On Mon, Dec 12, 2011 at 5:02 PM, <sc...@web.de> wrote: > Peter Kay <syllops...@syllopsium.co.uk> wrote: > >> Wikipedia says 'AMD64 supported by: all models with an OPN ending in >> BX and CV' and 'E6 stepping or later' > > It seems I have a BO: SSE3, but not AMD64 according to dmesg. > > Henning Brauer <lists-open...@bsws.de> wrote: > >> this one is a no-brainer. [...] boot amd64 bsd.rd. >> either it boots or it doesn't. > > How do you exclude the possibility of something in > between? It booted and installed, but it is > perhaps not the right image. Should I use an > intel image? there is no AMD without 64.
Woooot? If it's booting and installing then why do you think that it's not correct image? What is Intel image? i386/amd64 is platform suited for any vendor be it Intel, AMD or VIA. > > BTW: the ethernet on the motherboard (Asus K8U-X) does not work. BTW try current snapshot if it's still unsupported. > > Rod. > > ------- > > Here my dmesg after installing: > > OpenBSD 5.0 (GENERIC) #53: Wed Aug 17 10:07:52 MDT 2011 > B B dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC > real mem = 2146238464 (2046MB) > avail mem = 2075078656 (1978MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0500 (58 entries) > bios0: vendor American Megatrends Inc. version "0703" date 09/08/2005 > bios0: ASUSTeK Computer INC. K8U-X > acpi0 at bios0: rev 0 > acpi0: sleep states S0 S1 S3 S4 S5 > acpi0: tables DSDT FACP APIC OEMB > acpi0: wakeup devices HTT_(S4) AC97(S4) MC97(S4) LAN_(S4) USB0(S4) USB1(S4) USB2(S4) UB20(S4) > acpitimer0 at acpi0: 3579545 Hz, 32 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: AMD Sempron(tm) Processor 3000+, 1800.13 MHz > cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 128KB 64b/line 16-way L2 cache > cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative > cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative > cpu0: AMD erratum 89 present, BIOS upgrade may be required > cpu0: apic clock running at 199MHz > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 11, 24 pins > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (P0P1) > acpiprt2 at acpi0: bus 2 (HTT_) > acpicpu0 at acpi0: PSS > acpibtn0 at acpi0: PWRB > cpu0: Cool'n'Quiet K8 1800 MHz: speeds: 1800 1000 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Acer Labs M1689 PCI" rev 0x00 > agp at pchb0 not configured > ppb0 at pci0 dev 1 function 0 "Acer Labs M5246 AGP" rev 0x00 > pci1 at ppb0 bus 1 > vga1 at pci1 dev 0 function 0 "ATI Radeon VE" rev 0x00 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > radeondrm0 at vga1: apic 1 int 16 > drm0 at radeondrm0 > ppb1 at pci0 dev 2 function 0 "Acer Labs M5249 PCI-PCI" rev 0x00 > pci2 at ppb1 bus 2 > pcib0 at pci0 dev 3 function 0 "Acer Labs M1563 ISA" rev 0x70 > "Acer Labs M7101 Power" rev 0x00 at pci0 dev 3 function 1 not configured > auacer0 at pci0 dev 4 function 0 "Acer Labs M5455 Audio" rev 0x20: apic 1 int 18 > ac97: codec id 0x41445368 (Analog Devices AD1888) > ac97: codec features headphone, 20 bit DAC, No 3D Stereo > audio0 at auacer0 > "Acer Labs M5263 LAN" rev 0x40 at pci0 dev 13 function 0 not configured > pciide0 at pci0 dev 14 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc7: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility > wd0 at pciide0 channel 0 drive 0: <WDC AC14300R> > wd0: 16-sector PIO, LBA, 4112MB, 8421840 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 > atapiscsi0 at pciide0 channel 1 drive 0 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <ATAPI, CD-ROM DRIVE-24X, 242M> ATAPI 5/cdrom removable > cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 > "Acer Labs M5289 SATA" rev 0x10 at pci0 dev 14 function 1 not configured > ohci0 at pci0 dev 15 function 0 "Acer Labs M5237 USB" rev 0x03: apic 1 int 20, version 1.0, legacy support > ohci1 at pci0 dev 15 function 1 "Acer Labs M5237 USB" rev 0x03: apic 1 int 21, version 1.0, legacy support > ohci2 at pci0 dev 15 function 2 "Acer Labs M5237 USB" rev 0x03: apic 1 int 22, version 1.0, legacy support > ehci0 at pci0 dev 15 function 3 "Acer Labs M5239 USB2" rev 0x01: apic 1 int 23 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Acer Labs EHCI root hub" rev 2.00/1.00 addr 1 > pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00 > pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00 > pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00 > kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > it0 at isa0 port 0x2e/2: IT8712F rev 7, EC port 0xd00 > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > usb1 at ohci0: USB revision 1.0 > uhub1 at usb1 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1 > usb2 at ohci1: USB revision 1.0 > uhub2 at usb2 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1 > usb3 at ohci2: USB revision 1.0 > uhub3 at usb3 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1 > mtrr: Pentium Pro MTRR support > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > scsibus2 at softraid0: 256 targets > root on wd0a (e355167f2f90bdda.a) swap on wd0b dump on wd0b > umass0 at uhub0 port 3 configuration 1 interface 0 "Toshiba Corp USB Flash Memory" rev 2.00/1.00 addr 2 > umass0: using SCSI over Bulk-Only > scsibus3 at umass0: 2 targets, initiator 0 > sd0 at scsibus3 targ 1 lun 0: <, USB Flash Memory, 5.00> SCSI0 0/direct removable serial.09306545747051F1C95A > sd0: 1967MB, 512 bytes/sector, 4028416 sectors
