Dear misc@, I've been trying out KMS on a Dell Latitude X1 sporting Intel 915GM video lately; dmesg and Xorg.0.log below. While it seems to work basically (although I have to admit that I do not find the wscons console's new look all too pleasant -- is it possible to make it look as good as under Linux, say?), it does so rather unsatisfactorily: Under X, everything (except video playback) feels sluggish, particularly scrolling in the web browser. glxgears runs at ~11 fps, glxinfo output looks normal. The only suspicious line in the logs I've found is the kernel message "composite sync not supported". Is this expected behaviour on this kind of hardware, or did I perhaps miss something?
Regards, Dennis -- dmesg output: OpenBSD 5.3-current (GENERIC) #62: Tue Mar 19 23:57:27 MDT 2013 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) M processor 1.10GHz ("GenuineIntel" 686-class) 599 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,NXE,EST,TM2,PERF real mem = 1333133312 (1271MB) avail mem = 1299931136 (1239MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 07/26/06, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3 @ 0xf81a0 (45 entries) bios0: vendor Dell Inc. version "A06" date 07/26/2006 bios0: Dell Inc. Latitude X1 acpi0 at bios0: rev 0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP APIC ASF! MCFG SSDT SSDT SSDT acpi0: wakeup devices LID_(S3) PBTN(S4) PCI0(S5) USB0(S0) USB1(S0) USB2(S0) USB4(S0) USB3(S0) MODM(S3) PCIE(S4) NIC_(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 99MHz ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 1 acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 2 (PCIE) acpicpu0 at acpi0: C3, C3, C2, C1, PSS acpitz0 at acpi0: critical temperature is 95 degC acpiac0 at acpi0: AC unit offline acpibat0 at acpi0: BAT0 model "DELL T61376" serial 490 type LION oem "Sanyo" acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: PBTN acpibtn2 at acpi0: SBTN acpivideo0 at acpi0: VID_ acpivideo1 at acpi0: VID2 bios0: ROM list: 0xc0000/0xf800! 0xcf800/0x800 cpu0: Enhanced SpeedStep 599 MHz: speeds: 1100, 800, 600 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x03 vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x03 intagp0 at vga1 agp0 at intagp0: aperture at 0xc0000000, size 0x10000000 inteldrm0 at vga1 drm0 at inteldrm0 inteldrm0: apic 1 int 16 composite sync not supported inteldrm0: initialized overlay support composite sync not supported wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) "Intel 82915GM Video" rev 0x03 at pci0 dev 2 function 1 not configured ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03: apic 1 int 16 pci1 at ppb0 bus 1 bge0 at pci1 dev 0 function 0 "Broadcom BCM5751" rev 0x01, BCM5750 A1 (0x4001): apic 1 int 16, address xx:xx:xx:xx:xx:xx brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: apic 1 int 16 uhci1 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: apic 1 int 18 uhci2 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: apic 1 int 19 ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: apic 1 int 16 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3 pci2 at ppb1 bus 2 cbb0 at pci2 dev 1 function 0 "Ricoh 5C476 CardBus" rev 0xb3: apic 1 int 19 "Ricoh 5C552 Firewire" rev 0x08 at pci2 dev 1 function 1 not configured sdhc0 at pci2 dev 1 function 2 "Ricoh 5C822 SD/MMC" rev 0x17: apic 1 int 17 sdmmc0 at sdhc0 iwi0 at pci2 dev 3 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: apic 1 int 17, address xx:xx:xx:xx:xx:xx cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x20 pcmcia0 at cardslot0 auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: apic 1 int 16, ICH6 AC97 ac97: codec id 0x83847652 (SigmaTel STAC9752/53) ac97: codec features headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D audio0 at auich0 ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM disabled pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <KingSpec KSD-CF18.6-032MS> wd0: 1-sector PIO, LBA48, 30192MB, 61833216 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 pciide0: channel 1 ignored (disabled) usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pms0: Synaptics touchpad, firmware 6.2 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support sdmmc0: can't enable card vscsi0 at root scsibus0 at vscsi0: 256 targets softraid0 at root scsibus1 at softraid0: 256 targets root on wd0a (d03eeab79eaa31f6.a) swap on wd0b dump on wd0b composite sync not supported composite sync not supported -- Xorg.0.log: [ 13.120] (--) checkDevMem: using aperture driver /dev/xf86 [ 13.138] (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode (version 3.32) [ 13.150] X.Org X Server 1.12.3 Release Date: 2012-07-09 [ 13.150] X Protocol Version 11, Revision 0 [ 13.150] Build Operating System: OpenBSD 5.3 i386 [ 13.150] Current Operating System: OpenBSD x1ii.my.domain 5.3 GENERIC#62 i386 [ 13.151] Build Date: 19 March 2013 08:43:46AM [ 13.151] [ 13.151] Current version of pixman: 0.28.0 [ 13.151] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 13.151] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 13.151] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 24 12:13:48 2013 [ 13.154] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d" [ 13.157] (==) No Layout section. Using the first Screen section. [ 13.157] (==) No screen section available. Using defaults. [ 13.157] (**) |-->Screen "Default Screen Section" (0) [ 13.157] (**) | |-->Monitor "<default monitor>" [ 13.158] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 13.158] (==) Disabling SIGIO handlers for input devices [ 13.158] (==) Automatically adding devices [ 13.158] (==) Automatically enabling devices [ 13.173] (==) FontPath set to: /usr/X11R6/lib/X11/fonts/misc/, /usr/X11R6/lib/X11/fonts/TTF/, /usr/X11R6/lib/X11/fonts/OTF/, /usr/X11R6/lib/X11/fonts/Type1/, /usr/X11R6/lib/X11/fonts/100dpi/, /usr/X11R6/lib/X11/fonts/75dpi/ [ 13.174] (==) ModulePath set to "/usr/X11R6/lib/modules" [ 13.174] (II) The server relies on wscons to provide the list of input devices. If no devices become available, reconfigure wscons or disable AutoAddDevices. [ 13.174] (II) Loader magic: 0x3c022040 [ 13.174] (II) Module ABI versions: [ 13.174] X.Org ANSI C Emulation: 0.4 [ 13.174] X.Org Video Driver: 12.0 [ 13.174] X.Org XInput driver : 16.0 [ 13.174] X.Org Server Extension : 6.0 [ 13.175] (--) PCI:*(0:0:2:0) 8086:2592:1028:01a3 rev 3, Mem @ 0xdff00000/524288, 0xc0000000/268435456, 0xdfec0000/262144, I/O @ 0x0000ec38/8 [ 13.175] (--) PCI: (0:0:2:1) 8086:2792:1028:01a3 rev 3, Mem @ 0xdff80000/524288 [ 13.175] (II) LoadModule: "extmod" [ 13.181] (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so [ 13.183] (II) Module extmod: vendor="X.Org Foundation" [ 13.183] compiled for 1.12.3, module version = 1.0.0 [ 13.183] Module class: X.Org Server Extension [ 13.183] ABI class: X.Org Server Extension, version 6.0 [ 13.183] (II) Loading extension MIT-SCREEN-SAVER [ 13.183] (II) Loading extension XFree86-VidModeExtension [ 13.183] (II) Loading extension XFree86-DGA [ 13.183] (II) Loading extension DPMS [ 13.183] (II) Loading extension XVideo [ 13.184] (II) Loading extension XVideo-MotionCompensation [ 13.184] (II) Loading extension X-Resource [ 13.184] (II) LoadModule: "dbe" [ 13.185] (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so [ 13.187] (II) Module dbe: vendor="X.Org Foundation" [ 13.187] compiled for 1.12.3, module version = 1.0.0 [ 13.187] Module class: X.Org Server Extension [ 13.187] ABI class: X.Org Server Extension, version 6.0 [ 13.187] (II) Loading extension DOUBLE-BUFFER [ 13.187] (II) LoadModule: "glx" [ 13.189] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so [ 13.193] (II) Module glx: vendor="X.Org Foundation" [ 13.193] compiled for 1.12.3, module version = 1.0.0 [ 13.193] ABI class: X.Org Server Extension, version 6.0 [ 13.194] (==) AIGLX enabled [ 13.194] (II) Loading extension GLX [ 13.194] (II) LoadModule: "record" [ 13.195] (II) Loading /usr/X11R6/lib/modules/extensions/librecord.so [ 13.197] (II) Module record: vendor="X.Org Foundation" [ 13.197] compiled for 1.12.3, module version = 1.13.0 [ 13.197] Module class: X.Org Server Extension [ 13.197] ABI class: X.Org Server Extension, version 6.0 [ 13.197] (II) Loading extension RECORD [ 13.197] (II) LoadModule: "dri" [ 13.199] (II) Loading /usr/X11R6/lib/modules/extensions/libdri.so [ 13.202] (II) Module dri: vendor="X.Org Foundation" [ 13.202] compiled for 1.12.3, module version = 1.0.0 [ 13.202] ABI class: X.Org Server Extension, version 6.0 [ 13.202] (II) Loading extension XFree86-DRI [ 13.203] (II) LoadModule: "dri2" [ 13.204] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so [ 13.206] (II) Module dri2: vendor="X.Org Foundation" [ 13.206] compiled for 1.12.3, module version = 1.2.0 [ 13.206] ABI class: X.Org Server Extension, version 6.0 [ 13.206] (II) Loading extension DRI2 [ 13.206] (==) Matched intel as autoconfigured driver 0 [ 13.206] (==) Matched vesa as autoconfigured driver 1 [ 13.206] (==) Assigned the driver to the xf86ConfigLayout [ 13.206] (II) LoadModule: "intel" [ 13.207] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so [ 13.213] (II) Module intel: vendor="X.Org Foundation" [ 13.213] compiled for 1.12.3, module version = 2.20.19 [ 13.213] Module class: X.Org Video Driver [ 13.213] ABI class: X.Org Video Driver, version 12.0 [ 13.214] (II) LoadModule: "vesa" [ 13.215] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so [ 13.217] (II) Module vesa: vendor="X.Org Foundation" [ 13.217] compiled for 1.12.3, module version = 2.3.2 [ 13.217] Module class: X.Org Video Driver [ 13.217] ABI class: X.Org Video Driver, version 12.0 [ 13.217] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server, Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2), Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2), Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2), Haswell Server (GT2+), Haswell SDV Desktop (GT1), Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+), Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2), Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1), Haswell SDV Server (GT2), Haswell SDV Server (GT2+), Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2), Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1), Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+), Haswell ULT Server (GT1), Haswell ULT Server (GT2), Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1), Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+), Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2), Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1), Haswell CRW Server (GT2), Haswell CRW Server (GT2+), ValleyView PO board [ 13.218] (II) VESA: driver for VESA chipsets: vesa [ 13.218] drmOpenDevice: node name is /dev/drm0 [ 13.218] drmOpenDevice: open result is 10, (OK) [ 13.218] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 13.218] drmOpenDevice: node name is /dev/drm0 [ 13.219] drmOpenDevice: open result is 10, (OK) [ 13.219] drmOpenByBusid: drmOpenMinor returns 10 [ 13.219] drmOpenByBusid: Interface 1.4 failed, trying 1.1 [ 13.219] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 13.219] drmOpenDevice: node name is /dev/drm0 [ 13.219] drmOpenDevice: open result is 10, (OK) [ 13.219] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 13.219] drmOpenDevice: node name is /dev/drm0 [ 13.219] drmOpenDevice: open result is 10, (OK) [ 13.219] drmOpenByBusid: drmOpenMinor returns 10 [ 13.219] drmOpenByBusid: Interface 1.4 failed, trying 1.1 [ 13.219] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 13.219] (WW) Falling back to old probe method for vesa [ 13.220] drmOpenDevice: node name is /dev/drm0 [ 13.220] drmOpenDevice: open result is 10, (OK) [ 13.220] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 13.220] drmOpenDevice: node name is /dev/drm0 [ 13.220] drmOpenDevice: open result is 10, (OK) [ 13.220] drmOpenByBusid: drmOpenMinor returns 10 [ 13.220] drmOpenByBusid: Interface 1.4 failed, trying 1.1 [ 13.220] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 13.220] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 13.220] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 13.220] (==) intel(0): RGB weight 888 [ 13.220] (==) intel(0): Default visual is TrueColor [ 13.221] (--) intel(0): Integrated Graphics Chipset: Intel(R) 915GM [ 13.222] (**) intel(0): Relaxed fencing disabled [ 13.222] (**) intel(0): Wait on SwapBuffers? enabled [ 13.222] (**) intel(0): Triple buffering? enabled [ 13.222] (**) intel(0): Framebuffer tiled [ 13.222] (**) intel(0): Pixmaps tiled [ 13.222] (**) intel(0): 3D buffers tiled [ 13.222] (**) intel(0): SwapBuffers wait enabled [ 13.222] (==) intel(0): video overlay key set to 0x101fe [ 13.517] (II) intel(0): Output LVDS1 has no monitor section [ 13.706] (II) intel(0): Output VGA1 has no monitor section [ 14.151] (II) intel(0): Output TV1 has no monitor section [ 14.446] (II) intel(0): EDID for output LVDS1 [ 14.446] (II) intel(0): Manufacturer: LCD Model: 5800 Serial#: 892678453 [ 14.446] (II) intel(0): Year: 2005 Week: 29 [ 14.446] (II) intel(0): EDID Version: 1.3 [ 14.446] (II) intel(0): Digital Display Input [ 14.447] (II) intel(0): Max Image Size [cm]: horiz.: 26 vert.: 16 [ 14.447] (II) intel(0): Gamma: 2.20 [ 14.447] (II) intel(0): No DPMS capabilities specified [ 14.447] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 14.447] (II) intel(0): First detailed timing is preferred mode [ 14.447] (II) intel(0): redX: 0.617 redY: 0.332 greenX: 0.297 greenY: 0.546 [ 14.447] (II) intel(0): blueX: 0.147 blueY: 0.126 whiteX: 0.313 whiteY: 0.329 [ 14.447] (II) intel(0): Manufacturer's mask: 0 [ 14.447] (II) intel(0): Supported standard timings: [ 14.447] (II) intel(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129 [ 14.447] (II) intel(0): Supported detailed timing: [ 14.447] (II) intel(0): clock: 79.5 MHz Image Size: 264 x 159 mm [ 14.447] (II) intel(0): h_active: 1280 h_sync: 1344 h_sync_end 1472 h_blank_end 1664 h_border: 0 [ 14.447] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 778 v_blanking: 798 v_border: 0 [ 14.447] (II) intel(0): Supported detailed timing: [ 14.447] (II) intel(0): clock: 79.5 MHz Image Size: 264 x 159 mm [ 14.447] (II) intel(0): h_active: 1280 h_sync: 1344 h_sync_end 1472 h_blank_end 1664 h_border: 0 [ 14.447] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 778 v_blanking: 798 v_border: 0 [ 14.447] (II) intel(0): G6742¢121EX9 [ 14.447] (II) intel(0): Œ¯¡x]8 [ 14.447] (II) intel(0): EDID (in hex): [ 14.447] (II) intel(0): 00ffffffffffff003064005835313535 [ 14.447] (II) intel(0): 1d0f0103801a10780a03d59e554c8b25 [ 14.447] (II) intel(0): 20505400000081000101010101010101 [ 14.447] (II) intel(0): 0101010101010e1f008051001e304080 [ 14.447] (II) intel(0): 3700089f100000180e1f008051001e30 [ 14.448] (II) intel(0): 40803700089f10000001000000fe0047 [ 14.448] (II) intel(0): 36373432a23132314558390a000000fe [ 14.448] (II) intel(0): 00bcafa195785d380001010a202000a1 [ 14.448] (II) intel(0): EDID vendor "LCD", prod id 22528 [ 14.448] (II) intel(0): DDCModeFromDetailedTiming: 1280x768 Warning: We only handle separate sync. [ 14.448] (II) intel(0): Printing DDC gathered Modelines: [ 14.448] (II) intel(0): Modeline "1280x768"x0.0 79.50 1280 1344 1472 1664 768 771 778 798 -hsync -vsync (47.8 kHz eP) [ 14.448] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e) [ 14.449] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 14.449] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 14.449] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 14.449] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 14.449] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 14.449] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 14.449] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 14.449] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 14.449] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 14.449] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 14.449] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 14.449] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 14.449] (II) intel(0): Printing probed modes for output LVDS1 [ 14.449] (II) intel(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync -vsync (47.8 kHz eP) [ 14.449] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 14.449] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 14.450] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 14.450] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 14.634] (II) intel(0): EDID for output VGA1 [ 15.084] (II) intel(0): EDID for output TV1 [ 15.084] (II) intel(0): Output LVDS1 connected [ 15.084] (II) intel(0): Output VGA1 disconnected [ 15.084] (II) intel(0): Output TV1 disconnected [ 15.084] (II) intel(0): Using exact sizes for initial modes [ 15.084] (II) intel(0): Output LVDS1 using initial mode 1280x768 [ 15.085] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 15.085] (II) intel(0): Kernel page flipping support detected, enabling [ 15.085] (**) intel(0): Display dimensions: (260, 160) mm [ 15.085] (**) intel(0): DPI set to (125, 121) [ 15.085] (II) Loading sub module "fb" [ 15.085] (II) LoadModule: "fb" [ 15.089] (II) Loading /usr/X11R6/lib/modules/libfb.so [ 15.091] (II) Module fb: vendor="X.Org Foundation" [ 15.091] compiled for 1.12.3, module version = 1.0.0 [ 15.091] ABI class: X.Org ANSI C Emulation, version 0.4 [ 15.091] (II) Loading sub module "dri2" [ 15.091] (II) LoadModule: "dri2" [ 15.093] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so [ 15.093] (II) Module dri2: vendor="X.Org Foundation" [ 15.093] compiled for 1.12.3, module version = 1.2.0 [ 15.093] ABI class: X.Org Server Extension, version 6.0 [ 15.093] (II) UnloadModule: "vesa" [ 15.093] (II) Unloading vesa [ 15.093] (==) Depth 24 pixmap format is 32 bpp [ 15.094] (II) intel(0): [DRI2] Setup complete [ 15.094] (II) intel(0): [DRI2] DRI driver: i915 [ 15.094] (II) intel(0): Allocated new frame buffer 1280x768 stride 8192, tiled [ 15.099] (II) UXA(0): Driver registered support for the following operations: [ 15.099] (II) solid [ 15.099] (II) copy [ 15.099] (II) composite (RENDER acceleration) [ 15.099] (II) put_image [ 15.099] (II) get_image [ 15.099] (==) intel(0): Backing store disabled [ 15.099] (==) intel(0): Silken mouse disabled [ 15.101] (II) intel(0): Initializing HW Cursor [ 15.102] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 15.105] (==) intel(0): DPMS enabled [ 15.105] (==) intel(0): Intel XvMC decoder disabled [ 15.105] (II) intel(0): Set up textured video [ 15.105] (II) intel(0): Set up overlay video [ 15.107] (II) intel(0): direct rendering: DRI2 Enabled [ 15.179] (--) RandR disabled [ 15.179] (II) Initializing built-in extension Generic Event Extension [ 15.179] (II) Initializing built-in extension SHAPE [ 15.180] (II) Initializing built-in extension MIT-SHM [ 15.180] (II) Initializing built-in extension XInputExtension [ 15.180] (II) Initializing built-in extension XTEST [ 15.180] (II) Initializing built-in extension BIG-REQUESTS [ 15.180] (II) Initializing built-in extension SYNC [ 15.180] (II) Initializing built-in extension XKEYBOARD [ 15.180] (II) Initializing built-in extension XC-MISC [ 15.180] (II) Initializing built-in extension SECURITY [ 15.180] (II) Initializing built-in extension XINERAMA [ 15.180] (II) Initializing built-in extension XFIXES [ 15.180] (II) Initializing built-in extension RENDER [ 15.180] (II) Initializing built-in extension RANDR [ 15.180] (II) Initializing built-in extension COMPOSITE [ 15.180] (II) Initializing built-in extension DAMAGE [ 15.283] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 15.283] (II) AIGLX: enabled GLX_INTEL_swap_event [ 15.283] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 15.283] (II) AIGLX: enabled GLX_SGI_make_current_read [ 15.283] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 15.284] (II) AIGLX: Loaded and initialized i915 [ 15.284] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 15.286] (II) intel(0): Setting screen physical size to 338 x 203 [ 15.748] (II) config/wscons: checking input device /dev/wskbd [ 15.748] (II) wskbd: ignoring "user" layout [ 15.748] (II) LoadModule: "kbd" [ 15.750] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so [ 15.752] (II) Module kbd: vendor="X.Org Foundation" [ 15.752] compiled for 1.12.3, module version = 1.6.2 [ 15.752] Module class: X.Org XInput Driver [ 15.752] ABI class: X.Org XInput driver, version 16.0 [ 15.752] (II) Using input driver 'kbd' for '/dev/wskbd' [ 15.752] (**) /dev/wskbd: always reports core events [ 15.752] (**) /dev/wskbd: always reports core events [ 15.752] (**) Option "Protocol" "standard" [ 15.752] (**) Option "XkbRules" "base" [ 15.752] (**) Option "XkbModel" "pc105" [ 15.752] (**) Option "XkbLayout" "us" [ 15.752] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: KEYBOARD, id 6) [ 16.201] (II) config/wscons: checking input device /dev/wsmouse0 [ 16.201] (II) LoadModule: "synaptics" [ 16.204] (II) Loading /usr/X11R6/lib/modules/input/synaptics_drv.so [ 16.206] (II) Module synaptics: vendor="X.Org Foundation" [ 16.206] compiled for 1.12.3, module version = 1.6.2 [ 16.206] Module class: X.Org XInput Driver [ 16.206] ABI class: X.Org XInput driver, version 16.0 [ 16.206] (II) Using input driver 'synaptics' for '/dev/wsmouse0' [ 16.206] (**) /dev/wsmouse0: always reports core events [ 16.206] (**) Option "Device" "/dev/wsmouse0" [ 17.191] (--) synaptics: /dev/wsmouse0: x-axis range 1472 - 5472 resolution 100 [ 17.191] (--) synaptics: /dev/wsmouse0: y-axis range 1408 - 4448 resolution 110 [ 17.191] (**) /dev/wsmouse0: always reports core events [ 17.192] (II) XINPUT: Adding extended input device "/dev/wsmouse0" (type: TOUCHPAD, id 7) [ 17.192] (**) synaptics: /dev/wsmouse0: (accel) MinSpeed is now constant deceleration 2.5 [ 17.192] (**) synaptics: /dev/wsmouse0: MaxSpeed is now 1.75 [ 17.192] (**) synaptics: /dev/wsmouse0: AccelFactor is now 0.040 [ 17.193] (**) /dev/wsmouse0: (accel) keeping acceleration scheme 1 [ 17.193] (**) /dev/wsmouse0: (accel) acceleration profile 1 [ 17.193] (**) /dev/wsmouse0: (accel) acceleration factor: 2.000 [ 17.193] (**) /dev/wsmouse0: (accel) acceleration threshold: 4 [ 17.636] (II) config/wscons: checking input device /dev/wsmouse [ 17.636] (II) LoadModule: "ws" [ 17.638] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so [ 17.640] (II) Module ws: vendor="X.Org Foundation" [ 17.640] compiled for 1.12.3, module version = 1.3.0 [ 17.640] Module class: X.Org XInput Driver [ 17.640] ABI class: X.Org XInput driver, version 16.0 [ 17.640] (II) Using input driver 'ws' for '/dev/wsmouse' [ 17.640] (**) /dev/wsmouse: always reports core events [ 17.640] (II) ws: /dev/wsmouse: debuglevel 0 [ 17.640] (**) Option "Device" "/dev/wsmouse" [ 17.640] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5 [ 17.640] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7 [ 17.640] (**) ws: /dev/wsmouse: associated screen: 0 [ 17.641] (II) ws: /dev/wsmouse: minimum x position: 0 [ 17.641] (II) ws: /dev/wsmouse: maximum x position: 1279 [ 17.641] (II) ws: /dev/wsmouse: minimum y position: 0 [ 17.641] (II) ws: /dev/wsmouse: maximum y position: 767 [ 17.641] (==) ws: /dev/wsmouse: Buttons: 7 [ 17.641] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5 [ 17.641] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type: MOUSE, id 8) [ 17.641] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1 [ 17.641] (**) /dev/wsmouse: (accel) acceleration profile 0 [ 17.641] (**) /dev/wsmouse: (accel) acceleration factor: 2.000 [ 17.641] (**) /dev/wsmouse: (accel) acceleration threshold: 4