I just installed 3.8 on a server that never had OpenBSD on it. Whenever I reboot, I get a warning that / wasn't unmounted properly. This is followed by an fsck of / and bootup goes on as normal. All other filesystems are clean.
I've tried reboot, halt, even sync sync sync reboot. The bootup sequence still shows that / wasn't unmounted properly. Am I doing something wrong? Is there anything that can be done to deal with this? OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 399 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX, FXSR real mem = 267952128 (261672K) avail mem = 237613056 (232044K) using 3296 buffers containing 13500416 bytes (13184K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(62) BIOS, date 08/07/00, BIOS32 rev. 0 @ 0xfd83c pcibios0 at bios0: rev 2.1 @ 0xfd740/0x8c0 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf40/160 (8 entries) pcibios0: PCI Exclusive IRQs: 9 pcibios0: PCI Interrupt Router at 000:04:0 ("Intel 82371FB ISA" rev 0x00) pcibios0: PCI bus #2 is the last bus bios0: ROM list: 0xc0000/0x8000 0xc8000/0x800 0xc8800/0x1000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82443BX" rev 0x03 pcib0 at pci0 dev 4 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02 pciide0 at pci0 dev 4 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 1.5A> SCSI0 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, DMA mode 2 pciide0: channel 1 ignored (disabled) uhci0 at pci0 dev 4 function 2 "Intel 82371AB USB" rev 0x01: irq 11 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered "Intel 82371AB Power" rev 0x02 at pci0 dev 4 function 3 not configured ppb0 at pci0 dev 7 function 0 "DEC 21152 PCI-PCI" rev 0x03 pci1 at ppb0 bus 1 fxp0 at pci1 dev 3 function 0 "Intel 82557" rev 0x05, i82558: irq 11, address 00:90:27:87:61:16 inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 0 siop0 at pci1 dev 4 function 0 "Symbios Logic 53c895" rev 0x01: irq 15, using 4K of on-board RAM scsibus1 at siop0siop0: switching to single-ended mode : 16 targets ppb1 at pci0 dev 9 function 0 "Intel i960 RP PCI-PCI" rev 0x03 pci2 at ppb1 bus 2 ami0 at pci0 dev 9 function 1 "Intel 80960RP ATU" rev 0x03: irq 10 HP 438/32b ami0: FW C.02.08, BIOS vB.02.04, 16MB RAM ami0: 3 channels, 16 targets, 1 logical drives scsibus2 at ami0: 1 targets sd0 at scsibus2 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed sd0: 4066MB, 518 cyl, 255 head, 63 sec, 512 bytes/sec, 8327168 sec total scsibus3 at ami0: 16 targets scsibus4 at ami0: 16 targets scsibus5 at ami0: 16 targets vga1 at pci0 dev 13 function 0 "Cirrus Logic CL-GD5446" rev 0x45 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 sysbeep0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask ef65 netmask ef65 ttymask ffe7 pctr: 686-class user-level performance counters enabled mtrr: Pentium Pro MTRR support dkcsum: sd0 matches BIOS drive 0x80 root on sd0a rootdev=0x400 rrootdev=0xd00 rawdev=0xd02 WARNING: / was not properly unmounted