Followup #2.
I tried booting the older kernels available to me to see if I could
narrow down the range of the time this problem began.
The kernel from June 9 boots as expected and carp moves to master status
as it should.
The kernel from June 13 boots but carp stays stuck in INIT.
The most recent snapshot also boots with carp staying in INIT.
I hope that narrows the range down enough to provide a clue.
Thanks again.
Jeff
Followup:
When running sh -x /etc/netstart, I get the following on the firewall
stuck in INIT:
+ ifmstart trunk svlan vlan carp
ifconfig: SIOCAIFADDR: No buffer space available
ifconfig: SIOCAIFADDR: No buffer space available
The normally backup firewall running /etc/netstart from
OpenBSD 5.3-current (GENERIC.MP) #148: Tue Apr 30 11:41:58 MDT 2013
t...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
shows this instead
+ ifmstart trunk svlan vlan carp gif gre pfsync pppoe tun bridge
Hope that helps!
Jeff
Hi all,
Tonight I updated to the June 17 snapshot on my primary firewall. Before
updating carp has been working flawlessly, with this server the primary
and its twin the secondary. When I'd reboot the primary the secondary
would become master but only until the primary had finished rebooting.
After updating and reboot the primary's carp0 and carp1 interfaces
remain in INIT.
I did run sysmerge and don't see anything apropos in the Running
-current section of the FAQ.
My secondary firewall took over as carp master on reboot but I'm a
little leery of updating or even rebooting it to see if the primary will
take over--I'm 650 miles from the server room :-)
dmesg, ifconfig -a and /etc/hostname* follow.
Thanks,
Jeff Ross
OpenBSD 5.3-current (GENERIC.MP) #7: Mon Jun 17 12:17:04 MDT 2013
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.21 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,LONG,SSE3,DTES64,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR,LAHF,PERF
real mem = 3757490176 (3583MB)
avail mem = 3684646912 (3513MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/29/05, BIOS32 rev. 0 @ 0xf0010,
SMBIOS rev. 2.3 @ 0xfa380 (61 entries)
bios0: vendor American Megatrends Inc. version "080010" date 03/29/2005
bios0: SiMech R200
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP APIC OEMB
acpi0: wakeup devices PXHA(S4) PXHB(S4) EPA0(S4) EPA1(S4) EPB0(S4)
EPB1(S4) EPC0(S4) P0P1(S4) MC97(S4) USB1(S1) USB2(S1) EUSB(S4) PS2K(S4)
PS2M(S4) P0PC(S4) SLPB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 6 (application processor)
cpu1: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.21 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,LONG,SSE3,DTES64,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR,LAHF,PERF
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.21 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,LONG,SSE3,DTES64,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR,LAHF,PERF
cpu3 at mainbus0: apid 7 (application processor)
cpu3: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.21 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,LONG,SSE3,DTES64,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR,LAHF,PERF
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 11 pa 0xfec10000, version 20, 24 pins
ioapic1: misconfigured as apic 9, remapped to apid 11
ioapic2 at mainbus0: apid 9 pa 0xfec80000, version 20, 24 pins
ioapic2: misconfigured as apic 10, remapped to apid 9
ioapic3 at mainbus0: apid 10 pa 0xfec80400, version 20, 24 pins
ioapic3: misconfigured as apic 11, remapped to apid 10
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (EPA0)
acpiprt2 at acpi0: bus 3 (PXHA)
acpiprt3 at acpi0: bus 2 (PXHB)
acpiprt4 at acpi0: bus 4 (EPA1)
acpiprt5 at acpi0: bus 6 (P0P1)
acpiprt6 at acpi0: bus 5 (P0PC)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpicpu2 at acpi0
acpicpu3 at acpi0
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x800 0xc8800/0x1000 0xc9800/0x1000
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel E7320 Host" rev 0x0c
ppb0 at pci0 dev 2 function 0 "Intel E7520 PCIE" rev 0x0c
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel 6700PXH PCIE-PCIX" rev 0x09
pci2 at ppb1 bus 3
mpi0 at pci2 dev 5 function 0 "Symbios Logic 53c1030" rev 0xc1: msi
scsibus0 at mpi0: 16 targets, initiator 7
ppb2 at pci1 dev 0 function 2 "Intel 6700PXH PCIE-PCIX" rev 0x09
pci3 at ppb2 bus 2
em0 at pci3 dev 1 function 0 "Intel 82546GB" rev 0x03: apic 10 int 0,
address 00:1b:21:15:6a:82
em1 at pci3 dev 1 function 1 "Intel 82546GB" rev 0x03: apic 10 int 1,
address 00:1b:21:15:6a:83
ppb3 at pci0 dev 3 function 0 "Intel E7520 PCIE" rev 0x0c
pci4 at ppb3 bus 4
ppb4 at pci0 dev 28 function 0 "Intel 6300ESB PCIX" rev 0x02
pci5 at ppb4 bus 5
em2 at pci5 dev 1 function 0 "Intel 82541GI" rev 0x05: apic 11 int 2,
address 00:30:48:87:2e:b0
em3 at pci5 dev 2 function 0 "Intel 82541GI" rev 0x05: apic 11 int 3,
address 00:30:48:87:2e:b1
uhci0 at pci0 dev 29 function 0 "Intel 6300ESB USB" rev 0x02: apic 8 int 16
uhci1 at pci0 dev 29 function 1 "Intel 6300ESB USB" rev 0x02: apic 8 int 19
"Intel 6300ESB WDT" rev 0x02 at pci0 dev 29 function 4 not configured
"Intel 6300ESB APIC" rev 0x02 at pci0 dev 29 function 5 not configured
ehci0 at pci0 dev 29 function 7 "Intel 6300ESB USB" rev 0x02: apic 8 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x0a
pci6 at ppb5 bus 6
vga1 at pci6 dev 2 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 6300ESB LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 6300ESB IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
ichiic0 at pci0 dev 31 function 3 "Intel 6300ESB SMBus" rev 0x02: apic 8
int 17
iic0 at ichiic0
lm1 at iic0 addr 0x2c: W83627HF
lm2 at iic0 addr 0x2f: W83792D rev D
spdmem0 at iic0 addr 0x51: 1GB DDR SDRAM registered ECC PC2700CL2.5
spdmem1 at iic0 addr 0x53: 1GB DDR SDRAM registered ECC PC2700CL2.5
spdmem2 at iic0 addr 0x55: 1GB DDR SDRAM registered ECC PC2700CL2.5
spdmem3 at iic0 addr 0x56: 1GB DDR SDRAM registered ECC PC2700CL2.5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x41
lm3 at wbsio0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
lm1: disabling sensors due to alias with lm3
umass0 at uhub0 port 3 configuration 1 interface 0 "Imation Nano Pro"
rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <Imation, Nano Pro, PMAP> SCSI0 0/direct
removable serial.071806381903272E63D3
sd0: 3822MB, 512 bytes/sector, 7827456 sectors
umass1 at uhub0 port 4 configuration 1 interface 0 "Imation Nano Pro"
rev 2.00/1.00 addr 3
umass1: using SCSI over Bulk-Only
scsibus2 at umass1: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <Imation, Nano Pro, PMAP> SCSI0 0/direct
removable serial.071806381C036D10AFE6
sd1: 3822MB, 512 bytes/sector, 7827456 sectors
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (f68e09b9e44543c9.a) swap on sd0b dump on sd0b
carp: carp1 demoted group carp by 1 to 129 (carpdev)
carp: pfsync0 demoted group carp by 32 to 161 (pfsync init)
carp: pfsync0 demoted group pfsync by 32 to 32 (pfsync init)
carp: pfsync0 demoted group carp by 1 to 162 (pfsync bulk start)
carp: pfsync0 demoted group pfsync by 1 to 33 (pfsync bulk start)
carp: carp1 demoted group carp by -1 to 161 (carpdev)
carp: pfsync0 demoted group carp by -1 to 32 (pfsync bulk fail)
carp: pfsync0 demoted group pfsync by -1 to 32 (pfsync bulk fail)
carp: pfsync0 demoted group carp by -32 to 0 (pfsync init)
carp: pfsync0 demoted group pfsync by -32 to 0 (pfsync init)
pfsync: failed to receive bulk update
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33192
priority: 0
groups: lo
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
inet 127.0.0.1 netmask 0xff000000
em0: flags=8b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST>
mtu 1500
lladdr 00:1b:21:15:6a:82
priority: 0
media: Ethernet autoselect (100baseTX full-duplex,rxpause,txpause)
status: active
inet6 fe80::21b:21ff:fe15:6a82%em0 prefixlen 64 scopeid 0x1
em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:1b:21:15:6a:83
priority: 0
media: Ethernet autoselect (1000baseT
full-duplex,master,rxpause,txpause)
status: active
inet 192.168.255.1 netmask 0xffffff00 broadcast 192.168.255.255
inet6 fe80::21b:21ff:fe15:6a83%em1 prefixlen 64 scopeid 0x2
em2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:30:48:87:2e:b0
priority: 0
media: Ethernet autoselect (none)
status: no carrier
em3: flags=8b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST>
mtu 1500
lladdr 00:30:48:87:2e:b1
priority: 0
media: Ethernet autoselect (1000baseT full-duplex,rxpause,txpause)
status: active
inet 10.31.16.8 netmask 0xffffff00 broadcast 10.31.16.255
inet6 fe80::230:48ff:fe87:2eb1%em3 prefixlen 64 scopeid 0x4
enc0: flags=0<>
priority: 0
groups: enc
status: active
pfsync0: flags=41<UP,RUNNING> mtu 1500
priority: 0
pfsync: syncdev: em1 maxupd: 128 defer: off
groups: carp pfsync
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33192
priority: 0
groups: pflog
carp0: flags=8803<UP,BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:00:5e:00:01:01
priority: 0
carp: INIT carpdev em0 vhid 1 advbase 1 advskew 0
groups: carp
inet6 fe80::200:5eff:fe00:101%carp0 prefixlen 64 scopeid 0x8
carp1: flags=8803<UP,BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:00:5e:00:01:02
priority: 0
carp: INIT carpdev em3 vhid 2 advbase 1 advskew 0
groups: carp
inet6 fe80::200:5eff:fe00:102%carp1 prefixlen 64 scopeid 0x9
/etc/hostname.carp0
inet 69.144.146.94 255.255.255.252 69.144.146.255 vhid 1 pass wykids
carpdev em0
/etc/hostname.carp1
inet 10.31.16.1 255.255.255.0 10.31.16.255 vhid 2 pass wykids carpdev em3
/etc/hostname.em0
up
/etc/hostname.em1
!/etc/scripts/start_svscan.sh
inet 192.168.255.1 255.255.255.0
/etc/hostname.em3
!/etc/scripts/start_svscan.sh
inet 10.31.16.8 255.255.255.0
/etc/hostname.pfsync0
!/etc/scripts/start_svscan.sh
up syncdev em1
/etc/scripts/start_svscan.sh
#!/bin/sh
/usr/bin/pgrep svscan
status=$?
if [ $status -eq 0 ] ; then
echo $status svscan already running!
else
echo $status starting svscan...
/bin/csh -cf '/command/svscanboot &'
/bin/sleep 5
fi
