On Thu, Feb 09, 2012 at 12:39:32AM +0400, Alexander Polakov wrote:
>
> I also noticed that with default (no) sndiod flags azalia0 interrupts
> go high (200) while it's 50 when I use flags above.
>

200 is the expected value. But stuttering isn't expected :/

I was using mplayer run from terminal, and I can hear high pitches
(something like clicks) each time I change the workspaces or tabs in
browser, but no problem when I type.
When I watch movies, those high pitches are always there in fullscreen
mode, they are not in standard mode. They are gone if I use
gnome-mplayer, both standard and fullscreen.
I was checking with audioctl play.errors when mplayer is running in
fullscreen mode, and there is always a number greater than 0 that is
increasing. Those were not there in older versions of OpenBSD.

dmesg follows:

OpenBSD 5.1-beta (GENERIC) #143: Thu Jan 26 16:02:00 MST 2012
    dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 3.20GHz ("GenuineIntel" 686-class) 3.20 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,xTPR
real mem  = 1071751168 (1022MB)
avail mem = 1044127744 (995MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 07/07/06, BIOS32 rev. 0 @
0xffe90, SMBIOS rev. 2.3 @ 0xf0450 (72 entries)
bios0: vendor Dell Inc. version "A08" date 07/07/2006
bios0: Dell Inc. Precision WorkStation 370
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC BOOT ASF! MCFG HPET
acpi0: wakeup devices VBTN(S4) PCI0(S5) PCI1(S5) PCI2(S5) PCI3(S5)
PCI4(S5) MOU_(S3) USB0(S3) USB1(S3) USB2(S3) USB3(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199MHz
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 4 (PCI1)
acpiprt1 at acpi0: bus 2 (PCI2)
acpiprt2 at acpi0: bus 3 (PCI3)
acpiprt3 at acpi0: bus 1 (PCI4)
acpiprt4 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0
acpibtn0 at acpi0: VBTN
bios0: ROM list: 0xc0000/0xf800 0xcf800/0x800
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82925X Host" rev 0x04
ppb0 at pci0 dev 1 function 0 "Intel 82925X PCIE" rev 0x04: apic 8 int 16
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon X1650 Pro" rev 0x9e
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: apic 8 int 16
drm0 at radeondrm0
"ATI Radeon X1650 Pro Sec" rev 0x9e at pci1 dev 0 function 1 not configured
ppb1 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03: apic 8 int 16
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM5751" rev 0x01, BCM5750 A1
(0x4001): apic 8 int 16, address 00:13:20:18:a2:cf
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb2 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x03: apic 8 int 17
pci3 at ppb2 bus 3
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: apic 8 int 21
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: apic 8 int 22
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: apic 8 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: apic 8 int 23
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: apic 8 int 21
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd3
pci4 at ppb3 bus 4
emu0 at pci4 dev 2 function 0 "Creative Labs SoundBlaster Live" rev
0x07: apic 8 int 18
ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at emu0
"Creative Labs PCI Gameport Joystick" rev 0x07 at pci4 dev 2 function
1 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x03: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PIONEER, DVD-RW DVR-116D, 1.06> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801FR SATA" rev 0x03: apic 8
int 20, AHCI 1.0
ahci0: PHY offline on port 1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD3200AAKS-0, 40.0> SCSI3
0/direct fixed naa.50014ee1018094dc
sd0: 305245MB, 512 bytes/sector, 625142448 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: SMI
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-3200CL5
spdmem1 at iic0 addr 0x52: 512MB DDR2 SDRAM non-parity PC2-3200CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhidev0 at uhub4 port 1 configuration 1 interface 0 "SIGMACH1P USB
Keykoard" rev 1.10/1.10 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub4 port 1 configuration 1 interface 1 "SIGMACH1P USB
Keykoard" rev 1.10/1.10 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (1900b51f06c532ad.a) swap on sd0b dump on sd0b

Reply via email to