hello,

since when the rum driver has been written I'm using it as AP, bridged
w/ the ethernet if i.e

hostname.msk0:
dhcp NONE NONE NONE

hostname.rum0:
up mediaopt hostap chan 1 mode 11g nwid AP wpa wpakey pwd

hostname.bridge0:
add msk0
add rum0
up

I've recently started suspendig the box (zzz) leaving the usb WLAN in
the box's usb bay.
upon resuming from suspend as soon as the WLAN makes traffic it stops
working w/

a timeout (watchdog) error and then w/ a
could not multi read (or write) MAC register  error (see if_rum.c)

forcing me to reboot the box. anybody else w/ this problem?

I'm running the latest snapshot but it happened also w/  the previous ones

OpenBSD 5.0-current (GENERIC.MP) #155: Sat Dec 10 07:57:12 MST 2011
    dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 1062797312 (1013MB)
avail mem = 1020416000 (973MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xdc010 (18 entries)
bios0: vendor Phoenix Technologies LTD version "R0034J4" date 02/26/2007
bios0: Sony Corporation VGN-C1S_H
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG APIC BOOT SSDT SSDT
acpi0: wakeup devices PWRB(S4) PXS1(S3) PXS2(S3) PXS3(S3) PXS4(S3)
USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB7(S3) LANC(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz, 1662.74 MHz
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz, 1662.50 MHz
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG
cpu1: 2MB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEGP)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus 4 (RP02)
acpiprt4 at acpi0: bus 6 (RP03)
acpiprt5 at acpi0: bus 8 (RP04)
acpiprt6 at acpi0: bus 10 (PCIB)
acpiec0 at acpi0
acpicpu0 at acpi0: C2, C1, PSS
acpicpu1 at acpi0: C2, C1, PSS
acpitz0 at acpi0: critical temperature is 105 degC
acpitz1 at acpi0: critical temperature is 105 degC
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 not present
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpidock0 at acpi0: DOCK not docked (0)
acpisony0 at acpi0: SNC_
acpivideo0 at acpi0: GFX0
cpu0: Enhanced SpeedStep 1662 MHz: speeds: 1667, 1333, 1000 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xb0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16
drm0 at inteldrm0
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Realtek ALC262, Conexant/0x2c06, using Realtek ALC262
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: msi
pci1 at ppb0 bus 2
mskc0 at pci1 dev 0 function 0 "Marvell Yukon 88E8036" rev 0x13,
Yukon-2 FE rev. A1 (0x1): apic 1 int 16
msk0 at mskc0 port A: address 00:13:a9:60:1b:eb
eephy0 at msk0 phy 0: 88E3082 10/100 PHY, rev. 3
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: msi
pci2 at ppb1 bus 4
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: msi
pci3 at ppb2 bus 6
wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02:
msi, MoW2, address 00:18:de:ad:3e:96
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: msi
pci4 at ppb3 bus 8
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 17
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 10
cbb0 at pci5 dev 3 function 0 "TI PCIXX12 CardBus" rev 0x00: apic 1
int 16, CardBus support disabled
"TI PCIXX12 FireWire" rev 0x00 at pci5 dev 3 function 1 not configured
"TI PCIXX12 Multimedia Card Reader" rev 0x00 at pci5 dev 3 function 2
not configured
cardslot0 at cbb0 slot 0 flags 0
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PIONEER, DVD-RW DVR-K16M, 1.10> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 1 int 19 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <HTS541010G9SA00>
wd0: 16-sector PIO, LBA48, 95396MB, 195371568 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 512MB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: ALPS Glidepoint, version 0x7321
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
rum0 at uhub0 port 1 "Belkin Belkin 54g USB Network Adapter" rev
2.00/0.01 addr 2
rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address 00:22:75:ae:22:98
umass0 at uhub0 port 6 configuration 1 interface 0 "Sony UMH-U09" rev
2.00/4.52 addr 3
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <Sony, USB HS-CARD, 4.52> SCSI0 0/direct
removable serial.054c0281F0000021E45C
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a swap on wd0b dump on wd0b


-- 
see ya,
giovanni

Reply via email to