On Wed, Nov 16, 2005 at 11:45:51PM -0500, Stephen Takacs wrote: > I've got a new Acer Aspire 3003WLCi laptop that works fairly well > (minus the obvious winmodem and Broadcom wifi) except that it won't > boot with the pciide DMA enabled. I can get it to boot by forcing > PIO mode only, but even then it won't recognize the DVD/CD-RW drive > (a Slimtype COMBO SOSC-2483K) on the second channel. Just to be > sure, I checked with an old Knoppix CD, and it works correctly there. > > This is what I get when trying to boot normally (default flags): > wd0(pciide0:0:0): timeout > type: ata > c_bcount: 512 > c_skip: 0 > pciide0:0:0: bus_master DMA error: missing interrupt, status=0x21 > ..and it freezes up right there! > > Below is the dmesg of a successful boot in PIO-4 (but without the CD > drive!) The machine is currently running 3.7-release. I glanced at > the changelog for 3.8, but didn't notice anything relevant. Any > ideas on what else I could try? > > OpenBSD 3.7 (GENERIC) #50: Sun Mar 20 00:01:57 MST 2005 > [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: Mobile AMD Sempron(tm) Processor 3000+ ("AuthenticAMD" 686-class) 1.80 > GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,PNI > real mem = 501784576 (490024K) > avail mem = 450854912 (440288K) > using 4278 buffers containing 25190400 bytes (24600K) of memory > User Kernel Config > UKC> change wd > 37 wd* at wdc0|wdc1|wdc*|wdc*|pciide* channel -1 flags 0x0 > change (y/n) ? > channel [-1] ? > flags [0] ? 0xffc > 37 wd* changed > 37 wd* at wdc0|wdc1|wdc*|wdc*|pciide* channel -1 flags 0xffc > UKC> quit > Continuing... > mainbus0 (root) > bios0 at mainbus0: AT/286+(39) BIOS, date 08/24/05, BIOS32 rev. 0 @ 0xfd5f0 > pcibios0 at bios0: rev 2.1 @ 0xfd5f0/0xa10 > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdd30/160 (8 entries) > pcibios0: PCI Interrupt Router at 000:02:0 ("SIS 85C503 System" rev 0x00) > pcibios0: PCI bus #2 is the last bus > bios0: ROM list: 0xc0000/0xc000 0xcc000/0xa000 0xdc000/0x8000! > cpu0 at mainbus0 > pci0 at mainbus0 bus 0: configuration mode 1 (no bios) > pchb0 at pci0 dev 0 function 0 "SIS 760 PCI" rev 0x03
Support for the SiS 760 went in after 3.7 try something newer.