Hello all,
Thank you for hint, amd64 architecture does work on our HW !
Everything was instaled fine (I instaled latest snapshot). But we have
another problem.
When I look into BIOS, there is no possibility to do good irq routing.
BIOS groups almost all devices to irq3 :( I can change irq, but I cannot
change number of devices on this interrupt. There is IRQ for both
internal ethernet broadcom cards, IRQ for PCIx slot, HDD, ... and more.
I think this is very bad. I do not know if it is due to this simple irq
but we have this problems:
- disk operations are VERY slow (does not matter, no problem for us, it
is firewall).
- entire traffic is going thru cpu0. Cpu1 is unused. I think that if two
cards are on another irq, it could be possible
- througnput of entire system with large packets is somewhere at
120mbps. After it, CPU0 spend all time in interrupts.
- I think this machine should be firewalling at much more speed.
Please can you help me ? Is there any chance how to change irq if BIOS
routes it bad? Or is there another way how to use both CPUs for
firewalling?
Thank you very much !
Here is dmesg:
OpenBSD 3.8-current (GENERIC.MP) #556: Sat Oct 15 14:22:53 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 1073319936 (1048164K)
avail mem = 908791808 (887492K)
using 22937 buffers containing 107540480 bytes (105020K) of memory
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (IBM ENSW X336 SMP )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(TM) CPU 3.20GHz, 3200.57 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,NXE,LONG
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: apic clock running at 200007107Hz
cpu1 at mainbus0: apid 6 (application processor)
cpu1: Intel(R) Xeon(TM) CPU 3.20GHz, 3200.12 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,NXE,LONG
cpu1: 2MB 64b/line 8-way L2 cache
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 4 is type PCI
mpbios: bus 5 is type PCI
mpbios: bus 6 is type PCI
mpbios: bus 7 is type PCI
mpbios: bus 8 is type ISA
ioapic0 at mainbus0 apid 14: pa 0xffff800001ba7f24, version 20, 24 pins
ioapic1 at mainbus0 apid 13: pa 0xffff800001ba7e24, version 20, 24 pins
ioapic2 at mainbus0 apid 12: pa 0xffff800001ba7d24, version 20, 24 pins
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel E7710 SMCH" rev 0x0c
"Intel E7710 MCH ERR" rev 0x0c at pci0 dev 0 function 1 not configured
ppb0 at pci0 dev 2 function 0 "Intel E7710 MCH PCIE" rev 0x0c
pci1 at ppb0 bus 2
ppb1 at pci0 dev 4 function 0 "Intel E7710 MCH PCIE" rev 0x0c
pci2 at ppb1 bus 3
ppb2 at pci2 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 4
mpt0 at pci3 dev 1 function 0 "Symbios Logic 53c1030" rev 0x08: apic 13
int 4 (irq 10)
mpt0: sending FW Upload request to IOC (size: 36, img size: 69956)
mpt0: IM support: 4
scsibus0 at mpt0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <LSILOGIC, 1030 IM IM, 1000> SCSI2
0/direct fixed
sd0: 139898MB, 139898 cyl, 16 head, 128 sec, 512 bytes/sec, 286511104
sec total
mpt0: target 0 Asynchronous at 0MHz width 8bit offset 0 QAS 0 DT 0 IU 0
ppb3 at pci2 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci4 at ppb3 bus 5
em0 at pci4 dev 1 function 0 "Intel PRO/1000MT (82545GM)" rev 0x04: apic
12 int 0 (irq 10), address 00:0e:0c:9c:07:13
ppb4 at pci0 dev 6 function 0 "Intel E7710 MCH PCIE" rev 0x0c
pci5 at ppb4 bus 6
bge0 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1
(0x4101): apic 14 int 16 (irq 10) address 00:14:5e:0b:3e:ea
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb5 at pci0 dev 7 function 0 "Intel E7710 MCH PCIE" rev 0x0c
pci6 at ppb5 bus 7
bge1 at pci6 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1
(0x4101): apic 14 int 16 (irq 10) address 00:14:5e:0b:3e:eb
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
vendor "Intel", unknown product 0x359b (class system subclass
miscellaneous, rev 0x0c) at pci0 dev 8 function 0 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 14
int 16 (irq 10)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 14
int 19 (irq 7)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB" rev 0x02: apic 14
int 23 (irq 5)
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
ppb6 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci7 at ppb6 bus 1
vga1 at pci7 dev 1 function 0 "ATI Radeon VE QY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8083N, 0L02> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
"Intel 82801EB/ER SMBus" rev 0x02 at pci0 dev 31 function 3 not
configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sysbeep0 at pcppi0
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
On Ne, 2005-10-16 at 19:21 +0200, Reyk Floeter wrote:
> hi,
>
> On Sun, Oct 16, 2005 at 10:15:24AM +0200, Luka? Macura wrote:
> > We just bought new HW for our firewall. It should operate at high speeds
> > (up to 1Gbps) so we need strong hardware. We got one but we are not
> > possible to instal due to some problems in irq routing process. Scenario
> > is same with 3.7 and 3.8 kernel. Server hangs just after last line in
> > this screenshot:
> > http://uit.opf.slu.cz/Members/macura/Screenshot1.png
> > Last text line is:
> > pcibios0: PCI Interrupt Router at 0000:31:0 ("Intel 82801EB/ER LPC" rev
> > 0x00)
> >
>
> i'm curious, could you submit as a bug report again (man sendbug(1))?
> so we could pick it up and handle it internally. i'll get my hands on
> an 346, which is probably similar.
>
> your machine should support the EM64T extension, did you try to boot
> the amd64 port?
>
> reyk
[demime 1.01d removed an attachment of type application/x-pkcs7-signature which
had a name of smime.p7s]
