On Tue, Nov 01, 2005 at 12:03:25AM -0500, Brad wrote: > A heads up to any macppc users. > > -current now has 3 new audio drivers for macppc. aoa(4), daca(4) > and tumbler(4). If you have a macppc system which currently does > not have supported built-in audio; then I would ask that you please > try out the latest snapshot at > > ftp://ftp.openbsd.org/pub/OpenBSD/snapshots/macppc
I'm very bad at following instructions, so I didn't do this. But I did compile my sources from the -current and tumbler gets detected. > to find out if any of the 3 drivers listed above are at least detected. > there is no guarentee the driver will work once detected. there is > one known defect so far, and that is that with the tumbler driver at > the moment there is an issue with the i2s code which prevents the driver > from working on some iBook laptops. I would very much encourage as many I have an iBook and that's pretty well what I'm seeing. Every time I try to play an MP3 I get the following message on console: i2s_set_rate: timeout > users as possible to try out this snapshot to get a wide range of testers > for the audio drivers. I would also ask that you please send a dmesg > from your system to the list if you have do have the appropriate audio > hardware and mention whether it works or not and any other details. Below is my dmesg: OpenBSD 3.8-current (GENERIC) #0: Sun Nov 6 00:53:29 CET 2005 [EMAIL PROTECTED]:/sys/arch/macppc/compile/GENERIC real mem = 134217728 (131072K) avail mem = 112095232 (109468K) using 1254 buffers containing 6709248 bytes of memory mainbus0 (root): model PowerBook4,1 cpu0 at mainbus0: 750 (Revision 0x2214): 499 MHz: 256KB backside cache memc0 at mainbus0: uni-n mpcpcibr0 at mainbus0 pci: uni-north, Revision 0xff find_node_intr unable to find step size pci0 at mpcpcibr0 bus 0 pchb0 at pci0 dev 11 function 0 "Apple Pangea AGP" rev 0x00 vgafb0 at pci0 dev 16 function 0 "ATI Mobility M3" rev 0x02, mmio wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation) mpcpcibr1 at mainbus0 pci: uni-north, Revision 0x0 pci1 at mpcpcibr1 bus 0 pchb1 at pci1 dev 11 function 0 "Apple Pangea" rev 0x00 macobio0 at pci1 dev 23 function 0 "Apple Pangea Macio" rev 0x00 openpic0 at macobio0: version 0x4614 macgpio0 at macobio0 macgpio1 at macgpio0 irq 47 zsc0 at macobio0: irq 22,23 zstty0 at zsc0 channel 0 zstty1 at zsc0 channel 1 tumbler0 at macobio0: irq 30,1,2 adb0 at macobio0 irq 25: via-pmu, 3 targets aed0 at adb0 addr 0: ADB Event device akbd0 at adb0 addr 2: PowerBook G4 keyboard (Inverted T) wskbd0 at akbd0: console keyboard, using wsdisplay0 ams0 at adb0 addr 3: EMP trackpad <tpad> 2-button, 400 dpi wsmouse0 at ams0 mux 0 abtn0 at adb0 addr 7: brightness/volume/eject buttons apm0 at adb0: battery flags 0x5, 99% charged ki2c0 at macobio0 wdc0 at macobio0 irq 19: DMA wd0 at wdc0 channel 0 drive 0: <IBM-IC25N015ATDA04-0> wd0: 16-sector PIO, LBA, 14403MB, 29498112 sectors wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4 audio0 at tumbler0 ohci0 at pci1 dev 24 function 0 "Apple Pangea USB" rev 0x00: irq 27, version 1.0 usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: Apple OHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ohci1 at pci1 dev 25 function 0 "Apple Pangea USB" rev 0x00: irq 28, version 1.0 usb1 at ohci1: USB revision 1.0 uhub1 at usb1 uhub1: Apple OHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered mpcpcibr2 at mainbus0 pci: uni-north, Revision 0x16 pci2 at mpcpcibr2 bus 0 pchb2 at pci2 dev 11 function 0 "Apple Pangea PCI" rev 0x00 "Apple Pangea FireWire" rev 0x00 at pci2 dev 14 function 0 not configured gem0 at pci2 dev 15 function 0 "Apple Pangea GMAC" rev 0x00: irq 41, address 00:03:93:14:3f:be bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 3 uplcom0 at uhub1 port 1 uplcom0: ATEN International Serial, rev 1.10/0.01, addr 2 ucom0 at uplcom0 bootpath: '/[EMAIL PROTECTED]/ethernet/bsd' boot device: gem0. nfs_boot: using network interface 'gem0' nfs_boot: client_addr=172.16.2.255 nfs_boot: server_addr=172.16.2.2 hostname=triton root on 172.16.2.2:/usr/triton/root swap on 172.16.2.2:/usr/triton/swap wd0(wdc0:0:0): timeout type: ata c_bcount: 0 c_skip: 0 i2s_set_rate: timeout i2s_set_rate: timeout i2s_set_rate: timeout i2s_set_rate: timeout i2s_set_rate: timeout