Hi,
I have been running OpenBSD 4.9 on a Tyan S5160 for a couple years now
just fine. I backed up my data and did a fresh install of 5.3. The
install went flawlessly but after the install and the reboot, the system
boots but then panics when looking for the root device.
I have tried changing all of the sata controller options in the bios
(enhanced/compatible) and the ahci options as well (enable/disable) to
no avail.
I did a fresh install of 5.2 after that thinking there might be
something about the MB that 5.3 didn't like but got the exact same result.
I have a single sata hdd installed as my OS drive that shows up and sd1
during install that I install the OS onto and an areca 1210 4 port sata
raid card installed for storage that shows up as sd0 during install.
I have included dmesg and the debugger trace and ps below.
Thanks,
Aaron
# cu -eo -l /dev/cua00 -s 115200
Connected
Phoenix TrustedCore(tm) Server
Copyright 1985-2004 Phoenix Technologies Ltd.
All Rights Reserved
TYAN Tomcat i7230A S5160 BIOS v1.05
CPU = 1 Processors Detected, Cores per Processor = 2
Intel(R) Pentium(R) D CPU 3.00GHz
1023M System RAM Passed
2048 KB L2 Cache per Processor Core
System BIOS shadowed
Video BIOS shadowed
Fixed Disk 0: ST3160815AS
ATAPI CD-ROM: ATAPI DVD A DH16A1S
Press <F2> to enter SETUP
>> OpenBSD/i386 BOOT 3.21
boot>
booting hd0a:/bsd: 8425188+1102788 [52+382544+368841]=0x9cdb6c
entry point at 0x200120
[ using 751812 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2013 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.3 (GENERIC.MP) #58: Tue Mar 12 18:43:53 MDT 2013
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Pentium(R) D CPU 3.00GHz ("GenuineIntel" 686-class) 3.01 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,CNXT-ID,CX16,xTPR,PDCM,LAHF
real mem = 1071706112 (1022MB)
avail mem = 1043185664 (994MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/10/07, BIOS32 rev. 0 @ 0xfd450,
SMBIOS rev. 2.31 @ 0x3feea000 (42 entries)
bios0: vendor Phoenix Technologies LTD version "6.00" date 05/10/2007
bios0: TYAN Computer S5160
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP MCFG APIC BOOT SPCR SSDT
acpi0: wakeup devices DEV1(S4) EXP1(S4) LAN1(S4) LAN2(S4) PCIB(S4)
KBC0(S4) MSE0(S4) AC97(S1) PWRB(S3) USB1(S4) USB24) USB4(S4) EUSB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-9
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) D CPU 3.00GHz ("GenuineIntel" 686-class) 3.01 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,CNXT-ID,CX16,xTPR,PDCM,LAHF
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (DEV1)
acpiprt2 at acpi0: bus 4 (EXP1)
acpiprt3 at acpi0: bus 5 (LAN1)
acpiprt4 at acpi0: bus 6 (LAN2)
acpiprt5 at acpi0: guration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel E7230 Host" rev 0x81
ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0x81: apic 2 int 16
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel IOP332 PCIE-PCIX" rev 0x07
pci2 at ppb1 bus 2
arc0 at pci2 dev 14 function 0 "Areca ARC-1210" rev 0x00: apic 2 int 18
arc0: 4 ports, 256MB SDRAM, firmware V1.47 2009-07-02
scsibus0 at arc0: 16 targets
sd0 at scsibus0 ppb2 at pci1 dev 0 function 2 "Intel IOP332 PCIE-PCIX"
rev 0x07
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 2 int 20
pci4 at ppb3 bus 4
ppb4 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01: apic 2 int 20
pci5 at ppb4 bus 5
bge0 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1
(0x4101): apic 2 int 16, address 00:e0:81:5e:1d:4f
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb5 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01: apic 2 int 21
pci6 at ppb5 bus 6
bge1 at pci6 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1
(0x4101): apic 2 int 17, address 00:e0:81:5e:1d:4e
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb6 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci7 at ppb6 bus 10
vga1 at pci7 dev 1 function 0 "XGI Technology Volari Z7" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x01: msi, AHCI 1.1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
scsibus1 at ahci0: 32 targets
sd1 at scsibus1 2801GB SMBus" rev 0x01: apic 2 int 19
iic0 at ichiic0
adt0 at iic0 addr 0x2e: sch5017 rev 0x8a
spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-5300CL5
spdmem1 at iic0 addr 0x52: 512MB DDR2 SDRAM non-parity PC2-5300CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 pnpx0 at isa0 port 0xf0/16: reported by CPUID; using
exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
disklabels not read: sd1 cd0 fd0
panic: root device (6e74d7f65ecaa74a) not found
Stopped at Debugger+0x4: popl %ebp
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
IF RUNNING SMP, USE 'mach ddbcpu <#>' AND 'trace' ON OTHER PROCESSORS, TOO.
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb{0}> trace
Debugger(d090270a,d0bcfd54,d08dfc8c,d0bcfd54,d1f83000) at Debugger+0x4
panic(d08dfc8c,6e,74,d7,f6) at panic+0x5d
setroot(d1f52600,0,4000,d0bcfe94,1) at setroot+0xb88
diskconf(d08d69c1,0,d08dd789,0,0) at diskconf+0x12e
main(d02004f6,d02004fe,0,0,0) at main+0x592
ddb{0}> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
10 0 0 0 3 0x100200 bored crypto
9 0 0 0 3 0x100200 pftm pfpurge
8 0 0 0 3 0x100200 usbtsk usbtask
7 0 0 0 3 0x100200 usbatsk usbatsk
6 0 0 0 3 0x100200 acpi0 acpi0
5 0 0 0 3 0x40100200 idle1
4 0 0 0 2 0x100200 syswq
3 0 0 0 3 0x40100200 idle0
2 0 0 0 3 0x100200 kmalloc kmthread
1 0 0 0 3 0 initexec swapper
* 0 -1 0 0 7 0x200 swapper
