On Tue, 15 Jan 2013 11:33:54 +0100, Stefan Sperling wrote: >On Tue, Jan 15, 2013 at 04:35:24PM +1100, Rod Whitworth wrote: >> E installs without whining. >> >> I changed xinitrc to remove the icewm setting and added:- >> exec enlightenment_start >> >> startx gives a very dark screen and a mouse cursor pops up in the >> centre. Then the screen has a short flash of white all over before the >> dark screen comes back without the mouse cursor. > >Hmmm... no idea what the problem could be. Sounds like the X server >is crashing. Please show /var/log/Xorg.0.log, too.
Here it is: ===== [ 206.914] (--) checkDevMem: using aperture driver /dev/xf86 [ 206.927] (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode (version 3.32) [ 208.018] X.Org X Server 1.12.2 Release Date: 2012-05-29 [ 208.018] X Protocol Version 11, Revision 0 [ 208.018] Build Operating System: OpenBSD 5.2 i386 [ 208.018] Current Operating System: OpenBSD red.witworx.com 5.2 GENERIC.MP#339 i386 [ 208.018] Build Date: 22 July 2012 10:21:16PM [ 208.018] [ 208.018] Current version of pixman: 0.24.4 [ 208.019] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 208.019] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 208.019] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 16 10:12:12 2013 [ 208.074] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d" [ 208.083] (==) No Layout section. Using the first Screen section. [ 208.084] (==) No screen section available. Using defaults. [ 208.084] (**) |-->Screen "Default Screen Section" (0) [ 208.084] (**) | |-->Monitor "<default monitor>" [ 208.084] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 208.084] (==) Disabling SIGIO handlers for input devices [ 208.084] (==) Automatically adding devices [ 208.084] (==) Automatically enabling devices [ 208.249] (==) FontPath set to: /usr/X11R6/lib/X11/fonts/misc/, /usr/X11R6/lib/X11/fonts/TTF/, /usr/X11R6/lib/X11/fonts/OTF/, /usr/X11R6/lib/X11/fonts/Type1/, /usr/X11R6/lib/X11/fonts/100dpi/, /usr/X11R6/lib/X11/fonts/75dpi/ [ 208.249] (==) ModulePath set to "/usr/X11R6/lib/modules" [ 208.249] (II) The server relies on wscons to provide the list of input devices. If no devices become available, reconfigure wscons or disable AutoAddDevices. [ 208.261] (II) Loader magic: 0x3c021020 [ 208.261] (II) Module ABI versions: [ 208.261] X.Org ANSI C Emulation: 0.4 [ 208.261] X.Org Video Driver: 12.0 [ 208.261] X.Org XInput driver : 16.0 [ 208.261] X.Org Server Extension : 6.0 [ 208.263] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21ee rev 9, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00004000/64 [ 208.263] (II) LoadModule: "extmod" [ 208.291] (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so [ 208.301] (II) Module extmod: vendor="X.Org Foundation" [ 208.301] compiled for 1.12.2, module version = 1.0.0 [ 208.301] Module class: X.Org Server Extension [ 208.301] ABI class: X.Org Server Extension, version 6.0 [ 208.301] (II) Loading extension MIT-SCREEN-SAVER [ 208.301] (II) Loading extension XFree86-VidModeExtension [ 208.301] (II) Loading extension XFree86-DGA [ 208.301] (II) Loading extension DPMS [ 208.301] (II) Loading extension XVideo [ 208.301] (II) Loading extension XVideo-MotionCompensation [ 208.301] (II) Loading extension X-Resource [ 208.301] (II) LoadModule: "dbe" [ 208.302] (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so [ 208.309] (II) Module dbe: vendor="X.Org Foundation" [ 208.309] compiled for 1.12.2, module version = 1.0.0 [ 208.309] Module class: X.Org Server Extension [ 208.309] ABI class: X.Org Server Extension, version 6.0 [ 208.309] (II) Loading extension DOUBLE-BUFFER [ 208.309] (II) LoadModule: "glx" [ 208.309] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so [ 208.320] (II) Module glx: vendor="X.Org Foundation" [ 208.320] compiled for 1.12.2, module version = 1.0.0 [ 208.320] ABI class: X.Org Server Extension, version 6.0 [ 208.320] (==) AIGLX enabled [ 208.321] (II) Loading extension GLX [ 208.321] (II) LoadModule: "record" [ 208.321] (II) Loading /usr/X11R6/lib/modules/extensions/librecord.so [ 208.322] (II) Module record: vendor="X.Org Foundation" [ 208.322] compiled for 1.12.2, module version = 1.13.0 [ 208.322] Module class: X.Org Server Extension [ 208.322] ABI class: X.Org Server Extension, version 6.0 [ 208.322] (II) Loading extension RECORD [ 208.322] (II) LoadModule: "dri" [ 208.322] (II) Loading /usr/X11R6/lib/modules/extensions/libdri.so [ 208.344] (II) Module dri: vendor="X.Org Foundation" [ 208.344] compiled for 1.12.2, module version = 1.0.0 [ 208.344] ABI class: X.Org Server Extension, version 6.0 [ 208.344] (II) Loading extension XFree86-DRI [ 208.344] (II) LoadModule: "dri2" [ 208.345] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so [ 208.345] (II) Module dri2: vendor="X.Org Foundation" [ 208.345] compiled for 1.12.2, module version = 1.2.0 [ 208.345] ABI class: X.Org Server Extension, version 6.0 [ 208.345] (II) Loading extension DRI2 [ 208.352] (==) Matched intel as autoconfigured driver 0 [ 208.352] (==) Matched vesa as autoconfigured driver 1 [ 208.352] (==) Assigned the driver to the xf86ConfigLayout [ 208.352] (II) LoadModule: "intel" [ 208.353] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so [ 208.380] (II) Module intel: vendor="X.Org Foundation" [ 208.380] compiled for 1.12.2, module version = 2.12.0 [ 208.380] Module class: X.Org Video Driver [ 208.380] ABI class: X.Org Video Driver, version 12.0 [ 208.381] (II) LoadModule: "vesa" [ 208.381] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so [ 208.391] (II) Module vesa: vendor="X.Org Foundation" [ 208.391] compiled for 1.12.2, module version = 2.3.1 [ 208.391] Module class: X.Org Video Driver [ 208.391] ABI class: X.Org Video Driver, version 12.0 [ 208.391] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server [ 208.391] (II) VESA: driver for VESA chipsets: vesa [ 208.391] (WW) Falling back to old probe method for vesa [ 208.391] (II) Loading sub module "vgahw" [ 208.391] (II) LoadModule: "vgahw" [ 208.395] (II) Loading /usr/X11R6/lib/modules/libvgahw.so [ 208.408] (II) Module vgahw: vendor="X.Org Foundation" [ 208.408] compiled for 1.12.2, module version = 0.1.0 [ 208.408] ABI class: X.Org Video Driver, version 12.0 [ 208.408] (II) Loading sub module "ramdac" [ 208.408] (II) LoadModule: "ramdac" [ 208.408] (II) Module "ramdac" already built-in [ 208.408] drmOpenDevice: node name is /dev/drm0 [ 208.408] drmOpenDevice: open result is 10, (OK) [ 208.408] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 208.408] drmOpenDevice: node name is /dev/drm0 [ 208.408] drmOpenDevice: open result is 10, (OK) [ 208.408] drmOpenByBusid: drmOpenMinor returns 10 [ 208.408] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 208.408] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 208.408] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 208.408] (==) intel(0): RGB weight 888 [ 208.408] (==) intel(0): Default visual is TrueColor [ 208.409] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+) [ 208.409] (--) intel(0): Chipset: "Sandybridge Mobile (GT2+)" [ 208.409] (--) intel(0): Linear framebuffer at 0xC0000000 [ 208.409] (--) intel(0): IO registers at addr 0xD0000000 size 4194304 [ 208.409] (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB [ 208.409] (II) intel(0): No SDVO device is found in VBT [ 208.410] (II) intel(0): 2 display pipes available. [ 208.410] (II) Loading sub module "ddc" [ 208.410] (II) LoadModule: "ddc" [ 208.410] (II) Module "ddc" already built-in [ 208.410] (II) Loading sub module "i2c" [ 208.410] (II) LoadModule: "i2c" [ 208.410] (II) Module "i2c" already built-in [ 208.410] (II) intel(0): Output VGA has no monitor section [ 208.410] (II) intel(0): Output LVDS has no monitor section [ 208.410] (II) intel(0): I2C bus "LVDSDDC_C" initialized. [ 208.410] (II) intel(0): Attempting to determine panel fixed mode. [ 208.410] (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. [ 208.466] (II) intel(0): EDID for output LVDS [ 208.466] (II) intel(0): Manufacturer: LGD Model: 314 Serial#: 0 [ 208.466] (II) intel(0): Year: 2011 Week: 0 [ 208.466] (II) intel(0): EDID Version: 1.3 [ 208.466] (II) intel(0): Digital Display Input [ 208.466] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16 [ 208.466] (II) intel(0): Gamma: 2.20 [ 208.466] (II) intel(0): No DPMS capabilities specified [ 208.466] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 208.466] (II) intel(0): First detailed timing is preferred mode [ 208.466] (II) intel(0): redX: 0.577 redY: 0.347 greenX: 0.338 greenY: 0.561 [ 208.466] (II) intel(0): blueX: 0.159 blueY: 0.127 whiteX: 0.313 whiteY: 0.329 [ 208.466] (II) intel(0): Manufacturer's mask: 0 [ 208.466] (II) intel(0): Supported detailed timing: [ 208.466] (II) intel(0): clock: 69.7 MHz Image Size: 293 x 165 mm [ 208.466] (II) intel(0): h_active: 1366 h_sync: 1398 h_sync_end 1430 h_blank_end 1478 h_border: 0 [ 208.466] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 786 v_border: 0 [ 208.466] (II) intel(0): LG Display [ 208.466] (II) intel(0): LP133WH2-TLM7 [ 208.466] (II) intel(0): EDID (in hex): [ 208.466] (II) intel(0): 00ffffffffffff0030e4140300000000 [ 208.466] (II) intel(0): 00150103801d10780afae59358568f28 [ 208.466] (II) intel(0): 20505400000001010101010101010101 [ 208.466] (II) intel(0): 0101010101013a1b5670500012302020 [ 208.466] (II) intel(0): 350025a5100000190000000000000000 [ 208.466] (II) intel(0): 00000000000000000000000000fe004c [ 208.466] (II) intel(0): 4720446973706c61790a2020000000fe [ 208.466] (II) intel(0): 004c503133335748322d544c4d3700af [ 208.466] (II) intel(0): EDID vendor "LGD", prod id 788 [ 208.466] (II) intel(0): Output HDMI-3 has no monitor section [ 208.466] (II) intel(0): I2C bus "HDMIB" initialized. [ 208.466] (II) intel(0): HDMI-3 output detected [ 208.500] (II) intel(0): EDID for output VGA [ 208.555] (II) intel(0): EDID for output LVDS [ 208.555] (II) intel(0): Manufacturer: LGD Model: 314 Serial#: 0 [ 208.555] (II) intel(0): Year: 2011 Week: 0 [ 208.555] (II) intel(0): EDID Version: 1.3 [ 208.555] (II) intel(0): Digital Display Input [ 208.555] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16 [ 208.555] (II) intel(0): Gamma: 2.20 [ 208.555] (II) intel(0): No DPMS capabilities specified [ 208.555] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 208.555] (II) intel(0): First detailed timing is preferred mode [ 208.555] (II) intel(0): GTF timings supported [ 208.555] (II) intel(0): redX: 0.577 redY: 0.347 greenX: 0.338 greenY: 0.561 [ 208.555] (II) intel(0): blueX: 0.159 blueY: 0.127 whiteX: 0.313 whiteY: 0.329 [ 208.555] (II) intel(0): Manufacturer's mask: 0 [ 208.555] (II) intel(0): Supported detailed timing: [ 208.555] (II) intel(0): clock: 69.7 MHz Image Size: 293 x 165 mm [ 208.555] (II) intel(0): h_active: 1366 h_sync: 1398 h_sync_end 1430 h_blank_end 1478 h_border: 0 [ 208.555] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 786 v_border: 0 [ 208.555] (II) intel(0): LG Display [ 208.555] (II) intel(0): LP133WH2-TLM7 [ 208.555] (II) intel(0): EDID (in hex): [ 208.555] (II) intel(0): 00ffffffffffff0030e4140300000000 [ 208.555] (II) intel(0): 00150103801d10780afae59358568f28 [ 208.555] (II) intel(0): 20505400000001010101010101010101 [ 208.555] (II) intel(0): 0101010101013a1b5670500012302020 [ 208.555] (II) intel(0): 350025a5100000190000000000000000 [ 208.555] (II) intel(0): 00000000000000000000000000fe004c [ 208.555] (II) intel(0): 4720446973706c61790a2020000000fe [ 208.555] (II) intel(0): 004c503133335748322d544c4d3700af [ 208.555] (II) intel(0): EDID vendor "LGD", prod id 788 [ 208.555] (II) intel(0): Printing probed modes for output LVDS [ 208.555] (II) intel(0): Modeline "1366x768"x60.0 69.70 1366 1398 1430 1478 768 771 776 786 -hsync -vsync (47.2 kHz eP) [ 208.555] (II) intel(0): I2C device "HDMIB:ddc2" registered at address 0xA0. [ 208.559] (II) intel(0): EDID for output HDMI-3 [ 208.559] (II) intel(0): EDID for output HDMI-3 [ 208.559] (II) intel(0): Output VGA disconnected [ 208.559] (II) intel(0): Output LVDS connected [ 208.559] (II) intel(0): Output HDMI-3 disconnected [ 208.559] (II) intel(0): Using exact sizes for initial modes [ 208.559] (II) intel(0): Output LVDS using initial mode 1366x768 [ 208.559] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 208.559] (II) intel(0): detected 512 kB GTT. [ 208.559] (II) intel(0): detected 65532 kB stolen memory. [ 208.559] (==) intel(0): video overlay key set to 0x101fe [ 208.559] (==) intel(0): DPI set to (96, 96) [ 208.559] (II) Loading sub module "fb" [ 208.559] (II) LoadModule: "fb" [ 208.560] (II) Loading /usr/X11R6/lib/modules/libfb.so [ 208.571] (II) Module fb: vendor="X.Org Foundation" [ 208.571] compiled for 1.12.2, module version = 1.0.0 [ 208.571] ABI class: X.Org ANSI C Emulation, version 0.4 [ 208.571] (II) UnloadModule: "vesa" [ 208.571] (II) Unloading vesa [ 208.571] (==) Depth 24 pixmap format is 32 bpp [ 208.585] (II) intel(0): Kernel reported 1006592 total, 0 used [ 208.585] (II) intel(0): I830CheckAvailableMemory: 4026368 kB available [ 208.588] (WW) intel(0): DRI disabled on Sandy Bridge chipsets [ 208.588] (**) intel(0): Shadow buffer enabled, 2D GPU acceleration disabled. [ 208.588] (**) intel(0): Framebuffer tiled [ 208.588] (**) intel(0): Pixmaps tiled [ 208.588] (**) intel(0): 3D buffers tiled [ 208.588] (**) intel(0): SwapBuffers wait enabled [ 208.592] (==) intel(0): VideoRam: 262144 KB [ 208.592] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled [ 208.608] (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03b0 [ 208.626] (II) UXA(0): Driver registered support for the following operations: [ 208.626] (II) solid [ 208.626] (II) copy [ 208.626] (II) composite (RENDER acceleration) [ 208.626] (II) put_image [ 208.626] (II) get_image [ 208.626] (==) intel(0): Backing store disabled [ 208.626] (==) intel(0): Silken mouse disabled [ 208.630] (II) intel(0): Initializing HW Cursor [ 208.890] Plane disable [ 208.930] Pipe disable [ 208.970] PFIT disable [ 208.970] FDI TX disable [ 208.970] FDI RX disable [ 208.990] FDI TX train 1 preload [ 208.990] FDI RX train 1 preload [ 209.010] Transcoder disable [ 209.050] PCH DPLL disable [ 209.050] FDI RX PLL PCD disable [ 209.050] FDI TX PLL disable 001a2040 [ 209.070] FDI RX PLL disable 001c0000 [ 209.090] DPMS off done [ 209.110] Plane disable [ 209.110] Pipe disable [ 209.130] PFIT disable [ 209.130] FDI TX disable [ 209.130] FDI RX disable [ 209.150] FDI TX train 1 preload [ 209.150] FDI RX train 1 preload [ 209.170] LVDS port force off [ 209.170] Transcoder disable [ 209.190] PCH DPLL disable [ 209.190] FDI RX PLL PCD disable [ 209.190] FDI TX PLL disable 00000040 [ 209.210] FDI RX PLL disable 00040000 [ 209.230] DPMS off done [ 209.301] (II) intel(0): Fixed memory allocation layout: [ 209.301] (II) intel(0): 0x03fff000: end of stolen memory [ 209.301] (II) intel(0): 0x03fff000-0x0fffffff: DRI memory manager (196612 kB) [ 209.301] (II) intel(0): 0x10000000: end of aperture [ 209.301] (II) intel(0): BO memory allocation layout: [ 209.301] (II) intel(0): 0x03fff000: start of memory manager [ 209.301] (II) intel(0): 0x04552000-0x0455bfff: HW cursors (40 kB) [ 209.301] (II) intel(0): 0x10000000: end of memory manager [ 209.302] Plane disable [ 209.302] Pipe disable [ 209.320] PFIT disable [ 209.320] FDI TX disable [ 209.320] FDI RX disable [ 209.340] FDI TX train 1 preload [ 209.340] FDI RX train 1 preload [ 209.360] Transcoder disable [ 209.380] PCH DPLL disable [ 209.380] FDI RX PLL PCD disable [ 209.380] FDI TX PLL disable 001a2040 [ 209.400] FDI RX PLL disable 001c0000 [ 209.420] DPMS off done [ 209.440] Plane disable [ 209.440] Pipe disable [ 209.460] PFIT disable [ 209.460] FDI TX disable [ 209.460] FDI RX disable [ 209.480] FDI TX train 1 preload [ 209.480] FDI RX train 1 preload [ 209.500] LVDS port force off [ 209.500] Transcoder disable [ 209.520] PCH DPLL disable [ 209.520] FDI RX PLL PCD disable [ 209.520] FDI TX PLL disable 00000040 [ 209.540] FDI RX PLL disable 00040000 [ 209.560] DPMS off done [ 209.580] Plane disable [ 209.580] Pipe disable [ 209.600] PFIT disable [ 209.600] FDI TX disable [ 209.600] FDI RX disable [ 209.620] FDI TX train 1 preload [ 209.620] FDI RX train 1 preload [ 209.640] LVDS port force off [ 209.640] Transcoder disable [ 209.660] PCH DPLL disable [ 209.660] FDI RX PLL PCD disable [ 209.660] FDI TX PLL disable 00000040 [ 209.680] FDI RX PLL disable 00040000 [ 209.700] DPMS off done [ 209.720] is lvds [ 209.720] (II) intel(0): using SSC reference clock of 120 MHz [ 209.720] bpp 6 [ 209.720] (II) intel(0): Selecting standard 18 bit TMDS pixel format. [ 209.880] PCH FDI RX PLL enable [ 209.920] PCH FDI TX PLL enable 001a2050 [ 209.960] Pipe enable [ 209.980] Plane enable [ 210.040] FDI_RX_IIR 0x100 [ 210.040] FDI train 1 done. [ 210.060] FDI_RX_IIR 0x600 [ 210.060] FDI train 2 done. [ 210.060] FDI train done [ 210.080] FDI TX link normal [ 210.100] transcoder enable [ 210.100] LUT load [ 210.100] DPMS on done [ 210.100] Plane disable [ 210.100] Pipe disable [ 210.120] PFIT disable [ 210.120] FDI TX disable [ 210.120] FDI RX disable [ 210.140] FDI TX train 1 preload [ 210.140] FDI RX train 1 preload [ 210.160] Transcoder disable [ 210.180] PCH DPLL disable [ 210.180] FDI RX PLL PCD disable [ 210.180] FDI TX PLL disable 001a2040 [ 210.200] FDI RX PLL disable 001c0000 [ 210.220] DPMS off done [ 210.240] (II) intel(0): Output configuration: [ 210.240] (II) intel(0): Pipe A is off [ 210.240] (II) intel(0): Display plane A is now disabled and connected to pipe A. [ 210.240] (II) intel(0): Pipe B is on [ 210.240] (II) intel(0): Display plane B is now enabled and connected to pipe B. [ 210.240] (II) intel(0): Output VGA is connected to pipe none [ 210.240] (II) intel(0): Output LVDS is connected to pipe B [ 210.240] (II) intel(0): Output HDMI-3 is connected to pipe none [ 210.240] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 210.286] (==) intel(0): DPMS enabled [ 210.286] (==) intel(0): Intel XvMC decoder enabled [ 210.287] (WW) intel(0): Disabling Xv because no adaptors could be initialized. [ 210.287] (II) intel(0): direct rendering: Failed [ 210.287] (--) RandR disabled [ 210.287] (II) Initializing built-in extension Generic Event Extension [ 210.287] (II) Initializing built-in extension SHAPE [ 210.287] (II) Initializing built-in extension MIT-SHM [ 210.287] (II) Initializing built-in extension XInputExtension [ 210.287] (II) Initializing built-in extension XTEST [ 210.287] (II) Initializing built-in extension BIG-REQUESTS [ 210.287] (II) Initializing built-in extension SYNC [ 210.287] (II) Initializing built-in extension XKEYBOARD [ 210.287] (II) Initializing built-in extension XC-MISC [ 210.287] (II) Initializing built-in extension SECURITY [ 210.287] (II) Initializing built-in extension XINERAMA [ 210.287] (II) Initializing built-in extension XFIXES [ 210.287] (II) Initializing built-in extension RENDER [ 210.287] (II) Initializing built-in extension RANDR [ 210.287] (II) Initializing built-in extension COMPOSITE [ 210.287] (II) Initializing built-in extension DAMAGE [ 210.312] (II) AIGLX: Screen 0 is not DRI2 capable [ 210.312] (II) AIGLX: Screen 0 is not DRI capable [ 210.430] (II) AIGLX: Loaded and initialized swrast [ 210.430] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 210.444] (II) intel(0): Setting screen physical size to 361 x 203 [ 210.983] (II) config/wscons: checking input device /dev/wskbd [ 210.983] (II) wskbd: using layout us [ 210.983] (II) LoadModule: "kbd" [ 210.984] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so [ 210.993] (II) Module kbd: vendor="X.Org Foundation" [ 210.993] compiled for 1.12.2, module version = 1.6.1 [ 210.993] Module class: X.Org XInput Driver [ 210.993] ABI class: X.Org XInput driver, version 16.0 [ 210.993] (II) Using input driver 'kbd' for '/dev/wskbd' [ 210.993] (**) /dev/wskbd: always reports core events [ 210.993] (**) /dev/wskbd: always reports core events [ 210.993] (**) Option "Protocol" "standard" [ 210.993] (**) Option "XkbRules" "base" [ 210.993] (**) Option "XkbModel" "pc105" [ 210.993] (**) Option "XkbLayout" "us" [ 210.993] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: KEYBOARD, id 6) [ 211.841] (II) config/wscons: checking input device /dev/wsmouse0 [ 211.841] (II) LoadModule: "synaptics" [ 211.842] (II) Loading /usr/X11R6/lib/modules/input/synaptics_drv.so [ 211.842] (II) Module synaptics: vendor="X.Org Foundation" [ 211.842] compiled for 1.12.2, module version = 1.6.2 [ 211.842] Module class: X.Org XInput Driver [ 211.842] ABI class: X.Org XInput driver, version 16.0 [ 211.842] (II) Using input driver 'synaptics' for '/dev/wsmouse0' [ 211.843] (**) /dev/wsmouse0: always reports core events [ 211.843] (**) Option "Device" "/dev/wsmouse0" [ 213.208] (--) synaptics: /dev/wsmouse0: x-axis range 1472 - 5706 resolution 52 [ 213.208] (--) synaptics: /dev/wsmouse0: y-axis range 1408 - 4874 resolution 95 [ 213.208] (**) /dev/wsmouse0: always reports core events [ 213.214] (II) XINPUT: Adding extended input device "/dev/wsmouse0" (type: TOUCHPAD, id 7) [ 213.214] (**) synaptics: /dev/wsmouse0: (accel) MinSpeed is now constant deceleration 2.5 [ 213.214] (**) synaptics: /dev/wsmouse0: MaxSpeed is now 1.75 [ 213.214] (**) synaptics: /dev/wsmouse0: AccelFactor is now 0.037 [ 213.214] (**) /dev/wsmouse0: (accel) keeping acceleration scheme 1 [ 213.214] (**) /dev/wsmouse0: (accel) acceleration profile 1 [ 213.214] (**) /dev/wsmouse0: (accel) acceleration factor: 2.000 [ 213.214] (**) /dev/wsmouse0: (accel) acceleration threshold: 4 [ 213.893] (II) config/wscons: checking input device /dev/wsmouse [ 213.893] (II) LoadModule: "ws" [ 213.894] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so [ 213.894] (II) Module ws: vendor="X.Org Foundation" [ 213.894] compiled for 1.12.2, module version = 1.3.0 [ 213.894] Module class: X.Org XInput Driver [ 213.894] ABI class: X.Org XInput driver, version 16.0 [ 213.894] (II) Using input driver 'ws' for '/dev/wsmouse' [ 213.894] (**) /dev/wsmouse: always reports core events [ 213.894] (II) ws: /dev/wsmouse: debuglevel 0 [ 213.894] (**) Option "Device" "/dev/wsmouse" [ 213.895] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5 [ 213.895] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7 [ 213.895] (**) ws: /dev/wsmouse: associated screen: 0 [ 213.895] (II) ws: /dev/wsmouse: minimum x position: 0 [ 213.895] (II) ws: /dev/wsmouse: maximum x position: 1365 [ 213.895] (II) ws: /dev/wsmouse: minimum y position: 0 [ 213.895] (II) ws: /dev/wsmouse: maximum y position: 767 [ 213.895] (==) ws: /dev/wsmouse: Buttons: 7 [ 213.895] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5 [ 213.895] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type: MOUSE, id 8) [ 213.895] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1 [ 213.895] (**) /dev/wsmouse: (accel) acceleration profile 0 [ 213.895] (**) /dev/wsmouse: (accel) acceleration factor: 2.000 [ 213.895] (**) /dev/wsmouse: (accel) acceleration threshold: 4 [ 213.895] PCH FDI RX PLL enable [ 213.930] PCH FDI TX PLL enable 801a2350 [ 213.970] Pipe enable [ 213.970] Plane enable [ 214.010] FDI_RX_IIR 0x100 [ 214.010] FDI train 1 done. [ 214.030] FDI_RX_IIR 0x200 [ 214.030] FDI train 2 done. [ 214.030] FDI train done [ 214.050] FDI TX link normal [ 214.070] transcoder enable [ 214.070] LUT load [ 214.070] DPMS on done [ 214.169] (II) UnloadModule: "kbd" [ 214.169] (II) UnloadModule: "synaptics" [ 214.172] (II) UnloadModule: "ws" [ 214.185] PCH FDI RX PLL enable [ 214.220] PCH FDI TX PLL enable 801a2350 [ 214.260] Pipe enable [ 214.260] Plane enable [ 214.300] FDI_RX_IIR 0x100 [ 214.300] FDI train 1 done. [ 214.320] FDI_RX_IIR 0x200 [ 214.320] FDI train 2 done. [ 214.320] FDI train done [ 214.340] FDI TX link normal [ 214.360] transcoder enable [ 214.360] LUT load [ 214.360] DPMS on done [ 214.391] Server terminated successfully (0). Closing log file. ===== > >> dmesg follows: > >The dmesg you quoted is from 5.2. Please show the -current dmesg from >the USB stick install which actually has the problem. I was not clear enough. I only ran the USB boot to see if the problem with losing video on the Vcons was fixed. The problem is with the 5.2 release not running E. It works well with several WMs but when X is running you have to work blind on the Vcons. I just wanted to see if X in a recent snapshot still hid the other consoles and it doesn't so my new Tpad is on its way. Meanwhile I just want to play with E as it comes with 5.2 release so that I can learn how to config and use E. Then I'll be ready to do testing of your .17 versions when the new Tpad is here. > >I have another unrelated question about the machine: > >> "Realtek RTS5209 Card Reader" rev 0x01 at pci3 dev 0 function 0 not >> configured >> sdhc0 at pci3 dev 0 function 1 "Realtek RTS5209 Card Reader" rev 0x01: >> apic 2 int 19 >> sdmmc0 at sdhc0 > >Does the card reader work in 5.2? Does it work in -current? No. Same dmesg lines. > *** NOTE *** Please DO NOT CC me. I <am> subscribed to the list. Mail to the sender address that does not originate at the list server is tarpitted. The reply-to: address is provided for those who feel compelled to reply off list. Thankyou. Rod/ --- This life is not the real thing. It is not even in Beta. If it was, then OpenBSD would already have a man page for it.
