Hello, I'm testing OpenBSD with L3VPN, everything is working fine except from the RT import / export side.
I usually configure my VPN with PE Loopback:identifier, so my config looks like this: PE1: rdomain 20 { rd 1.1.1.1:20 import-target rt 2.2.2.2:20 export-target rt 1.1.1.1:20 depend on mpe20 network inet connected } PE2: rdomain 20 { rd 2.2.2.2:20 import-target rt 1.1.1.1:20 export-target rt 2.2.2.2:20 depend on mpe20 network inet connected } This kind of configuration works on Cisco devices for example, but here PE1: # bgpctl show fib table 20 flags: * = valid, B = BGP, C = Connected, S = Static N = BGP Nexthop reachable via this route r = reject route, b = blackhole route flags prio destination gateway *C 0 127.0.0.0/8 link#0 *C 4 172.16.35.0/24 link#2 *C 0 ::1/128 link#0 PE2: # bgpctl sho fib table 20 flags: * = valid, B = BGP, C = Connected, S = Static N = BGP Nexthop reachable via this route r = reject route, b = blackhole route flags prio destination gateway *C 0 127.0.0.0/8 link#0 *C 4 172.16.39.0/24 link#3 *C 0 ::1/128 link#0 It works fine when I set the same RD on both PE, but that's not really what I'm looking for. I can't find much debug information, any hints on how to tshoot this? Thanks for your help, Remi