Thanks! and Yeah! On Tue, Nov 1, 2011 at 10:38 PM, Theo de Raadt <dera...@cvs.openbsd.org>wrote:
> ------------------------------------------------------------------------ > Nov 1, 2011. > > We are pleased to announce the official release of OpenBSD 5.0. > This is our 30th release on CD-ROM (and 31th via FTP). We remain > proud of OpenBSD's record of more than ten years with only two remote > holes in the default install. > > As in our previous releases, 5.0 provides significant improvements, > including new features, in nearly all areas of the system: > > - Improved hardware support, including: > o MSI interrupts for many devices, on those architectures which can > support them (amd64, i386, sparc64 only so far). > o A new dma_alloc(9) API makes it easier for kernel code to allocate > dma-safe memory. Many drivers (especially network drivers) and > subsystems (in particular scsi and the buffer cache) were adapted > to use this. > o As a result, big-memory support has been enabled on all possible > architectures. > o The rather rare bce(4) driver now copies mbufs all the time, to cope > with the hardware having a 1GB limit. > o Added hds(4), a driver for Hitachi Modular Storage SCSI devices. > o Added myx(4), a driver for the Myricom Myri-10G 10GB Ethernet devices. > o Added dfs(4), a driver for Dynamic Frequency Switching on some macppc > systems. > o cardbus(4) and pcmcia(4) support on sgi. > o Suspend/resume support on Loongson Yeelong laptops. > o Interrupt handlers for bnx(4), em(4), ix(4) and sis(4) have been > improved reducing overhead and increasing performance. > o New acpitoshiba(4) driver providing ACPI support for Toshiba laptops. > o Added nvt(4), a driver for the W83795G and W83795ADG hardware monitor. > o Added support to sdhc(4) for the Ricoh 5U823 SD/MMC controller. > o A new fw_update(1) tool to install and update non-free firmware > packages. > > - Generic network stack improvements: > o Added support for sending Wake on LAN packets using arp(8). > o Permit turning Wake on LAN support on/off using ifconfig(8). > o Added Wake on LAN support to xl(4), re(4), and vr(4). > o Allow ftp-proxy to proxy across rdomains. > o The IPv4 stack will no longer accept ICMP redirects when > acting as a router. > o By default the IPv6 stack will not process ICMP6 redirects. > rtsol(8) will turn it back if -F is used. > o Reworked large parts of the dhclient(8) options processing for better > interoperability. > o Fixed carp(4) to work in IPv6 only setups. > o Make it possible to bind(2) to the local network broadcast address > on datagram and raw sockets. > o The default multicast reject route is now ignored if the UDP socket > uses the IP_MULTICAST_IF socket option. > o Make gre(4) work between systems in the same LAN. > o Removed the link1 mode special addressing mode on lo(4). > o New net.inet.tcp.always_keepalive sysctl, effectively enabling > SO_KEEPALIVE on all TCP sockets. > > - Routing daemons and other userland network improvements: > o bgpd(8) no longer bumps the rlimits: the rc.d framework respects > login classes which is a much better solution. > o Correctly set the network filtersets on reload in bgpd(8). > o The routing socket is now sending RTM_DESYNC messages if the > socketbuffer overflows. > o Allow ospfd(8) to send out LS updates and other messages > larger than the MTU. > o Fixed nexthop calculation in ospfd(8) for directly connected P2P > links. > o First bits to support opaque LSA in ospfd(8). Only basic redistribute > logic and LSDB handling for now. > o Creating new interfaces will no longer cause a fatal error in > ospf6d(8). > o ospf6d(8) handles link-state changes better. > o Better loopback handling in ospf6d(8). > o No longer install extra multicast routes in ripd(8) and ldpd(8). > o Make kqueue(2) work with sosplice(9). > o Enabled sosplice(9) in relayd(8) for TCP. > o Added support for divert-to which provides some benefits over > rdr-to in relayd(8). > o Reload support in relayd(8) has been fixed. > o Fixed trap sending in snmpd(8). > o Make ping6(8) compare minimum amount of bytes between what > was received and what was sent out. > o Make traceroute(8) with type-of-service setted (-t) display > a message if the returned packet has a different tos type. > o Added the socket splicing fields of struct socket to netstat -vP > output. > o tcpbench(1) now uses libevent and supports both TCP and UDP modes. > o TCP socket buffer sizes can now be displayed using the netstat(1) -B > flag. > o tcpdump(8) can now filter on icmptype and tcpflags. > o bgplg(8) now supports "show ip bgp peer-as". > > - pf(4) improvements: > o Make pf(4) reassemble IPv6 fragments. In the forward case, pf > refragments the packets with the same maximum size. > o Allow pf(4) to filter on the rdomain a packet belongs to. > o Make pf(4) allow userland proxies to establish cross rdomain > proxy sessions. > o Added IPv6 ACK prioritization in pf(4). > o Change 'set skip on <...>' to work with interface groups. > o pfsync(4) supports IPv6 as network protocol. > o Switched ftp-proxy(8) over to divert-to instead of rdr-to. > o Switched tftp-proxy(8) over to divert-to instead of rdr-to. > o New very low overhead priority queueing implementation for pf(4) used > via > the "prio" keyword. > o Support for least-states in load balancing pools and tables. > o Support for weighted round-robin in load balancing pools and tables. > > - SCSI improvements: > o Most SCSI hardware drivers now use the new iopools infrastructure. > o scsi(4) devices are now all provided with a unique devid, which > is displayed during the probe process. > o ASC/ASCQ error codes and verbiage now in sync with > http://www.t10.org/lists/asc-num.txt. > o Progress on iSCSI includes better login, better logout, preliminary > FSM support in iscsid(8), and improved logging and debug information. > o uk(4) can now safely and reliably detach an unknown SCSI device. > o SCSI multipath device and kernel support has been improved. > o vscsi(4) now ensures output always goes to the correct connection. > o vscsi(4) connections can now be reset gracefully. > o scsi(4) devices on fibre channel fabrics no longer inherit the > adapter's > address. > > - Assorted improvements: > o Kernel randomization speed and quality improved substantially. > o For additional security, security(8) was rewritten in Perl. > o Mandoc 1.11.4: Now accepts eqn(7) input (no fancy formatting yet) > and supports -Tutf8 output (but no utf8 input yet). > o Removed a variety of OS-compat emulation code, leaving just the Linux > support. > o Small improvements to Linux compat (only available on i386). > o Improved our own pkg-config(1) implementation with extended comparison > scheme and implementing various new options. > o The math library, libm, was fully fleshed out to support all C99 > required > parts. Many bugs for various architectures were fixed along the way. > o malloc(3) is a lot faster and has a few further security features > (more > randomization, as well as the 'S' flag to enable all paranoia checks). > o 'make depend' is no longer neccessary in kernel compilation > directories > since the dependencies are calculated automatically. > o Increased the default size of the buffer cache. > o kqueue(2) now works on /dev/random and spliced sockets > o On MBR-based disks, scan through up to 256 extended partition tables > when looking for an OpenBSD partition table. > o Added POSIX 2008 fdopendir(3) and openat(2) functions, as well as the > O_CLOEXEC, O_DIRECTORY, and F_DUPFD_CLOEXEC flags. > o Improved lint format string checks and added a few other checks. > o kdump(8) now dumps stat and sockaddr structures, sysctl mib > strings, and decodes syscall flags and operation bits. > o Improved kernel pool debug checking. > o Improved correctness of signals and various syscalls when rthreads > are in use. > o Kernel malloc(9) space and stacks moved to non-dma memory. > o Fixed some shutdown/reboot hangs on NFS clients. > o UNIX-domain socket paths are now guaranteed to be NUL-terminated. > o Added support for *wprintf(3), wcs{,n}casecmp(3), and wcsdup(3). > o NULL is now a (void *). > o grep(1) now supports a -H option to always print filename headers. > o Whitelist expiry for spamlogd(8) can now be configured via a -W flag. > o ls(1) now supports the POSIX -H option to follow symbolic links > specified > on the command line. > o disklabel(8) now tries the next auto-allocation scheme if the current > one > fails due to insufficient available partitions. > o bc(1) gained editline(3) support. > o Many enhancements and new functionality has been added to tmux(1). > o disklabel(8) supports absolute resizing of partitions in > auto-allocated > labels. > o newfs(8) accepts k/m/g suffixes for the -S and -s options. > > - Install/Upgrade process changes: > o Completed support for DUID disk installs, and enabled it fully. > o Install non-free firmwares from the internet upon first boot, based > on a > question in the installer. > o svnd(4)-like behaviour became the default for vnd(4) devices. This is > what is used to build the media. > > - rc.d(8) framework improvements: > o rc.d(8) is now also used for the base system daemons. > o Backward compatible with the historic way of starting daemons. > o Notify the user by appending (ok) or (failed) in interactive mode. > o Better diagnostics with the introduction of RC_DEBUG. > > - OpenSSH 5.9: > o New features: > - Introduce sandboxing of the pre-auth privsep child using an > optional sshd_config(5) "UsePrivilegeSeparation=sandbox" mode > that enables mandatory restrictions on the syscalls the privsep > child can perform. > - Add new SHA256-based HMAC transport integrity modes from > http://www.ietf.org/id/draft-dbider-sha2-mac-for-ssh-02.txt > These modes are hmac-sha2-256, hmac-sha2-256-96, hmac-sha2-512, > and hmac-sha2-512-96, and are available by default in ssh(1) > and sshd(8). > - The pre-authentication sshd(8) privilege separation slave process > now logs via a socket shared with the master process, avoiding > the need to maintain /dev/log inside the chroot. > - ssh(1) now warns when a server refuses X11 forwarding. > - sshd_config(5)'s AuthorizedKeysFile now accepts multiple paths, > separated by whitespace. The undocumented AuthorizedKeysFile2 > option is deprecated (though the default for AuthorizedKeysFile > includes .ssh/authorized_keys2). > - sshd_config(5): similarly deprecate UserKnownHostsFile2 and > GlobalKnownHostsFile2 by making UserKnownHostsFile and > GlobalKnownHostsFile accept multiple options and default to > include known_hosts2. > - sshd_config(5)'s ControlPath option now expands %L to the host > portion of the destination host name. > - sshd_config(5) "Host" options now support negated Host matching. > - sshd_config(5): a new RequestTTY option provides control over > when a TTY is requested for a connection, similar to the existing > -t/-tt/-T ssh(1) commandline options. > - ssh-keygen(1): Add -A option. For each of the key types (rsa1, > rsa, dsa and ecdsa) for which host keys do not exist, generate > the host keys with the default key file path, an empty passphrase, > default bits for the key type, and default comment. This is useful > for system initialisation scripts. > - ssh(1): Allow graceful shutdown of multiplexing: request that > mux server removes its listener socket and refuse future > multiplexing requests but don't kill existing connections. This > may be requested using "ssh -O stop ...". > - ssh-add(1): now accepts keys piped from standard input. > - Retain key comments when loading v.2 keys. These will be visible > in "ssh-add -l" and other places. (bz#439) > - ssh(1) and sshd(8): set IPv6 traffic class from IPQoS (as well as > IPv4 ToS/DSCP). (bz#1855) > o The following significant bugs have been fixed in this > release: > - sshd(8): allow GSSAPI authentication to detect when a server-side > failure causes authentication failure and don't count such failures > against MaxAuthTries. (bz#1244) > - ssh-keysign(8): now signs hostbased authentication challenges > correctly using ECDSA keys. (bz#1858) > > - Over 7,200 ports, major robustness and speed improvements in package > tools. > - Many pre-built packages for each architecture: > o i386: 7008 o sparc64: 6456 > o alpha: 6046 o sh: 3721 > o amd64: 6960 o powerpc: 6691 > o sparc: 3277 o arm: 2963 > o hppa: 6125 o vax: 1409 > o mips64: 5689 o mips64el: 5709 > > - Some highlights: > o Gnome 2.32.2 o KDE 3.5.10 > o Xfce 4.8.0 o MySQL 5.1.54 > o PostgreSQL 9.0.5 o Postfix 2.8.4 > o OpenLDAP 2.3.43 and 2.4.25 o Mozilla Firefox 3.5.19, 3.6.18 and > 5.0 > o Mozilla Thunderbird 5.0 o GHC 7.0.4 > o LibreOffice 3.4.1.3 o Emacs 21.4, 22.3 and 23.3 > o Vim 7.3.154 o PHP 5.2.17 and 5.3.6 > o Python 2.4.6, 2.5.4 and 2.7.1 o Ruby 1.8.7.352 and 1.9.2.200 > o Mono 2.10.2 o Chromium 12.0.742.122 > o Groff 1.21 > > - As usual, steady improvements in manual pages and other documentation. > o Base system and Xenocara manuals are now installed as source code, > making grep(1) more useful in /usr/share/man/ and /usr/X11R6/man/. > o If both formatted and source versions of manuals are installed, > man(1) automatically displays the newer version of each page. > > - The system includes the following major components from outside > suppliers: > o Xenocara (based on X.Org 7.6 with xserver 1.9 + patches, > freetype 2.4.5, fontconfig 2.8.0, Mesa 7.8.2, xterm 270, > xkeyboard-config 2.3 and more) > o Gcc 2.95.3 (+ patches), 3.3.5 (+ patches) and 4.2.1 (+patches) > o Perl 5.12.2 (+ patches) > o Our improved and secured version of Apache 1.3, with > SSL/TLS and DSO support > o OpenSSL 1.0.0a (+ patches) > o Sendmail 8.14.5, with libmilter > o Bind 9.4.2-P2 (+ patches) > o Lynx 2.8.7rel.2 with HTTPS and IPv6 support (+ patches) > o Sudo 1.7.2p8 > o Ncurses 5.7 > o Heimdal 0.7.2 (+ patches) > o Arla 0.35.7 > o Binutils 2.15 (+ patches) > o Gdb 6.3 (+ patches) > > If you'd like to see a list of what has changed between OpenBSD 4.9 > and 5.0, look at > > http://www.OpenBSD.org/plus50.html > > Even though the list is a summary of the most important changes > made to OpenBSD, it still is a very very long list. > We provide patches for known security threats and other important > issues discovered after each CD release. As usual, between the > creation of the OpenBSD 5.0 FTP/CD-ROM binaries and the actual 4.9 > release date, our team found and fixed some new reliability problems > (note: most are minor and in subsystems that are not enabled by > default). Our continued research into security means we will find > new security problems -- and we always provide patches as soon as > possible. Therefore, we advise regular visits to > > http://www.OpenBSD.org/security.html > and > http://www.OpenBSD.org/errata.html > > Security patch announcements are sent to the security-annou...@openbsd.org > mailing list. For information on OpenBSD mailing lists, please see: > > http://www.OpenBSD.org/mail.html > OpenBSD 5.0 is also available on CD-ROM. The 3-CD set costs $50 CDN and > is available via mail order and from a number of contacts around the > world. The set includes a colourful booklet which carefully explains the > installation of OpenBSD. A new set of cute little stickers is also > included (sorry, but our FTP mirror sites do not support STP, the Sticker > Transfer Protocol). As an added bonus, the second CD contains an audio > track, a song entitled "What Me Worry?". MP3 and OGG versions of > the audio track can be found on the first CD. > > Lyrics (and an explanation) for the songs may be found at: > > http://www.OpenBSD.org/lyrics.html#50 > > Profits from CD sales are the primary income source for the OpenBSD > project -- in essence selling these CD-ROM units ensures that OpenBSD > will continue to make another release six months from now. > > The OpenBSD 5.0 CD-ROMs are bootable on the following four platforms: > > o i386 > o amd64 > o macppc > o sparc64 > > (Other platforms must boot from floppy, network, or other method). > > For more information on ordering CD-ROMs, see: > > http://www.OpenBSD.org/orders.html > > The above web page lists a number of places where OpenBSD CD-ROMs > can be purchased from. For our default mail order, go directly to: > > https://https.OpenBSD.org/cgi-bin/order > > All of our developers strongly urge you to buy a CD-ROM and support > our future efforts. Additionally, donations to the project are > highly appreciated, as described in more detail at: > > http://www.OpenBSD.org/goals.html#funding > For those unable to make their contributions as straightforward gifts, > the OpenBSD Foundation (http://www.openbsdfoundation.org) is a Canadian > not-for-profit corporation that can accept larger contributions and > issue receipts. In some situations, their receipt may qualify as a > business expense write-off, so this is certainly a consideration for > some organizations or businesses. There may also be exposure benefits > since the Foundation may be interested in participating in press releases. > In turn, the Foundation then uses these contributions to assist OpenBSD's > infrastructure needs. Contact the foundation directors at > direct...@openbsdfoundation.org for more information. > The OpenBSD distribution companies also sell tshirts and polo shirts. > And our users like them, too. We have a variety of shirts available, > with the new and old designs, from our web ordering system at, as > described above. > If you choose not to buy an OpenBSD CD-ROM, OpenBSD can be easily > installed via FTP or HTTP downloads. Typically you need a single > small piece of boot media (e.g., a boot floppy) and then the rest > of the files can be installed from a number of locations, including > directly off the Internet. Follow this simple set of instructions > to ensure that you find all of the documentation you will need > while performing an install via FTP or HTTP. With the CD-ROMs, > the necessary documentation is easier to find. > > 1) Read either of the following two files for a list of ftp/http > mirrors which provide OpenBSD, then choose one near you: > > http://www.OpenBSD.org/ftp.html > ftp://ftp.OpenBSD.org/pub/OpenBSD/5.0/ftplist > > As of Nov 1, 2011, the following ftp mirror sites have the 5.0 release: > > ftp://ftp.eu.openbsd.org/pub/OpenBSD/5.0/ Stockholm, Sweden > ftp://ftp.bytemine.net/pub/OpenBSD/5.0/ Oldenburg, Germany > ftp://ftp.ch.openbsd.org/pub/OpenBSD/5.0/ Zurich, Switzerland > ftp://ftp.fr.openbsd.org/pub/OpenBSD/5.0/ Paris, France > ftp://ftp5.eu.openbsd.org/pub/OpenBSD/5.0/ Vienna, Austria > ftp://mirror.aarnet.edu.au/pub/OpenBSD/5.0/ Brisbane, Australia > ftp://ftp.usa.openbsd.org/pub/OpenBSD/5.0/ CO, USA > ftp://ftp5.usa.openbsd.org/pub/OpenBSD/5.0/ CA, USA > ftp://obsd.cec.mtu.edu/pub/OpenBSD/5.0/ Michigan, USA > > The release is also available at the master site: > > ftp://ftp.openbsd.org/pub/OpenBSD/5.0/ Alberta, Canada > > However it is strongly suggested you use a mirror. > > Other mirror sites may take a day or two to update. > > 2) Connect to that ftp mirror site and go into the directory > pub/OpenBSD/5.0/ which contains these files and directories. > This is a list of what you will see: > > ANNOUNCEMENT armish/ mvme68k/ sparc64/ > Changelogs/ ftplist mvme88k/ src.tar.gz > HARDWARE hp300/ packages/ sys.tar.gz > PACKAGES hppa/ ports.tar.gz tools/ > PORTS i386/ root.mail vax/ > README landisk/ sgi/ xenocara.tar.gz > alpha/ mac68k/ socppc/ zaurus/ > amd64/ macppc/ sparc/ > > It is quite likely that you will want at LEAST the following > files which apply to all the architectures OpenBSD supports. > > README - generic README > HARDWARE - list of hardware we support > PORTS - description of our "ports" tree > PACKAGES - description of pre-compiled packages > root.mail - a copy of root's mail at initial login. > (This is really worthwhile reading). > > 3) Read the README file. It is short, and a quick read will make > sure you understand what else you need to fetch. > > 4) Next, go into the directory that applies to your architecture, > for example, i386. This is a list of what you will see: > > INSTALL.i386 cd50.iso floppyB50.fs pxeboot* > INSTALL.linux cdboot* floppyC50.fs xbase50.tgz > MD5 cdbr* game50.tgz xetc50.tgz > base50.tgz cdemu50.iso index.txt xfont50.tgz > bsd* comp50.tgz install50.iso xserv50.tgz > bsd.mp* etc50.tgz man50.tgz xshare50.tgz > bsd.rd* floppy50.fs misc50.tgz > > If you are new to OpenBSD, fetch _at least_ the file INSTALL.i386 > and the appropriate floppy*.fs or install50.iso files. Consult the > INSTALL.i386 file if you don't know which of the floppy images > you need (or simply fetch all of them). > > If you use the install50.iso file (roughly 250MB in size), then you > do not need the various *.tgz files since they are contained on that > one-step ISO-format install CD. > > 5) If you are an expert, follow the instructions in the file called > README; otherwise, use the more complete instructions in the > file called INSTALL.i386. INSTALL.i386 may tell you that you > need to fetch other files. > > 6) Just in case, take a peek at: > > http://www.OpenBSD.org/errata.html > > This is the page where we talk about the mistakes we made while > creating the 5.0 release, or the significant bugs we fixed > post-release which we think our users should have fixes for. > Patches and workarounds are clearly described there. > > Note: If you end up needing to write a raw floppy using Windows, > you can use "fdimage.exe" located in the pub/OpenBSD/5.0/tools > directory to do so. > X.Org has been integrated more closely into the system. This release > contains X.Org 7.6. Most of our architectures ship with X.Org, including > amd64, sparc, sparc64 and macppc. During installation, you can install > X.Org quite easily. Be sure to try out xdm(1) and see how we have > customized it for OpenBSD. > The OpenBSD ports tree contains automated instructions for building > third party software. The software has been verified to build and > run on the various OpenBSD architectures. The 5.0 ports collection, > including many of the distribution files, is included on the 3-CD > set. Please see the PORTS file for more information. > > Note: some of the most popular ports, e.g., the Apache web server > and several X applications, come standard with OpenBSD. Also, many > popular ports have been pre-compiled for those who do not desire > to build their own binaries (see BINARY PACKAGES, below). > A large number of binary packages are provided. Please see the PACKAGES > file (ftp://ftp.OpenBSD.org/pub/OpenBSD/5.0/PACKAGES) for more details. > The CD-ROMs contain source code for all the subsystems explained > above, and the README (ftp://ftp.OpenBSD.org/pub/OpenBSD/5.0/README) > file explains how to deal with these source files. For those who > are doing an FTP install, the source code for all four subsystems > can be found in the pub/OpenBSD/5.0/ directory: > > xenocara.tar.gz ports.tar.gz src.tar.gz sys.tar.gz > Ports tree and package building by Jasper Lievisse Adriaanse, > Landry Breuil, Michael Erdely, Stuart Henderson, Peter Hessler, > Paul Irofti, Antoine Jacoutot, Robert Nagy, and Christian Weisgerber. > System builds by Theo de Raadt, Mark Kettenis, and Miod Vallat. > X11 builds by Todd Fries and Miod Vallat. ISO-9660 filesystem > layout by Theo de Raadt. > > We would like to thank all of the people who sent in bug reports, bug > fixes, donation cheques, and hardware that we use. We would also like > to thank those who pre-ordered the 5.0 CD-ROM or bought our previous > CD-ROMs. Those who did not support us financially have still helped > us with our goal of improving the quality of the software. > > Our developers are: > > Alexander Bluhm, Alexander Hall, Alexander Schrijver, > Alexander Yurchenko, Alexandr Shadchin, Alexandre Ratchov, > Anil Madhavapeddy, Anthony J. Bentley, Antoine Jacoutot, > Ariane van der Steldt, Austin Hook, Benoit Lecocq, Bernd Ahlers, > Bob Beck, Bret Lambert, Charles Longeau, Chris Kuethe, > Christian Weisgerber, Christiano F. Haesbaert, Claudio Jeker, > Dale Rahn, Damien Bergamini, Damien Miller, Darren Tucker, > David Coppa, David Gwynne, David Hill, David Krause, Edd Barrett, > Eric Faurot, Federico G. Schwindt, Felix Kronlage, Gilles Chehade, > Giovanni Bechis, Gleydson Soares, Henning Brauer, Ian Darwin, > Igor Sobrado, Ingo Schwarze, Jacek Masiulaniec, Jakob Schlyter, > Janne Johansson, Jason George, Jason McIntyre, Jason Meltzer, > Jasper Lievisse Adriaanse, Jeremy Evans, Jim Razmus II, Joel Sing, > Joerg Zinke, Jolan Luff, Jonathan Armani, Jonathan Gray, > Jonathan Matthew, Jordan Hargrave, Joshua Stein, > Kenneth R Westerback, Kevin Lo, Kevin Steves, Kurt Miller, > Landry Breuil, Laurent Fanis, Marc Espie, Marco Peereboom, > Marco Pfatschbacher, Marcus Glocker, Mark Kettenis, Mark Lumsden, > Mark Uemura, Markus Friedl, Martin Pieuchot, Martynas Venckus, > Mats O Jansson, Matthew Dempsky, Matthias Kilian, Matthieu Herrb, > Michael Erdely, Mike Belopuhov, Mike Larkin, Miod Vallat, > Nayden Markatchev, Nicholas Marriott, Nick Holland, Nigel Taylor, > Nikolay Sturm, Okan Demirmen, Otto Moerbeek, Owain Ainsworth, > Paul de Weerd, Paul Irofti, Peter Hessler, Peter Valchev, > Philip Guenther, Pierre-Emmanuel Andre, Pierre-Yves Ritschard, > Remi Pointel, Reyk Floeter, Robert Nagy, Ryan Freeman, > Ryan Thomas McBride, Sasano, Sebastian Reitenbach, Simon Bertrang, > Stefan Sperling, Stephan A. Rickauer, Steven Mestdagh, > Stuart Henderson, Takuya Asada, Ted Unangst, Theo de Raadt, > Thordur I Bjornsson, Tobias Weingartner, Todd C. Miller, Todd Fries, > Will Maier, William Yodlowsky, Yasuoka Masahiko, Yojiro Uo