd\M^X\M-J\M-@\M-Q\M-~ptal@ard" rev 2.00/1.00 addr 5
> uhidev1: iclass 3/1
> ukbd0 at uhidev1:
>
phd0P\^F\^H@W\M-I`\M^X\M-J\^L\M^XM\M^[\M-J\^X\M-]\M-o\M-G8K\M^[\M-J8N\M^[\M-J
ptalPay0
> ugen0 at uhub3 port 3 configuration 1 "Dell
> phd0P\^F\^H@W\M-I\M-8e\M^X\M-J rev 2.00/1.00 addr 5
> uhub4 at uhub2 porptalPl product 0x2513" rev 2.00/a0.05 addr 6
> ugen1
atphd0P\^F\^H@W\M-Ip\M^X\M-J`,\M^XN\M^[\M-J\M^X\^^\M-p\M-G8M\M^[\M-J8O\M^[\M-
JptalPvideo0
> at uhub2 port 5 configuration 1
> interfacephd0P\^F\^H@W\M-I\240\M^Q\M^X\M-Jtop_Integrated_Webcam_HD"
> rev 2.00/c.17 ptalPideo0 at
> uvideo0
> uhub5 at uhub1 port 1 "Intel
>
prphd0P\^F\^H@W\M-I\240\M^X\M-J`%\^Xm\M^[\M-J\^Xy\M-p\M-G8N\M^[\M-J`\M->\M^X\
M-JptalPv
> 1.10/1.01 addr 3
> vscsi0 at root
> scsibus1 at vsphd0H\^F\^H@W\M-IAmerican MegatrendsptalHoot on sd0a
> (83fa842d2ab35319.a) swap on sd0b dump on sdpfr0\^C8@W\M-I\^HR\M^[\M-J
> rebooting...
> OpenBSD 5.0-beta (GENERIC.MP) #29: Sat Jul 30 17:06:22 MDT 2011
> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
> RTC BIOS diagnostic error
3f<config_unit,memory_size,fixed_disk,invalid_time>
> cpu0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz ("GenuineIntel"
> 686-class) 2.50 GHz
> cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
T,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,AES,XSAVE
> ,AVX
> real mem = 3394228224 (3236MB)
> avail mem = 3328643072 (3174MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 04/07/11, BIOS32 rev. 0 @
> 0xffa10, SMBIOS rev. 2.6 @ 0xf1ef0 (106 entries)
> bios0: vendor Dell Inc. version "A05" date 05/24/2011
> bios0: Dell Inc. Latitude E6320
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP APIC TCPA MCFG HPET BOOT SSDT SSDT DMAR SLIC
> acpi0: wakeup devices UAR1(S3) HDEF(S4) GLAN(S4) PXSX(S4) RP01(S4)
> PXSX(S4) RP02(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PXSX(S4)
> RP06(S4) PXSX(S4) RP07(S4) PXSX(S4) RP08(S4) PEG0(S4) PEGP(S4)
> PEG1(S4) PEG2(S4) PEG3(S4) PXSX
> (S4) RP03(S4) EHC2(S3) EHCI(S3) LID_(S3) PBTN(S3)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 99MHz
> cpu1 at mainbus0: apid 2 (application processor)
> cpu1: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz ("GenuineIntel"
> 686-class) 2.50 GHz
> cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
T,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,AES,XSAVE
> ,AVX
> cpu2 at mainbus0: apid 1 (application processor)
> cpu2: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz ("GenuineIntel"
> 686-class) 2.50 GHz
> cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
T,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,AES,XSAVE
> ,AVX
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz ("GenuineIntel"
> 686-class) 2.50 GHz
> cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
T,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,AES,XSAVE
> ,AVX
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
> acpihpet0 at acpi0: 14318179 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (P0P1)
> acpiprt2 at acpi0: bus 1 (RP01)
> acpiprt3 at acpi0: bus 2 (RP02)
> acpiprt4 at acpi0: bus 9 (RP04)
> acpiprt5 at acpi0: bus -1 (RP05)
> acpiprt6 at acpi0: bus 10 (RP06)
> acpiprt7 at acpi0: bus -1 (RP07)
> acpiprt8 at acpi0: bus -1 (RP08)
> acpiprt9 at acpi0: bus -1 (PEG0)
> acpiprt10 at acpi0: bus -1 (PEG1)
> acpiprt11 at acpi0: bus -1 (PEG2)
> acpiprt12 at acpi0: bus -1 (PEG3)
> acpiprt13 at acpi0: bus 3 (RP03)
> acpiec0 at acpi0
> acpicpu0 at acpi0: C3, C2, C1, PSS
> acpicpu1 at acpi0: C3, C2, C1, PSS
> acpicpu2 at acpi0: C3, C2, C1, PSS
> acpicpu3 at acpi0: C3, C2, C1, PSS
> acpitz0 at acpi0: critical temperature is 107 degC
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: PBTN
> acpibtn2 at acpi0: SBTN
> acpiac0 at acpi0: AC unit online
> acpibat0 at acpi0: BAT0 model "DELL YJNKK16" serial number itype LION
> oem "Samsung SDI"
> acpibat1 at acpi0: BAT1 not present
> acpibat2 at acpi0: BAT2 not present
> acpivideo0 at acpi0: VID_
> acpivout0 at acpivideo0: LCD_
> bios0: ROM list: 0xc0000/0xee00
> cpu0: Enhanced SpeedStep 2495 MHz: speeds: 2501, 2500, 2000, 1800,
> 1600, 1400, 1200, 1000, 800 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
> vga1 at pci0 dev 2 function 0 "Intel GT2+ Video" rev 0x09
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> intagp at vga1 not configured
> "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> "Intel 6 Series KT" rev 0x04 at pci0 dev 22 function 3 not configured
> em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
> ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int
16
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi
> azalia0: codecs: IDT/0x76e7, Intel/0x2805, using IDT/0x76e7
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: apic 2 int
16
> pci1 at ppb0 bus 1
> ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: apic 2 int
17
> pci2 at ppb1 bus 2
> iwn0 at pci2 dev 0 function 0 "Intel Centrino Advanced-N 6005" rev
> 0x34: msi, MIMO 2T2R, MoW, address
> ppb2 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb4: apic 2 int
18
> pci3 at ppb2 bus 3
> ppb3 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb4: apic 2 int
19
> pci4 at ppb3 bus 9
> ppb4 at pci0 dev 28 function 5 "Intel 6 Series PCIE" rev 0xb4: apic 2 int
17
> pci5 at ppb4 bus 10
> sdhc0 at pci5 dev 0 function 0 vendor "O2 Micro", unknown product
> 0x8221 rev 0x05: apic 2 int 17
> sdmmc0 at sdhc0
> ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int
17
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> pcib0 at pci0 dev 31 function 0 "Intel QM67 LPC" rev 0x04
> ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi, AHCI
1.3
> scsibus0 at ahci0: 32 targets
> sd0 at scsibus0 targ 0 lun 0: <ATA, ST250LT007-9ZV14, 0001> SCSI3
> 0/direct fixed naa.5000c5002f67c236
> sd0: 238475MB, 512 bytes/sector, 488397168 sectors
> cd0 at scsibus0 targ 1 lun 0: <TSSTcorp, DVD+-RW TS-U633J, D400> ATAPI
> 5/cdrom removable
> ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2
int 18
> iic0 at ichiic0
> iic0: addr 0x18 00=00 01=00 02=00 03=00 04=00 05=c2 06=10 07=03 08=01
> 09=00 0a=00 0b=00 words 00=006f 01=0000 02=0000 03=0000 04=0000
> 05=c2a0 06=104a 07=0300
> iic0: addr 0x1a 00=00 01=00 02=00 03=00 04=00 05=c2 06=10 07=03 08=01
> 09=00 0a=00 0b=00 words 00=006f 01=0000 02=0000 03=0000 04=0000
> 05=c27c 06=104a 07=0300
> lisa0 at iic0 addr 0x1d: lis331dl
> spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM with thermal
sensor
> spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-10600 SO-DIMM with thermal
sensor
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> mtrr: Pentium Pro MTRR support
> uhub2 at uhub0 port 1 "Intel product 0x0024" rev 2.00/0.00 addr 2
> uhub3 at uhub2 port 1 "Dell product 0x2513" rev 2.00/a0.05 addr 3
> uhidev0 at uhub3 port 1 configuration 1 interface 0 "DELL DELL USB
> Laser Mouse" rev 2.00/57.00 addr 4
> uhidev0: iclass 3/1
> ums0 at uhidev0: 8 buttons, Z dir
> wsmouse1 at ums0 mux 0
> uhidev1 at uhub3 port 3 configuration 1 interface 0 "Dell Dell Smart
> Card Reader Keyboard" rev 2.00/1.00 addr 5
> uhidev1: iclass 3/1
> ukbd0 at uhidev1: 8 modifier keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> ugen0 at uhub3 port 3 configuration 1 "Dell Dell Smart Card Reader
> Keyboard" rev 2.00/1.00 addr 5
> uhub4 at uhub2 port 2 "Dell product 0x2513" rev 2.00/a0.05 addr 6
> ugen1 at uhub2 port 4 "Dell Computer Corp DW375 Bluetooth Module" rev
> 2.00/5.17 addr 7
> uvideo0 at uhub2 port 5 configuration 1 interface 0
> "001E9073559E-B416-15151F Laptop_Integrated_Webcam_HD" rev 2.00/c.17
> addr 8
> video0 at uvideo0
> uhub5 at uhub1 port 1 "Intel product 0x0024" rev 2.00/0.00 addr 2
> ugen2 at uhub5 port 8 "Broadcom Corp 5880" rev 1.10/1.01 addr 3
> vscsi0 at root
> scsibus1 at vscsi0: 256 targets
> softraid0 at root
> scsibus2 at softraid0: 256 targets
> root on sd0a (83fa842d2ab35319.a) swap on sd0b dump on sd0b
> $
