If the name after "host" starts with a number, I get an error in
/var/log/messages and dhcpd fails to load.
host 5tbgx280 {
hardware ethernet 00:11:43:2f:87:d5;
fixed-address 192.168.1.112;
}
Nov 17 10:53:57 pj dhcpd[8557]: /etc/dhcpd.conf line 115: expecting left
brace.
Nov 17 10:53:57 pj dhcpd[8557]: host 5tbgx280
Starting the name with a letter fixes the error.
I did not find any info on the acceptable format of the host statement
in the dhcpd.conf man entry.
Is this an oversight on my part, or something that might documented
elsewhere?
Thanks,
Bill
OpenBSD 5.0 GENERIC#71 i386
OpenBSD 5.0-current (GENERIC) #71: Fri Oct 7 12:57:13 MDT 2011
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz ("GenuineIntel"
686-class) 3 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1
real mem = 3487547392 (3325MB)
avail mem = 3420450816 (3261MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/19/08, BIOS32 rev. 0 @ 0xfdba0,
SMBIOS rev. 2.5 @ 0xcfedf000 (39 entries)
bios0: vendor Phoenix Technologies LTD version "1.2a" date 12/19/2008
bios0: Supermicro X7SBL
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP _MAR TCPA MCFG HPET APIC BOOT SPCR ERST HEST
BERT EINJ SLIC SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT
acpi0: wakeup devices PEG_(S5) PEX_(S5) LAN_(S5) USB4(S5) USB5(S5)
USB7(S5) ESB2(S5) EXP1(S5) EXP5(S5) EXP6(S5) USB1(S5) USB2(S5) USB3(S5)
USB6(S5) ESB1(S5) PCIB(S5) KBC0(S1) MSE0(S1) COM1(S5) COM2(S5) PWRB(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-16
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 332MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus -1 (PEX_)
acpiprt3 at acpi0: bus 5 (EXP1)
acpiprt4 at acpi0: bus 13 (EXP5)
acpiprt5 at acpi0: bus 15 (EXP6)
acpiprt6 at acpi0: bus 17 (PCIB)
acpicpu0 at acpi0: C3, PSS
acpibtn0 at acpi0: PWRB
acpivideo0 at acpi0: IGD0
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x2a00! 0xcaa00/0x1000
ipmi at mainbus0 not configured
cpu0: Enhanced SpeedStep 2993 MHz: speeds: 3000, 2667, 2333, 2000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 3200/3210 Host" rev 0x01
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 2 int 16
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 2 int 17
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02: apic 2 int 18
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 2 int 18
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 2 int 16
pci1 at ppb0 bus 5
ppb1 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: apic 2 int 16
pci2 at ppb1 bus 13
em0 at pci2 dev 0 function 0 "Intel PRO/1000MT (82573E)" rev 0x03: msi,
address 00:25:90:25:44:d8
ppb2 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02: apic 2 int 17
pci3 at ppb2 bus 15
em1 at pci3 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00: msi,
address 00:25:90:25:44:d9
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 2 int 23
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 2 int 22
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 2 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci4 at ppb3 bus 17
em2 at pci4 dev 2 function 0 "Intel PRO/1000GT (82541GI)" rev 0x05: apic
2 int 20, address 00:1b:21:2d:38:c2
vga1 at pci4 dev 4 function 0 "XGI Technology Volari Z9s/Z9m" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02: PM disabled
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x02: msi, AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 5 lun 0: <ATA, ST9750420AS, 0001> SCSI3 0/direct
fixed naa.5000c50029e59137
sd0: 715404MB, 512 bytes/sector, 1465149168 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 2
int 17
iic0 at ichiic0
lm1 at iic0 addr 0x2d: W83627HF
wbng0 at iic0 addr 0x2f: w83793g
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM ECC PC2-6400CL5
spdmem1 at iic0 addr 0x52: 2GB DDR2 SDRAM ECC PC2-6400CL5
"Intel 82801I Thermal" rev 0x02 at pci0 dev 31 function 6 not configured
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x41
lm2 at wbsio0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
lm1: disabling sensors due to alias with lm2
uhub8 at uhub5 port 2 "Dell Dell USB Keyboard Hub" rev 1.10/2.00 addr 2
uhidev0 at uhub8 port 1 configuration 1 interface 0 "Dell Dell USB
Keyboard" rev 1.10/2.00 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub8 port 1 configuration 1 interface 1 "Dell Dell USB
Keyboard" rev 1.10/2.00 addr 3
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 3: input=3, output=0, feature=0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (49070fccca7e16de.a) swap on sd0b dump on sd0b
