I've just finished setting up two virtual machines with OB 5.1 current
snapshot.
When I enable pfsync I get the following:
carp: pfsync0 demoted group carp by 1 to 1 (pfsync bulk start)
carp: pfsync0 demoted group pfsync by 1 to 1 (pfsync bulk start)
carp: pfsync0 demoted group carp by -1 to 0 (pfsync bulk done)
carp: pfsync0 demoted group pfsync by -1 to 0 (pfsync bulk done)
uvm_fault(0xd0a2f1a0, 0x0, 0, 1) -> e
kernel: page fault trap, code=0
Stopped at m_cluncount+0x1a: movzwl 0x12(%edx),%eax
ddb> ddb> ddb> ddb> ddb> m_cluncount(d6daf300,1,0,800,2) at m_cluncount+0x1a
em_rxeof(d1ddd000,ffffffff,c0,f53b7f14,d057c157) at em_rxeof+0x1fe
em_intr(d1ddd000) at em_intr+0x140
Xintr_ioapic2() at Xintr_ioapic2+0x70
--- interrupt ---
cpu_idle_cycle(d0aeafa0) at cpu_idle_cycle+0xf
Bad frame pointer: 0xd0ba1e28
ps
* 3 0 0 0 7 0x40100200 idle0
uvm_fault(0xd0a2f1a0, 0x0, 0, 1) -> e
kernel: page fault trap, code=0
Faulted in DDB; continuing...
ddb> rebooting...
OpenBSD 5.1-current (GENERIC) #210: Thu Apr 26 01:36:40 MDT 2012
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II ("GenuineIntel" 686-class) 2.93 GHz
cpu0:
FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,PGE,CMOV,MMX,FXSR,SSE,SSE2,SSE3,POPCNT
real mem = 1073266688 (1023MB)
avail mem = 1044905984 (996MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/23/99, BIOS32 rev. 0 @ 0xff046,
SMBIOS rev. 2.4 @ 0x3ffffec0 (10 entries)
bios0: vendor Seabios version "0.5.1" date 01/01/2007
bios0: Red Hat KVM
acpi0 at bios0: rev 0
acpi0: sleep states S5
acpi0: tables DSDT FACP SSDT APIC
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 1000MHz
mpbios0: bus 0 is type PCI
mpbios0: bus 1 is type ISA
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 11, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
bios0: ROM list: 0xc0000/0x8c00 0xc9000/0x800 0xc9800/0x800 0xca000/0x2200
vmt0 at mainbus0
vmware: open failed, eax=564d5868, ecx=0000001e, edx=00005658
vmt0: failed to open backdoor RPC channel (TCLO protocol)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00
pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <QEMU HARDDISK>
wd0: 16-sector PIO, LBA48, 12288MB, 25165824 sectors
wd0(pciide0:0:0): using PIO mode 0, DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 0.12> ATAPI 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 0
uhci0 at pci0 dev 1 function 2 "Intel 82371SB USB" rev 0x01: apic 1 int 11
piixpm0 at pci0 dev 1 function 3 "Intel 82371AB Power" rev 0x03: apic 1
int 9
iic0 at piixpm0
iic0: addr 0x19 3e=00 48=00 4a=00 4e=00 fc=00 fe=00 words 00=0000
01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x1b 3e=00 48=00 4a=00 4e=00 fc=00 fe=00 words 00=0000
01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x1c 0f=00 3e=00 48=00 4a=00 4e=00 fc=00 fe=00 words 00=0000
01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x1d 0f=00 3e=00 48=00 4a=00 4e=00 fc=00 fe=00 words 00=0000
01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x1e 3e=00 48=00 4a=00 4e=00 fc=00 fe=00 words 00=0000
01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x1f 3e=00 48=00 4a=00 4e=00 fc=00 fe=00 words 00=0000
01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x29 00=d0 01=d0 02=d0 03=d0 04=d0 05=d0 06=d0 07=d0 08=d0
words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x2b 00=d0 01=d0 02=d0 03=d0 04=d0 05=d0 06=d0 07=d0 08=d0
words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x4c 00=d0 01=d0 02=d0 03=d0 04=d0 05=d0 06=d0 07=d0 08=d0
words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x4e 00=d0 01=d0 02=d0 03=d0 04=d0 05=d0 06=d0 07=d0 08=d0
words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
vga1 at pci0 dev 2 function 0 "Cirrus Logic CL-GD5446" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em0 at pci0 dev 3 function 0 "Intel PRO/1000MT (82540EM)" rev 0x03: apic
1 int 11, address 52:54:00:04:6a:67
em1 at pci0 dev 4 function 0 "Intel PRO/1000MT (82540EM)" rev 0x03: apic
1 int 11, address 52:54:00:7b:ce:15
"Qumranet Virtio Memory" rev 0x00 at pci0 dev 5 function 0 not configured
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: probed fifo depth: 0 bytes
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: density unknown
fd1 at fdc0 drive 1: density unknown
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
nvram: invalid checksum
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (05f2e5d2776402b4.a) swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
clock: unknown CMOS layout
carp0: state transition: BACKUP -> MASTER
Giannis
