On Jun 13 14:12:45, h...@stare.cz wrote: > This is current/macppc on a "late 2005" Mac Mini, > which is PowerMac10,2. > > I needed to hardcode the root device into the kernel config, > otherwise boot stops with unknown root device, as discussed > in the misc thread that starts at > http://marc.info/?l=openbsd-misc&m=133932614509618&w=2 > - probably a discrepancy in what ofw passes to the kernel.
Just upgraded to a current again, with the same problem, and the same solution: Index: GENERIC =================================================================== RCS file: /cvs/src/sys/arch/macppc/conf/GENERIC,v retrieving revision 1.216 diff -u -p -r1.216 GENERIC --- GENERIC 4 Dec 2012 10:58:05 -0000 1.216 +++ GENERIC 26 Dec 2012 14:46:06 -0000 @@ -27,7 +27,7 @@ option WSDISPLAY_COMPAT_RAWKBD # provid option USER_PCICONF # user-space PCI configuration -config bsd swap generic +config bsd root on wd0a mainbus0 at root cpu* at mainbus0 [ using 501892 bytes of bsd ELF symbol table ] console out [ATY,RockHopper2_A]console in [keyboard] , using USB using parent ATY,RockHopper2Paren:: memaddr 98000000 size 8000000, : consaddr 9c008000, : ioaddr 90020000, size 20000: memtag 8000, iotag 8000: width 800 linebytes 1024 height 600 depth 8 Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2012 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 5.2-current (GENERIC.MP) #4: Wed Dec 26 15:08:07 CET 2012 r...@www.stare.cz:/usr/src/sys/arch/macppc/compile/GENERIC.MP real mem = 1073741824 (1024MB) avail mem = 1032146944 (984MB) mainbus0 at root: model PowerMac10,2 cpu0 at mainbus0: 7447A (Revision 0x102): 1499 MHz: 512KB L2 cache mem0 at mainbus0 spdmem0 at mem0: 1GB DDR SDRAM non-parity PC3200CL3.0 memc0 at mainbus0: uni-n rev 0xd2 "hw-clock" at memc0 not configured kiic0 at memc0 offset 0xf8001000 iic0 at kiic0 mpcpcibr0 at mainbus0 pci: uni-north, Revision 0xff pci0 at mpcpcibr0 bus 0 pchb0 at pci0 dev 11 function 0 "Apple UniNorth AGP" rev 0x00 appleagp0 at pchb0 agp0 at appleagp0: aperture at 0x0, size 0x10000000 vgafb0 at pci0 dev 16 function 0 "ATI Radeon 9200" rev 0x01, mmio wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation) mpcpcibr1 at mainbus0 pci: uni-north, Revision 0x5 pci1 at mpcpcibr1 bus 0 pchb1 at pci1 dev 11 function 0 "Apple UniNorth PCI" rev 0x00 bwi0 at pci1 dev 18 function 0 "Broadcom BCM4318" rev 0x02: irq 52, address 00:11:24:bf:cb:2a macobio0 at pci1 dev 23 function 0 "Apple Intrepid" rev 0x00 openpic0 at macobio0 offset 0x40000: version 0x4614 feature 3f0302 LE macgpio0 at macobio0 offset 0x50 "modem-reset" at macgpio0 offset 0x1d not configured "modem-power" at macgpio0 offset 0x1c not configured macgpio1 at macgpio0 offset 0x9 irq 47 "programmer-switch" at macgpio0 offset 0x11 not configured "gpio5" at macgpio0 offset 0x6f not configured "gpio6" at macgpio0 offset 0x70 not configured "extint-gpio15" at macgpio0 offset 0x67 not configured "escc-legacy" at macobio0 offset 0x12000 not configured zsc0 at macobio0 offset 0x13000: irq 22,23 zstty0 at zsc0 channel 0 zstty1 at zsc0 channel 1 aoa0 at macobio0 offset 0x10000: irq 30,1,2 audio0 at aoa0 "timer" at macobio0 offset 0x15000 not configured adb0 at macobio0 offset 0x16000 irq 25: via-pmu, 0 targets apm0 at adb0: battery flags 0x0, 0% charged piic0 at adb0 iic1 at piic0 maxtmp0 at iic1 addr 0xc8: max6642 kiic1 at macobio0 offset 0x18000 iic2 at kiic1 wdc0 at macobio0 offset 0x20000 irq 24: DMA ohci0 at pci1 dev 24 function 0 "Apple Intrepid USB" rev 0x00: couldn't map interrupt ohci1 at pci1 dev 25 function 0 "Apple Intrepid USB" rev 0x00: couldn't map interrupt ohci2 at pci1 dev 26 function 0 "Apple Intrepid USB" rev 0x00: irq 29, version 1.0, legacy support ohci3 at pci1 dev 27 function 0 "NEC USB" rev 0x43: irq 63, version 1.0 ohci4 at pci1 dev 27 function 1 "NEC USB" rev 0x43: irq 63, version 1.0 ehci0 at pci1 dev 27 function 2 "NEC USB" rev 0x04: irq 63 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1 usb1 at ohci2: USB revision 1.0 uhub1 at usb1 "Apple OHCI root hub" rev 1.00/1.00 addr 1 usb2 at ohci3: USB revision 1.0 uhub2 at usb2 "NEC OHCI root hub" rev 1.00/1.00 addr 1 usb3 at ohci4: USB revision 1.0 uhub3 at usb3 "NEC OHCI root hub" rev 1.00/1.00 addr 1 mpcpcibr2 at mainbus0 pci: uni-north, Revision 0x6 pci2 at mpcpcibr2 bus 0 pchb2 at pci2 dev 11 function 0 "Apple UniNorth PCI" rev 0x00 kauaiata0 at pci2 dev 13 function 0 "Apple Intrepid ATA" rev 0x00 wdc1 at kauaiata0 irq 39: DMA atapiscsi0 at wdc1 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-R UJ-825, DAND> ATAPI 5/cdrom removable wd0 at wdc1 channel 0 drive 1: <ST9808211A> wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors cd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4 wd0(wdc1:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4 "Apple UniNorth Firewire" rev 0x81 at pci2 dev 14 function 0 not configured gem0 at pci2 dev 15 function 0 "Apple Uni-N2 GMAC" rev 0x80: irq 41, address 00:14:51:17:42:34 bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 4 umass0 at uhub0 port 1 configuration 1 interface 0 "Prolific Technology Inc. Mass Storage Device" rev 2.00/1.00 addr 2 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets, initiator 0 sd0 at scsibus1 targ 1 lun 0: <ST980815, A, 3.AL> SCSI0 0/direct fixed serial.067b2506000000000000 sd0: 76319MB, 512 bytes/sector, 156301488 sectors uhidev0 at uhub1 port 1 configuration 1 interface 0 "Apple Computer HID-proxy" rev 2.00/19.65 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd0 at ukbd0: console keyboard, using wsdisplay0 uhidev1 at uhub1 port 1 configuration 1 interface 1 "Apple Computer HID-proxy" rev 2.00/19.65 addr 2 uhidev1: iclass 3/1 ums0 at uhidev1: 5 buttons wsmouse0 at ums0 mux 0 uhidev2 at uhub3 port 1 configuration 1 interface 0 "Chicony USB Keyboard" rev 1.10/1.02 addr 2 uhidev2: iclass 3/1 ukbd1 at uhidev2: 8 variable keys, 6 key codes wskbd1 at ukbd1 mux 1 wskbd1: connecting to wsdisplay0 uhidev3 at uhub3 port 1 configuration 1 interface 1 "Chicony USB Keyboard" rev 1.10/1.02 addr 2 uhidev3: iclass 3/0, 3 report ids uhid0 at uhidev3 reportid 1: input=1, output=0, feature=0 uhid1 at uhidev3 reportid 2: input=1, output=0, feature=2 uhid2 at uhidev3 reportid 3: input=3, output=0, feature=0 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets bootpath: /pci@f4000000/ata-6@d/disk@1:/bsd root on wd0a swap on wd0b dump on wd0b