Hi there,
i've installed 5.0-Release on TP X32 Pentium M 1,7 Ghz. Works fine, suspend
works via apm (after starting apmd), but resume fails. Under X and on the
console, the screen comes back, cursor is blinking an that's it. Pressing
ON/OFF forces a quick reaction and simply powers down. The latest release i
worked with was 4.6. Has this possibly something to to with the encrypted
softraid0 in combination with the CF card ???
ThX
Andri
--- snip dmesg ---
OpenBSD 5.0 (GENERIC) #43: Wed Aug 17 10:10:52 MDT 2011
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1.70GHz ("GenuineIntel" 686-class)
600 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,
SSE,SSE2,SS,TM,SBF,EST,TM2
real mem = 2146365440 (2046MB)
avail mem = 2101198848 (2003MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/22/05, BIOS32 rev. 0 @ 0xfd750,
SMBIOS rev. 2.33 @ 0xe0010 (57 entries)
bios0: vendor IBM version "1QET97WW (3.02 )" date 09/22/2005
bios0: IBM 2672P14
apm0 at bios0: Power Management spec V1.2
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xfd6e0/0x920
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/272 (15 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #6 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xdc000/0x4000! 0xe0000/0x10000
cpu0 at mainbus0: (uniprocessor)
cpu0: Enhanced SpeedStep 600 MHz: speeds: 1700, 1400, 1200, 1000, 800, 600
MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
io address conflict 0x5800/0x8
io address conflict 0x5808/0x4
io address conflict 0x5810/0x8
io address conflict 0x580c/0x4
pchb0 at pci0 dev 0 function 0 "Intel 82855PM Host" rev 0x03
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xd0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0 "Intel 82855PM AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M6" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: irq 11
drm0 at radeondrm0
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81
pci2 at ppb1 bus 2
mem address conflict 0xb0000000/0x1000
mem address conflict 0xb1000000/0x1000
cbb0 at pci2 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xaa: irq 11
cbb1 at pci2 dev 0 function 1 "Ricoh 5C476 CardBus" rev 0xaa: irq 11
"Ricoh 5C552 Firewire" rev 0x02 at pci2 dev 0 function 2 not configured
em0 at pci2 dev 1 function 0 "Intel PRO/1000MT (82540EP)" rev 0x03: irq 11,
address 00:11:25:b4:ad:0b
ral0 at pci2 dev 2 function 0 "Ralink RT2561S" rev 0x00: irq 11, address
00:1f:d0:1c:46:eb
ral0: MAC/BBP RT2561C, RF RT2527
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 6 device 0 cacheline 0x0, lattimer 0xb0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01: 24-bit
timer at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD2500BEVE-00WZT0>
wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: irq 11
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM non-parity PC2700CL2.5
spdmem1 at iic0 addr 0x51: 1GB DDR SDRAM non-parity PC2700CL2.5
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 11,
ICH4 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
wdc2 at pcmcia1 function 0 "TRANSCEND, TS4GCF133, " port 0x3000/16
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
scsibus1 at softraid0: 256 targets
wd1 at wdc2 channel 0 drive 0: <TRANSCEND>
wd1: 1-sector PIO, LBA, 3823MB, 7831152 sectors
wd1(wdc2:0:0): using BIOS timings
softraid0: sd0 was not shutdown properly
sd0 at scsibus1 targ 1 lun 0: <OPENBSD, SR CRYPTO, 004> SCSI2 0/direct fixed
sd0: 236360MB, 512 bytes/sector, 484066272 sectors
root device (default wd0a): sd0a
swap device (default sd0b): wd0b
root on sd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
umass0 at uhub0 port 3 configuration 1 interface 0 "Verbatim STORE N GO"
rev 2.00/11.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
--- snap dmesg ---
