I made the following changes and recompiled. It looks like the card is now recognized, but they array (and disks) are not. I am attaching my dmesg output from the two changes that I made:
pcidevs: product SYMBIOS 1068 0x0054 1068 mpt_pci.c: { PCI_VENDOR_SYMBIOS, PCI_PRODUCT_SYMBIOS_1068, MPP_F_DUAL }, that was the first re-compile, then I re-edited with: { PCI_VENDOR_SYMBIOS, PCI_PRODUCT_SYMBIOS_1068, MPP_F_FC }, I also had to edit these files to get it to compile: pcidevs.h: #define PCI_PRODUCT_SYMBIOS_1068 0x0054 /* 1068 */ and pcidevs_data.h: { PCI_VENDOR_SYMBIOS, PCI_PRODUCT_SYMBIOS_1068, "1068", }, Here is my dmesg output after the recompile / reboot with the MPP_F_DUAL in my mpt_pci.c file: OpenBSD 3.7-stable (GENERIC.NEW) #0: Fri Oct 28 12:20:36 EDT 2005 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.NEW cpu0: Intel(R) Pentium(R) 4 CPU 3.40GHz ("GenuineIntel" 686-class) 3.40 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,PNI,MWAIT,CNXT-ID real mem = 1073270784 (1048116K) avail mem = 972853248 (950052K) using 4278 buffers containing 53768192 bytes (52508K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000 pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000 pcibios0: PCI BIOS has 6 Interrupt Routing table entries pcibios0: no compatible PCI ICU found pcibios0: Warning, unable to fix up PCI interrupt routing pcibios0: PCI bus #5 is the last bus bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4800 0xcc800/0x3400! 0xcfc00/0x1600 0xee000/0x2000! cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel E7221 MCH Host" rev 0x05 ppb0 at pci0 dev 1 function 0 "Intel E7221 PCIE" rev 0x05 pci1 at ppb0 bus 1 ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09 pci2 at ppb1 bus 2 bge0 at pci2 dev 1 function 0 "Broadcom BCM5704C" rev 0x10, unknown BCM5704 (0x2100): irq 5 address 00:14:c2:3b:f1:77 brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0 bge1 at pci2 dev 1 function 1 "Broadcom BCM5704C" rev 0x10, unknown BCM5704 (0x2100): irq 10 address 00:14:c2:3b:f1:76 brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0 mpt0 at pci2 dev 3 function 0 "Symbios Logic 1068" rev 0x00: irq 11 mpt0: Unsupported Port Type (30) ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09 pci3 at ppb2 bus 3 ppb3 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03 pci4 at ppb3 bus 4 uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 5 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 10 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 7 usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 11 usb3 at uhci3: USB revision 1.0 uhub3 at usb3 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 5 ehci0: EHCI version 1.0 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3 usb4 at ehci0: USB revision 2.0 uhub4 at usb4 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: single transaction translator uhub4: 8 ports with 8 removable, self powered ppb4 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd3 pci5 at ppb4 bus 5 vendor "Compaq", unknown product 0xb203 (class system subclass miscellaneous, rev 0x01) at pci5 dev 2 function 0 not configured vendor "Compaq", unknown product 0xb204 (class system subclass miscellaneous, rev 0x01) at pci5 dev 2 function 2 not configured vga1 at pci5 dev 3 function 0 "ATI Rage XL" rev 0x27 wsdisplay0 at vga1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x03 pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility pciide0: channel 0 disabled (no drives) pciide0: channel 1 disabled (no drives) pciide1 at pci0 dev 31 function 2 "Intel 82801FR SATA" rev 0x03: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using irq 10 for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: <Maxtor 6L080M0> wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> sysbeep0 at pcppi0 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 biomask efe5 netmask efe5 ttymask ffe7 pctr: user-level cycle counter enabled dkcsum: wd0 matched BIOS disk 80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 uhub1: port 1, set config at addr 2 failed uhub1: device problem, disabling port 1 Here is my dmesg output after the recompile / reboot with the MPP_F_FC in my mpt_pci.c file: OpenBSD 3.7-stable (GENERIC.NEW) #1: Tue Jun 21 14:02:34 EDT 2005 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.NEW cpu0: Intel(R) Pentium(R) 4 CPU 3.40GHz ("GenuineIntel" 686-class) 3.40 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,PNI,MWAIT,CNXT-ID real mem = 1073270784 (1048116K) avail mem = 972853248 (950052K) using 4278 buffers containing 53768192 bytes (52508K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000 pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000 pcibios0: PCI BIOS has 6 Interrupt Routing table entries pcibios0: no compatible PCI ICU found pcibios0: Warning, unable to fix up PCI interrupt routing pcibios0: PCI bus #5 is the last bus bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4800 0xcc800/0x3400! 0xcfc00/0x1600 0xee000/0x2000! cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel E7221 MCH Host" rev 0x05 ppb0 at pci0 dev 1 function 0 "Intel E7221 PCIE" rev 0x05 pci1 at ppb0 bus 1 ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09 pci2 at ppb1 bus 2 bge0 at pci2 dev 1 function 0 "Broadcom BCM5704C" rev 0x10, unknown BCM5704 (0x2100): irq 5 address 00:14:c2:3b:f1:77 brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0 bge1 at pci2 dev 1 function 1 "Broadcom BCM5704C" rev 0x10, unknown BCM5704 (0x2100): irq 10 address 00:14:c2:3b:f1:76 brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0 mpt0 at pci2 dev 3 function 0 "Symbios Logic 1068" rev 0x00: irq 11 mpt0: Unsupported Port Type (30) ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09 pci3 at ppb2 bus 3 ppb3 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03 pci4 at ppb3 bus 4 uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 5 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 10 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 7 usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 11 usb3 at uhci3: USB revision 1.0 uhub3 at usb3 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 5 ehci0: EHCI version 1.0 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3 usb4 at ehci0: USB revision 2.0 uhub4 at usb4 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: single transaction translator uhub4: 8 ports with 8 removable, self powered ppb4 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd3 pci5 at ppb4 bus 5 vendor "Compaq", unknown product 0xb203 (class system subclass miscellaneous, rev 0x01) at pci5 dev 2 function 0 not configured vendor "Compaq", unknown product 0xb204 (class system subclass miscellaneous, rev 0x01) at pci5 dev 2 function 2 not configured vga1 at pci5 dev 3 function 0 "ATI Rage XL" rev 0x27 wsdisplay0 at vga1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x03 pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility pciide0: channel 0 disabled (no drives) pciide0: channel 1 disabled (no drives) pciide1 at pci0 dev 31 function 2 "Intel 82801FR SATA" rev 0x03: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using irq 10 for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: <Maxtor 6L080M0> wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> sysbeep0 at pcppi0 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 biomask efe5 netmask efe5 ttymask ffe7 pctr: user-level cycle counter enabled dkcsum: wd0 matched BIOS disk 80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 uhidev0 at uhub1 port 1 configuration 1 interface 0 uhidev0: Avocent USB DSRIQ, rev 1.10/1.00, addr 2, iclass 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub1 port 1 configuration 1 interface 1 uhidev1: Avocent USB DSRIQ, rev 1.10/1.00, addr 2, iclass 3/1 uhidev1: 3 report ids ums0 at uhidev1 reportid 1: 5 buttons and Z dir. wsmouse1 at ums0 mux 0 uhid0 at uhidev1 reportid 2: input=2, output=0, feature=0 uhid1 at uhidev1 reportid 3: input=1, output=0, feature=0 --- Theo de Raadt <[EMAIL PROTECTED]> wrote: > > The chipset is LSI SAS 1068, and according to LSI, > > supported with the mpt driver. Here is the link > to > > LSI's information: > > > > > http://www.lsilogic.com/products/sas_ics/lsisas1068.html > > Unlike what Olivier had to pipe up with (why are so > many of our > users sending useless mails these days?)... > > This appears to be an MPT varient which is new, and > not yet supported. > I have made sure that Marco (mpt driver maintainer) > sees the mail. > > Thanks for the report.