hi there,
following the fiasco with the acer aspire one D270 netbook,
that comes with the open source hater intel GMA3600 integrated
graphics adapter, i sold off the machine and bought a couple
of generations older levno ideapad s 100 that comes with
Atom N570 / GMA3100 that is supported by the X intel driver.
thanks intel.
this is also a quite nice machine, also its 6 cell battery is
noticably bigger then the acer's.
the wifi does not work, it is the Realtek 8188CE, but still
much better than broadcom. at least here is a chance it will
supported one day.
the disk seems to fall asleep very early all the time, so i will
have to play with atactl to see if i can stop this annoying issue.
it makes clacking sounds.
havent tried the card reader yet.
suspend works, resume almost works, the keyboard stops responding.
one problem i am trying to track down is a constant load over 1.00
i know load is "just a number", but i something is strange.
a screenshot of top:
load averages: 1.06, 1.11, 1.08
47 processes: 46 idle, 1 on processor
CPU0 states: 0.0% user, 0.0% nice, 0.0% system, 0.0% interrupt, 100% idle
CPU1 states: 0.2% user, 0.0% nice, 0.0% system, 0.0% interrupt, 99.8% idle
CPU2 states: 0.0% user, 0.0% nice, 0.0% system, 0.0% interrupt, 100% idle
CPU3 states: 0.0% user, 0.0% nice, 0.0% system, 0.0% interrupt, 100% idle
Memory: Real: 53M/145M act/tot Free: 841M Cache: 53M Swap: 0K/1255M
all CPU's are idle, there are no interrupts.
$ vmstat -i
interrupt total rate
irq0/clock 1460478 380
irq0/ipi 208864 54
irq130/acpi0 735 0
irq81/inteldrm0 39389 10
irq160/azalia0 306 0
irq81/ppb0 1 0
irq81/re0 15953 4
irq82/ppb1 1 0
irq84/uhci1 23 0
irq85/ehci0 421 0
irq80/ahci0 92555 24
irq129/pckbc0 1479 0
irq131/pckbc0 4062 1
Total 1824267 475
right after booting up the load is 0.30 but then
it goes up over 1 and stays there.
$ sysctl hw
hw.machine=i386
hw.model=Intel(R) Atom(TM) CPU N570 @ 1.66GHz ("GenuineIntel" 686-class)
hw.ncpu=4
hw.byteorder=1234
hw.pagesize=4096
hw.disknames=sd0:65714a12cd3919f3,sd1:b4b151eed846a7ef,sd2:
hw.diskcount=3
hw.sensors.acpiac0.indicator0=Off (power supply)
hw.sensors.acpibat0.volt0=10.80 VDC (voltage)
hw.sensors.acpibat0.volt1=10.64 VDC (current voltage)
hw.sensors.acpibat0.current0=1.02 A (rate)
hw.sensors.acpibat0.amphour0=4.43 Ah (last full capacity)
hw.sensors.acpibat0.amphour1=0.44 Ah (warning capacity)
hw.sensors.acpibat0.amphour2=0.22 Ah (low capacity)
hw.sensors.acpibat0.amphour3=1.33 Ah (remaining capacity), OK
hw.sensors.acpibat0.raw0=1 (battery discharging), OK
hw.sensors.cpu0.temp0=57.00 degC
hw.cpuspeed=1000
hw.setperf=0
hw.vendor=LENOVO
hw.product=20109
hw.version=Ideapad S100
hw.uuid=8041e87f-cf0f-e141-0dae-fd5a14c99287
hw.physmem=1061818368
hw.usermem=1051213824
hw.ncpufound=4
hw.allowpowerdown=1
dmesg:
OpenBSD 5.1-current (GENERIC.MP) #277: Tue Jun 12 18:40:02 MDT 2012
t...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Atom(TM) CPU N570 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF
real mem = 1061818368 (1012MB)
avail mem = 1033613312 (985MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/31/10, SMBIOS rev. 2.6 @ 0xeb0f0 (53
entries)
bios0: vendor LENOVO version "50CN12WW" date 04/22/2011
bios0: LENOVO 20109
acpi0 at bios0: rev 3
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG SLIC HPET
acpi0: wakeup devices P0P8(S4) PS2K(S3) PS2M(S3) EUSB(S3) P0PA(S4) P0PB(S4)
P0PC(S4) P0P9(S3) USB0(S3) USB1(S3) USB2(S3) USB3(S3) PWRB(S3) SLPB(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU N570 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Atom(TM) CPU N570 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Atom(TM) CPU N570 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (P0P8)
acpiprt2 at acpi0: bus 2 (P0PA)
acpiprt3 at acpi0: bus -1 (P0PB)
acpiprt4 at acpi0: bus -1 (P0PC)
acpiprt5 at acpi0: bus 1 (P0P9)
acpiec0 at acpi0
acpicpu0 at acpi0:, C3, C2, C1, PSS
acpicpu1 at acpi0:, C3, C2, C1, PSS
acpicpu2 at acpi0:, C3, C2, C1, PSS
acpicpu3 at acpi0:, C3, C2, C1, PSS
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: LID_
acpiac0 at acpi0: AC unit offline
acpibat0 at acpi0: BAT1 model "LNV-L10C6Y12" serial 004706 type LiIon
oem "CPT-ES3"
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD02
bios0: ROM list: 0xc0000/0xda00! 0xce000/0x1000
cpu0: Enhanced SpeedStep 1663 MHz: speeds: 1667, 1334, 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 4 int 16
drm0 at inteldrm0
"Intel Pineview Video" rev 0x02 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4 int 16
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8101E" rev 0x05: RTL8105E (0x4080), apic
4 int 16, address 50:af:73:14:da:b5
ukphy0 at re0 phy 7: Generic IEEE 802.3u media interface, rev. 2: OUI 0x000732,
model 0x0008
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 4 int 17
pci2 at ppb1 bus 2
"Realtek 8188CE" rev 0x01 at pci2 dev 0 function 0 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci3 at ppb2 bus 3
pcib0 at pci0 dev 31 function 0 "Intel Tigerpoint LPC" rev 0x02
ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x02: msi, AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, HITACHI HTS54323, ES2Z> SCSI3 0/direct
fixed naa.5000cca6c7d0d37f
sd0: 305245MB, 512 bytes/sector, 625142448 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 4 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR3 SDRAM PC3-10600 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 1 configuration 1 interface 0 "Generic USB2.0-CRW" rev
2.00/19.81 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <Generic-, SD/MMC, 1.00> SCSI0 0/direct removable
serial.0bda0119815198100000
sd1: 15096MB, 512 bytes/sector, 30916608 sectors
umass1 at uhub0 port 5 configuration 1 interface 0 "Generic USB2.0-CRW" rev
2.00/38.82 addr 3
umass1: using SCSI over Bulk-Only
scsibus2 at umass1: 2 targets, initiator 0
sd2 at scsibus2 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0 0/direct
removable serial.0bda0138516388200000
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Lenovo Lenovo EasyCamera"
rev 2.00/10.22 addr 4
video0 at uvideo0
ugen0 at uhub2 port 2 "Cambridge Silicon Radio Bluetooth" rev 2.00/52.76 addr 2
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (65714a12cd3919f3.a) swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
--
dos tip: don't use dos.
