2013/6/29 Johan Huldtgren <johan+openbsd-po...@huldtgren.com>:
> hello,
>
> while updating my server today it panics on boot. I can work around
> the issue and get it up by doing bsd -c and then a 'disable viomb'
I was just about to report similar symptoms. Likewise, system works ok
with viomb disabled.
Drop me a line if ddb output is essential, I will need to write it
down manually.
Dmesg from last working kernel:
OpenBSD 5.3-current (GENERIC) #4: Sun Jun 23 18:37:55 CEST 2013
d...@frigg.0x29a.it:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 520085504 (495MB)
avail mem = 498597888 (475MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xfd9b0 (10 entries)
bios0: vendor HAL 9000 version "Bochs" date 01/01/2011
bios0: e24cloud Bochs
acpi0 at bios0: rev 0
acpi0: sleep states S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC HPET
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
acpihpet0 at acpi0: 100000000 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: QEMU Virtual CPU version 1.4.2, 1700.30 MHz
cpu0:
FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,POPCNT,NXE,LONG,LAHF,CMPLEG,ABM,SSE4A
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu0: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu0: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu0: apic clock running at 1000MHz
mpbios0: bus 0 is type PCI
mpbios0: bus 1 is type ISA
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 11, 24 pins
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00
pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 1.4.> ATAPI 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 1 function 2 "Intel 82371SB USB" rev 0x01: apic 0 int 11
piixpm0 at pci0 dev 1 function 3 "Intel 82371AB Power" rev 0x03: apic 0 int 9
iic0 at piixpm0
iic0: addr 0x4c 48=00 words 00=0000 01=0000 02=0000 03=0000 04=0000
05=0000 06=0000 07=0000
iic0: addr 0x4e 48=00 words 00=0000 01=0000 02=0000 03=0000 04=0000
05=0000 06=0000 07=0000
vga1 at pci0 dev 2 function 0 "Cirrus Logic CL-GD5446" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
virtio0 at pci0 dev 3 function 0 "Qumranet Virtio Network" rev 0x00:
Virtio Network Device
vio0 at virtio0: address 52:54:00:76:bb:38
virtio0: apic 0 int 11
virtio1 at pci0 dev 4 function 0 "Qumranet Virtio Console" rev 0x00:
Virtio Console Device
virtio1: no matching child driver; not configured
virtio2 at pci0 dev 5 function 0 "Qumranet Virtio Storage" rev 0x00:
Virtio Block Device
vioblk0 at virtio2
scsibus1 at vioblk0: 2 targets
sd0 at scsibus1 targ 0 lun 0: <VirtIO, Block Device, > SCSI3 0/direct fixed
sd0: 40960MB, 512 bytes/sector, 83886080 sectors
virtio2: apic 0 int 10
virtio3 at pci0 dev 6 function 0 "Qumranet Virtio Memory" rev 0x00:
Virtio Memory Balloon Device
viomb0 at virtio3
virtio3: apic 0 int 10
"Intel 6300ESB WDT" rev 0x00 at pci0 dev 7 function 0 not configured
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 1: density unknown
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
nvram: invalid checksum
mtrr: Pentium Pro MTRR support
uhidev0 at uhub0 port 1 configuration 1 interface 0 "QEMU QEMU USB
Tablet" rev 1.00/0.00 addr 2
uhidev0: iclass 3/0
uhid0 at uhidev0: input=6, output=0, feature=0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (d165180d79cfec23.a) swap on sd0b dump on sd0b
clock: unknown CMOS layout
