Miguel wrote:
Miguel wrote:
Hi, i have some problems with my quad ethernet in a netra x1
firewall, this is not the first time i face this, some months ago i
had the very same problem, i was able to fix it following this
excelent instructions:
http://marc.theaimsgroup.com/?l=openbsd-sparc&m=108890209508001&w=2
Howerver, after the upgrade from 3.5 to 3.7 (a full new install,
format disks, etc), the problem is there again, these the dmseg log:
hme0 at pci3 dev 0 function 1 "Sun HME" rev 0x01: address
00:03:ba:39:bf:9a
ukphy2 at hme0 phy 1: Generic IEEE 802.3u media interface
ukphy2: OUI 0x00601d, model 0x000c, rev. 1
hme0: using ivec 3005 for interrupt
"Sun PCIO Ebus2" rev 0x01 at pci3 dev 1 function 0 not configured
hme1 at pci3 dev 1 function 1 "Sun HME" rev 0x01: address
00:03:ba:39:bf:9b
ukphy3 at hme1 phy 1: Generic IEEE 802.3u media interface
ukphy3: OUI 0x00601d, model 0x000c, rev. 1
hme1: using ivec 3004 for interrupt
"Sun PCIO Ebus2" rev 0x01 at pci3 dev 2 function 0 not configured
hme2 at pci3 dev 2 function 1 "Sun HME" rev 0x01: address
00:03:ba:39:bf:9c
ukphy4 at hme2 phy 1: Generic IEEE 802.3u media interface
ukphy4: OUI 0x00601d, model 0x000c, rev. 1
hme2: using ivec 3005 for interrupt
"Sun PCIO Ebus2" rev 0x01 at pci3 dev 3 function 0 not configured
hme3 at pci3 dev 3 function 1 "Sun HME" rev 0x01: address
00:03:ba:39:bf:9d
ukphy5 at hme3 phy 1: Generic IEEE 802.3u media interface
ukphy5: OUI 0x00601d, model 0x000c, rev. 1
hme3: using ivec 3004 for interrupt
pcons at mainbus0 not configured
hme0 is using 3005 for interrupt, the same that hme2, hme1 is using
3004 for interrupt, the same that hme3, etc
I havent changed anything, i only booted from the 3.7 cd and started
from scratch.
what can i do?
thanks
Hi, the problem has gone away after installing the lastest release
(3.8), without the nvramrc workaround, so , i configured :
setenv use-nvramrc? false on the ok prompt.
dmesg:
ppb2 at pci2 dev 5 function 0 "Intel S21154AE/BE PCI-PCI" rev 0x00
pci3 at ppb2 bus 3
"Sun PCIO Ebus2" rev 0x01 at pci3 dev 0 function 0 not configured
hme0 at pci3 dev 0 function 1 "Sun HME" rev 0x01: address 00:03:ba:39:bf:9a
luphy0 at hme0 phy 1: LU6612 10/100 PHY, rev. 1
hme0: using ivec 3005 for interrupt
"Sun PCIO Ebus2" rev 0x01 at pci3 dev 1 function 0 not configured
hme1 at pci3 dev 1 function 1 "Sun HME" rev 0x01: address 00:03:ba:39:bf:9b
luphy1 at hme1 phy 1: LU6612 10/100 PHY, rev. 1
hme1: using ivec 3014 for interrupt
"Sun PCIO Ebus2" rev 0x01 at pci3 dev 2 function 0 not configured
hme2 at pci3 dev 2 function 1 "Sun HME" rev 0x01: address 00:03:ba:39:bf:9c
luphy2 at hme2 phy 1: LU6612 10/100 PHY, rev. 1
hme2: using ivec 3004 for interrupt
"Sun PCIO Ebus2" rev 0x01 at pci3 dev 3 function 0 not configured
hme3 at pci3 dev 3 function 1 "Sun HME" rev 0x01: address 00:03:ba:39:bf:9d
luphy3 at hme3 phy 1: LU6612 10/100 PHY, rev. 1
hme3: using ivec 3015 for interrupt
pcons at mainbus0 not configured
thanks, great work,
---
Miguel
