A little more precision, my server have network, but some times he looses also network for 1 second and CARP goes to master on this backup servers and generate instability. I think there is a problem somewhere, but i don't know why. To compare, i have two Dell R320 with BCM5720 and EM, on works perfect and have only Trunk+VLAN The other have Trunk+Vlan+CARP/PFSync and have networking problems. -- Best regards, Loïc BLOT, UNIX systems, security and network expert http://www.unix-experience.fr
Le lundi 06 mai 2013 à 14:59 +1000, David Gwynne a écrit : > do you have a real serial console hooked up to the machines? more specifically, can you break into ddb when the machine breaks and get a trace? > > i use carp on vlans on lacp trunks on top of myx(4) and em(4) "quite a lot" without trouble, so its likely to be bge(4) if you ask me. unfortunately that means its my fault or responsibility. > > if you could get a trace to verify, that would be much appreciated. > > cheers, > dlg > > On 05/05/2013, at 4:11 AM, Loïc Blot <loic.b...@unix-experience.fr> wrote: > > > Hello misc. > > On thursay i have upgraded one of our BGP border routers to OpenBSD 5.3, > > and i was pleased to get the BCM5720 working. I have added it to > > existing LACP trunk for LAN (2 LACP, 2 ports on WAN 4 on LAN now). > > There is no problem on this router. > > > > Today, i want to upgrade exactly same model (Dell R320 with PCI Intel > > CARD and BCM5720 on motherbroad plus PCI BCM5720), and i have some very > > problematic issues. OpenBSD upgrade works like a charm, but when i use > > LACP with broadcom cards, after a moment, system totally freeze and > > nothing responds (on ssh connect but also on the server screen and > > keyboard). > > On this router ports must be agregated by 3 (3 for LAN 3 for DMZ), then > > each trunk have 1 intel port and 2 broadcom ports. > > I have tried two configuration, same BCM5720 card in the trunk and 1 > > port from each card. Same problem appears. > > To finish, i have disabled all ports except working Intel card, but the > > problem also occurs.... The only solution i have found to get server > > working is to up bge1 and bge2 and down other interfaces (on the CISCO > > 2960G switch, ios 12.2(55)SE3), it's the only case when server doesn't > > freeze. > > When i do each try and i think it was a success i waited 5 min and > > problem occurs, or problem occurs when i reboot the machine. > > > > Other detail, the working router with BCM 5720 is between an Alcatel > > 6850 and a CISCO 4507 (Supervisor IV, ios 12.2(54)SG) > > > > OpenBSD mustn't freeze totally, i think something is missing on BCM > > driver or on LACP handling or maybe BCM + LACP + CARP isn't a good idea > > but i haven't any choice :s > > > > Thanks for advance. > > -- > > Best regards, > > > > Loïc BLOT, Engineering > > UNIX Systems, Security and Networks > > http://www.unix-experience.fr [demime 1.01d removed an attachment of type application/pgp-signature which had a name of signature.asc]
