I have a Pentium III system running 5.1 current with athn(4) hostap power
saving patches or 5.2 current. It has the slightly unusual configuration of
an ISA video card (X not used) and a 64 bit PCI NIC hacked to run in a 32
bit slot, but is otherwise a bog standard desktop. It's running flashrd due
to using an IDE to compact flash adaptor.
5.1 release is entirely stable (it may have hung once, perhaps, in months
of operation).
Once I put on 5.2 current (from a few days ago) or 5.1 stable with the
latest athn patches the system hangs hard, in around 20 minutes to an hour.
No response from network, console or anything suspicious in the log if I
leave a tail -f /var/log/messages running. I suspect the athn patches
aren't the problem, but they're the whole reason I'm trying to patch the
firewall.
I can try other hardware on a temporary basis, but what's the best method
of diagnosing failure/possible things to try? Yes, flashrd does run a
custom kernel, but the differences aren't that major and 5.1 release is
reliable.
dmesg :
OpenBSD 5.1-stable (FLASHRD) #0: Mon Sep 3 04:52:51 BST 2012
r...@fwbuilder.syllopsium.com:/usr/src/sys/arch/i386/compile/FLASHRD
cpu0: Intel Pentium III ("GenuineIntel" 686-class, 512KB L2 cache) 502 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PSE36,MMX,FXSR,SSE
real mem = 267907072 (255MB)
avail mem = 250122240 (238MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/23/99, BIOS32 rev. 0 @ 0xfb220,
SMBIOS rev. 2.2 @ 0xf0800 (34 entries)
bios0: vendor Award Software International, Inc. version
"HW.27.04(QHW.04.00)" date 04/23/1999
bios0: Hewlett-Packard HP Vectra
apm0 at bios0: Power Management spec V1.2 (slowidle)
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb6a0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf00/144 (7 entries)
pcibios0: PCI Exclusive IRQs: 3 10 11 15
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371SB ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xe0000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
clcs0 at pci0 dev 4 function 0 "Cirrus Logic CS4280/46xx CrystalClear" rev
0x01: irq 3
ac97: codec id 0x43525903 (Cirrus Logic CS4297 rev 3)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, No 3D Stereo
piixpcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <CF Card>
wd0: 1-sector PIO, LBA, 961MB, 1969632 sectors
wd0(pciide0:0:0): using PIO mode 4
pciide0: channel 1 ignored (disabled)
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 15
piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x02: polling
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 128MB SDRAM non-parity PC100CL3
spdmem1 at iic0 addr 0x51: 128MB SDRAM non-parity PC133CL3
athn0 at pci0 dev 15 function 0 "Atheros AR5416" rev 0x01: irq 11
athn0: MAC AR5416 rev 2, RF AR2133 (3T2R), ROM rev 5, address
b0:48:7a:ec:9f:34
ppb1 at pci0 dev 16 function 0 "DEC 21154 PCI-PCI" rev 0x02
pci2 at ppb1 bus 2
fxp0 at pci2 dev 4 function 0 "Intel 8255x" rev 0x05, i82558: irq 3,
address 00:08:c7:91:b5:2a
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 0
fxp1 at pci2 dev 5 function 0 "Intel 8255x" rev 0x05, i82558: irq 10,
address 00:08:c7:91:b5:2b
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 0
isa0 at piixpcib0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072
wsdisplay0 at vga0 mux 1: console (80x25, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
cannot support dma lance devices
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
scsibus1 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
clcs0: image download error
WARNING: /flash was not properly unmounted
Thanks for any help
Peter
