On Wed, Oct 05, 2011 at 07:38:30PM -0400, Josh Grosse wrote: > On Wed, Oct 05, 2011 at 11:56:48AM -0400, Jim Rosenberg wrote: > > I have a new Compaq 100B on which I've installed 4.9 amd64 (dmesg below). > > Everything seems to work fine except the network. The network is giving > > me results so strange I'm struggling to understand what could be going > > wrong, even given that Realtek 8101E does not show on the list of supported > > hardware. > > Here's the problem: > > > re0 at pci2 dev 0 function 0 "Realtek 8101E" rev 0x05: unknown ASIC > > (0x4080), apic 0 int 16 (irq 7), address 2c:27:d7:32:1c:27 > > ukphy0 at re0 phy 7: Generic IEEE 802.3u media interface, rev. 2: OUI > > 0x000732, model 0x0008 > > Your NIC controller is recognized, but the ASIC that manages the Ethernet > connection is not. The PHY driver that was attached was ukphy(4), for generic > and unknown PHY devices.
Right, 0x4080 is 8105E so you'll want to run a snapshot and tell us how/if it goes. And then we may have to make some minor changes to rgephy(4) to add another internal Realtek PHY and get everything working.
