Hello, I am running OpenBSD current on a Lenovo SL-510 laptop (dmesg below) and xrandr rotate doesn't work as expected. When executing $ xrandr --output LVDS --rotate right picture goes completely gibberish, as seen in here: http://imageshack.us/photo/my-images/69/xrandr.jpg/
Currently I am using i3 window manager but it happens in Fluxbox too. Xorg.0.log diff (below) reveals sync problem (and apparently so does the picture). Please let me know how should I proceed. Sincerely, Ville Valkonen ### Xrandr: Screen 0: minimum 320 x 200, current 1366 x 768, maximum 4096 x 4096 VGA disconnected (normal left inverted right x axis y axis) LVDS connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1366x768 50.0* HDMI-1 disconnected (normal left inverted right x axis y axis) ### Xorg.0.log diff before and after the following commands ### xrandr --output LVDS --rotate right ### xrandr --output LVDS --rotate normal ### commands: --- xorg.old Thu Nov 24 12:31:32 2011 +++ xorg.new Thu Nov 24 12:31:47 2011 @@ -443,3 +443,26 @@ Release Date: 2011-11-04 [3575506.563] is lvds [3575506.564] (II) intel(0): using SSC reference clock of 96 MHz [3575506.583] (II) intel(0): Selecting standard 18 bit TMDS pixel format. +[3575738.681] (II) intel(0): EDID vendor "LEN", prod id 16560 +[3575738.681] (II) intel(0): Using hsync ranges from config file +[3575738.681] (II) intel(0): Using vrefresh ranges from config file +[3575738.681] (II) intel(0): Printing DDC gathered Modelines: +[3575738.681] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1718 768 771 775 806 -hsync -vsync (40.3 kHz) +[3575738.681] (II) intel(0): EDID vendor "LEN", prod id 16560 +[3575739.052] (II) intel(0): Allocated new frame buffer 768x1366 stride 3072, tiled +[3575739.082] (II) intel(0): New front buffer at 0xb344000 +[3575739.123] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled +[3575739.172] is lvds +[3575739.172] (II) intel(0): using SSC reference clock of 96 MHz +[3575739.192] (II) intel(0): Selecting standard 18 bit TMDS pixel format. +[3575742.527] (II) intel(0): EDID vendor "LEN", prod id 16560 +[3575742.527] (II) intel(0): Using hsync ranges from config file +[3575742.527] (II) intel(0): Using vrefresh ranges from config file +[3575742.527] (II) intel(0): Printing DDC gathered Modelines: +[3575742.527] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1718 768 771 775 806 -hsync -vsync (40.3 kHz) +[3575742.527] (II) intel(0): EDID vendor "LEN", prod id 16560 +[3575742.902] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled +[3575742.931] (II) intel(0): New front buffer at 0xbd44000 +[3575743.021] is lvds +[3575743.021] (II) intel(0): using SSC reference clock of 96 MHz +[3575743.041] (II) intel(0): Selecting standard 18 bit TMDS pixel format. ### Dmesg: ### OpenBSD 5.0-current (GENERIC) #114: Sun Nov 20 16:30:30 MST 2011 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC real mem = 2003517440 (1910MB) avail mem = 1936134144 (1846MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe0010 (44 entries) bios0: vendor LENOVO version "6JET83WW (1.41 )" date 09/21/2010 bios0: LENOVO 284756G acpi0 at bios0: rev 4 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP HPET MCFG APIC BOOT SLIC SSDT SSDT SSDT acpi0: wakeup devices P0P2(S4) P0P1(S4) USB0(S3) USB1(S3) USB2(S3) USBR(S3) EHC1(S3) USB3(S3) USB4(S3) USB5(S3) EHC2(S3) HDEF(S4) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) RP06(S4) BLAN(S4) LID_(S3) SLPB(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 Duo CPU T5870 @ 2.00GHz, 1995.30 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG cpu0: 2MB 64b/line 8-way L2 cache cpu0: apic clock running at 199MHz cpu at mainbus0: not configured ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (P0P2) acpiprt2 at acpi0: bus 7 (P0P1) acpiprt3 at acpi0: bus 2 (RP01) acpiprt4 at acpi0: bus 3 (RP02) acpiprt5 at acpi0: bus 4 (RP03) acpiprt6 at acpi0: bus 5 (RP04) acpiprt7 at acpi0: bus -1 (RP05) acpiprt8 at acpi0: bus 6 (RP06) acpiec0 at acpi0 acpicpu0 at acpi0: C2, C1, PSS acpitz0 at acpi0: critical temperature is 105 degC acpithinkpad0 at acpi0 acpiac0 at acpi0: AC unit online acpibat0 at acpi0: BAT1 model "42T4704" serial 681 type LION oem "Panasonic" acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: PWRB acpibtn2 at acpi0: SLPB cpu0: Enhanced SpeedStep 1995 MHz: speeds: 2001, 2000, 1600, 1200, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07 vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp0 at vga1 agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 inteldrm0 at vga1: apic 2 int 16 drm0 at inteldrm0 "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 16 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 21 uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 19 ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 19 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi azalia0: codecs: Realtek ALC269, Intel/0x2802, using Realtek ALC269 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi pci1 at ppb0 bus 2 "JMicron SD/MMC" rev 0x00 at pci1 dev 0 function 0 not configured sdhc0 at pci1 dev 0 function 2 "JMicron SD Host Controller" rev 0x00: apic 2 int 16 sdmmc0 at sdhc0 "JMicron Memory Stick" rev 0x00 at pci1 dev 0 function 3 not configured "JMicron xD" rev 0x00 at pci1 dev 0 function 4 not configured ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi pci2 at ppb1 bus 3 ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: msi pci3 at ppb2 bus 4 ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: msi pci4 at ppb3 bus 5 iwn0 at pci4 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: msi, MIMO 1T2R, MoW, address 00:24:d6:00:42:b6 ppb4 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x03: msi pci5 at ppb4 bus 6 re0 at pci5 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800), apic 2 int 17, address 00:26:9e:39:a9:be rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2 uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 23 uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 19 uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 18 ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93 pci6 at ppb5 bus 7 pcib0 at pci0 dev 31 function 0 "Intel 82801IBM LPC" rev 0x03 ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: <ATA, FUJITSU MJA2250B, 0084> SCSI3 0/direct fixed naa.500000e043e8eeb8 sd0: 238475MB, 512 bytes/sector, 488397168 sectors cd0 at scsibus0 targ 1 lun 0: <Optiarc, DVD RW AD-7590S, 1.L1> ATAPI 5/cdrom removable ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 2 int 19 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb7 at uhci5: USB revision 1.0 uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 wsmouse1 at pms0 mux 0 pms0: Synaptics touchpad, firmware 7.2 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 mtrr: Pentium Pro MTRR support sdmmc0: can't enable card vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on sd0a swap on sd0b dump on sd0b ### xorg.conf (though no affect when omitted) Section "Files" ModulePath "/usr/X11R6/lib/modules" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/TTF/" FontPath "/usr/X11R6/lib/X11/fonts/OTF" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/local/share/ghostscript/fonts/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/local/lib/X11/fonts/Droid/" EndSection Section "InputDevice" Identifier "TouchPad0" Driver "synaptics" Option "Device" "/dev/wsmouse0" #Option "AutoServerLayout" "true" #Option "ZAxisMapping" "4 5 6 7" EndSection Section "InputDevice" Identifier "TrackPoint1" Driver "mouse" #Option "Protocol" "wsmouse" Option "Device" "/dev/wsmouse1" Option "Emulate3Buttons" "false" Option "EmulateWheel" "true" Option "EmulateWheelButton" "2" #Option "AutoServerLayout" "true" #Option "ZAxisMapping" "4 5 6 7" EndSection Section "InputDevice" Identifier "Mouse" Driver "mouse" Option "Device" "/dev/wsmouse2" #Option "AutoServerLayout" "true" EndSection Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "TouchPad0" "SendCoreEvents" InputDevice "TrackPoint1" "CorePointer" InputDevice "Mouse" "SendCoreEvents" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Keyboard1" "SendCoreEvents" #Option "AutoAddDevices" "false" EndSection Section "Module" Load "dbe" Load "dri" Load "dri2" Load "extmod" Load "glx" Load "record" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "Keyboard" #Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "fi" EndSection Section "InputDevice" Identifier "Keyboard1" Driver "Keyboard" #Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "fi" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "ColorKey" # <i> #Option "CacheLines" # <i> #Option "Dac6Bit" # [<bool>] #Option "DRI" # [<bool>] #Option "NoDDC" # [<bool>] #Option "ShowCache" # [<bool>] #Option "XvMCSurfaces" # <i> #Option "PageFlip" # [<bool>] # Option "AccelMethod" "UXA" Identifier "Card0" Driver "intel" VendorName "Intel" BoardName "GM45 Video" BusID "PCI:0:2:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" # SubSection "Display" # Viewport 0 0 # Depth 1 # EndSubSection # SubSection "Display" # Viewport 0 0 # Depth 4 # EndSubSection # SubSection "Display" # Viewport 0 0 # Depth 8 # EndSubSection # SubSection "Display" # Viewport 0 0 # Depth 15 # EndSubSection # SubSection "Display" # Viewport 0 0 # Depth 16 # EndSubSection SubSection "Display" Viewport 0 0 Depth 24 # Virtual 8192 8192 EndSubSection EndSection