Hi, I've been running OpenBSD for a couple of months on my server. Recently the hard drive of my desktop computer (on Debian) died so I tought I would try OpenBSD for my desktop. I successfully installed 5.3 amd64 on it with XFCE but I never succeeded in having sound from it.
I installed PC-BSD (on a separate HDD) and at first there wasn't sound neither. PC-BSD provides a panel control (with GUI) where I was able to change the default audio device and then sound was working. I grep the dmesg (at the end of the mail, there are the two complete dmesg) dmesg | grep pcm pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 pcm1: <Realtek ALC889A (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1 pcm2: <Realtek ALC889A (Front Analog)> at nid 27 and 25 on hdaa1 pcm3: <Realtek ALC889A (Rear Digital)> at nid 30 and 31 on hdaa1 The audio device which is working on PC-BSD is pcm1. I looked for these device in the dmesg from OpenBSD but they are not present. All I can find about is azalia1 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02: msi azalia1: codecs: Realtek ALC885 audio0 at azalia1 I give you PC-BSD and OpenBSD dmesg and the output of audioctl and mixerctl. PC-BSD dmesg : Copyright (c) 1992-2013 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.2-RELEASE-p7 #0: Wed Sep 11 15:02:50 UTC 2013 r...@amd64-builder.pcbsd.org:/usr/obj/usr/src/sys/GENERIC amd64 gcc version 4.2.1 20070831 patched [FreeBSD] module zlib already present! CPU: Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz (3000.06-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6fb Family = 0x6 Model = 0xf Stepping = 11 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant, performance statistics real memory = 2146304000 (2046 MB) avail memory = 2034683904 (1940 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <GBT GBTUACPI> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 WARNING: VIMAGE (virtualized network stack) is a highly experimental feature. ioapic0: Changing APIC ID to 2 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 cryptosoft0: <software crypto> on motherboard aesni0: No AESNI support. acpi0: <GBT GBTUACPI> on motherboard acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 7fde0000 (3) failed cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xa000-0xa0ff mem 0xe0000000-0xefffffff,0xf5000000-0xf500ffff irq 16 at device 0.0 on pci1 hdac0: <ATI RV770 HDA Controller> mem 0xf5010000-0xf5013fff irq 17 at device 0.1 on pci1 uhci0: <Intel 82801I (ICH9) USB controller> port 0xd100-0xd11f irq 16 at device 26.0 on pci0 uhci0: LegSup = 0x2f00 usbus0 on uhci0 uhci1: <Intel 82801I (ICH9) USB controller> port 0xd200-0xd21f irq 21 at device 26.1 on pci0 uhci1: LegSup = 0x2f00 usbus1 on uhci1 uhci2: <Intel 82801I (ICH9) USB controller> port 0xd000-0xd01f irq 18 at device 26.2 on pci0 uhci2: LegSup = 0x2f00 usbus2 on uhci2 ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf8104000-0xf81043ff irq 18 at device 26.7 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 hdac1: <Intel 82801I HDA Controller> mem 0xf8100000-0xf8103fff irq 22 at device 27.0 on pci0 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pci3: <ACPI PCI bus> on pcib3 atapci0: <JMicron JMB363 UDMA133 controller> port 0xb000-0xb007,0xb100-0xb103,0xb200-0xb207,0xb300-0xb303,0xb400-0xb40f mem 0xf8000000-0xf8001fff irq 19 at device 0.0 on pci3 ahci0: <JMicron JMB363 AHCI SATA controller> at channel -1 on atapci0 ahci0: AHCI v1.00 with 2 3Gbps ports, Port Multiplier supported ahci0: quirks=0x1<NOFORCE> ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ata2: <ATA channel> at channel 0 on atapci0 pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 pci4: <ACPI PCI bus> on pcib4 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0xc000-0xc0ff mem 0xf7000000-0xf7000fff irq 16 at device 0.0 on pci4 re0: Using 1 MSI message re0: Chip rev. 0x38000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Ethernet address: 00:1a:4d:5a:71:ae uhci3: <Intel 82801I (ICH9) USB controller> port 0xd300-0xd31f irq 23 at device 29.0 on pci0 usbus4 on controller> uhci3 uhci4: <Intel 82801I (ICH9) USB controller> port controller> 0xd400-0xd41f irq 19 at device 29.1 on pci0 usbus5 on uhci4 uhci5: <Intel 82801I (ICH9) USB controller> port 0xd500-0xd51f irq 18 at device 29.2 on pci0 usbus6 on uhci5 ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf8105000-0xf81053ff irq 23 at device 29.7 on pci0 usbus7: EHCI version 1.0 usbus7 on ehci1 pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci5: <ACPI PCI bus> on pcib5 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH9 SATA300 controller> port 0xd600-0xd607,0xd700-0xd703,0xd800-0xd807,0xd900-0xd903,0xda00-0xda0f,0xdb00-0xdb0f irq 19 at device 31.2 on pci0 ata3: <ATA channel> at channel 0 on atapci1 ata4: <ATA channel> at channel 1 on atapci1 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) atapci2: <Intel ICH9 SATA300 SMBus> controller> port SMBus> controller> 0xdd00-0xdd07,0xde00-0xde03,0xdf00-0xdf07,0xe000-0xe003,0xe100-0xe10f,0xe200-0xe20f SMBus> controller> irq 19 at device 31.5 on pci0 ata5: <ATA channel> at channel 0 on atapci2 ata6: <ATA channel> at channel 1 on atapci2 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcf7ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] acpi_perf0: <ACPI CPU Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 92a092a0600092a device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 10.000 msec vboxdrv: fAsync=0 offMin=0x18c offMax=0x2b5 ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled DUMMYNET 0xfffffe00023f8c00 with IPv6 initialized (100409) load_dn_sched dn_sched FIFO loaded load_dn_sched dn_sched PRIO loaded load_dn_sched dn_sched QFQ loaded load_dn_sched dn_sched RR loaded load_dn_sched dn_sched WF2Q+ loaded hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 hdacc1: <Realtek ALC889A HDA CODEC> at cad 2 on hdac1 hdaa1: <Realtek ALC889A Audio Function Group> at nid 1 on hdacc1 pcm1: <Realtek ALC889A (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1 pcm2: <Realtek ALC889A (Front Analog)> at nid 27 and 25 on hdaa1 pcm3: <Realtek ALC889A (Rear Digital)> at nid 30 and 31 on hdaa1 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 12Mbps Full Speed USB v1.0 usbus7: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <Intel> at usbus5 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1: <Intel> at usbus6 uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 ugen7.1: <Intel> at usbus7 uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub6: 2 ports with 2 removable, self powered ada0 at ata3 bus 0 scbus3 target 0 lun 0 ada0: <ST1000DM003-1CH162 CC47> ATA-9 SATA 3.x device ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada0: 953868MB (1953523055 512 byte sectors: 16H 63S/T 16383C) ada0: quirks=0x1<4K> ada0: Previously was known as ad10 cd0 at ata4 bus 0 scbus4 target 0 lun 0 SMP: AP CPU #1 Launched! cd0: <TSSTcorp CDDVDW SH-S203B SB01> Removable CD-ROM SCSI-0 device cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed Timecounter "TSC-low" frequency 1500030850 Hz quality 1000 Root mount waiting for: usbus7 usbus3 uhub7: 6 ports with 6 removable, self powered uhub3: 6 ports with 6 removable, self powered Root mount waiting for: usbus3 Root mount waiting for: usbus3 ugen3.2: <JMicron> at usbus3 umass0: <MSC Bulk-Only Transfer> on usbus3 umass0: SCSI over Bulk-Only; quirks = 0x0100 umass0:7:0:-1: Attached to scbus7 da0 at umass-sim0 bus 0 scbus7 target 0 lun 0 da0: <WDC WD50 01AALS-00L3B2 > Fixed Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 476938MB (976771055 512 byte sectors: 255H 63S/T 60801C) da0: quirks=0x2<NO_6_BYTE> Root mount waiting for: usbus3 Root mount waiting for: usbus3 ugen3.3: <PNY Technologies> at usbus3 umass1: <PNY Technologies USB 2.0 FD, class 0/0, rev 2.00/40.96, addr 3> on usbus3 umass1: SCSI over Bulk-Only; quirks = 0x0100 umass1:8:1:-1: Attached to scbus8 da1 at umass-sim1 bus 1 scbus8 target 0 lun 0 da1: <PNY USB 2.0 FD 4096> Removable Direct Access SCSI-0 device da1: 40.000MB/s transfers da1: 3824MB (7831552 512 byte sectors: 255H 63S/T 487C) da1: quirks=0x2<NO_6_BYTE> Trying to mount root from zfs:tank1/ROOT/default []... ugen1.2: <vendor 0x04f3> at usbus1 ukbd0: <vendor 0x04f3 product 0x0103, class 0/0, rev 1.10/1.05, addr 2> on usbus1 kbd2 at ukbd0 uhid0: <vendor 0x04f3 product 0x0103, class 0/0, rev 1.10/1.05, addr 2> on usbus1 ugen2.2: <Razer> at usbus2 ums0: <Razer Razer DeathAdder, class 0/0, rev 2.00/1.00, addr 2> on usbus2 ums0: 7 buttons and [XYZ] coordinates ID=0 drm0: <ATI Radeon 4800 Series> on vgapci0 info: [drm] MSI enabled 1 message(s) info: [drm] Initialized radeon 1.31.0 20080613 info: [drm] Setting GART location based on new memory map info: [drm] Loading RV770/RV790 Microcode info: [drm] Resetting GPU info: [drm] writeback test succeeded in 1 usecs Cuse4BSD v0.1.30 @ /dev/cuse SGI XFS with large block numbers, tracing, no debug enabled WARNING: attempt to domain_add(bluetooth) after domainfinalize() fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.19 ugen3.2: <JMicron> at usbus3 (disconnected) umass0: at uhub3, port 1, addr 2 (disconnected) (da0:umass-sim0:0:0:0): lost device - 0 outstanding, 2 refs (da0:umass-sim0:0:0:0): removing device entry OpenBSD dmesg : OpenBSD 5.3 (GENERIC.MP) #62: Tue Mar 12 18:21:20 MDT 2013 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 2145255424 (2045MB) avail mem = 2065715200 (1970MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0100 (39 entries) bios0: vendor Award Software International, Inc. version "F6" date 09/07/2007 bios0: Gigabyte Technology Co., Ltd. P35-DS3R acpi0 at bios0: rev 0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP HPET MCFG APIC SSDT SSDT acpi0: wakeup devices PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(S5) PEX5(S5) HUB0(S5) UAR1(S3) IGBE(S4) USB0(S3) USB1(S3) USB2(S3) USB3(S3) US31(S3) USB4(S3) USB5(S3) USBE(S3) USE2(S3) AZAL(S5) PCI0(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63 acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz, 3000.38 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF cpu0: 4MB 64b/line 16-way L2 cache cpu0: apic clock running at 333MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz, 3000.00 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF cpu1: 4MB 64b/line 16-way L2 cache ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 2 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 2 (PEX0) acpiprt2 at acpi0: bus -1 (PEX1) acpiprt3 at acpi0: bus -1 (PEX2) acpiprt4 at acpi0: bus 3 (PEX3) acpiprt5 at acpi0: bus 4 (PEX4) acpiprt6 at acpi0: bus -1 (PEX5) acpiprt7 at acpi0: bus 5 (HUB0) acpicpu0 at acpi0: FVS, 3000, 2000 MHz acpicpu1 at acpi0: FVS, 3000, 2000 MHz acpibtn0 at acpi0: PWRB pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02 ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x02: msi pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "ATI Radeon HD 4850" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) radeondrm0 at vga1: apic 2 int 16 drm0 at radeondrm0 azalia0 at pci1 dev 0 function 1 "ATI Radeon HD 48xx HD Audio" rev 0x00: msi azalia0: no supported codecs uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 2 int 16 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 2 int 21 uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02: apic 2 int 18 ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 2 int 18 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia1 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02: msi azalia1: codecs: Realtek ALC885 audio0 at azalia1 ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: msi pci2 at ppb1 bus 2 ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x02: msi pci3 at ppb2 bus 3 jmb0 at pci3 dev 0 function 0 "JMicron JMB363 IDE/SATA" rev 0x02 ahci0 at jmb0: apic 2 int 19, AHCI 1.0 scsibus0 at ahci0: 32 targets pciide0 at jmb0: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide0: using apic 2 int 19 for native-PCI interrupt pciide0: channel 0 disabled (no drives) pciide0: channel 1 disabled (no drives) ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: msi pci4 at ppb3 bus 4 re0 at pci4 dev 0 function 0 "Realtek 8168" rev 0x01: RTL8168 2 (0x3800), apic 2 int 16, address 00:1a:4d:5a:71:ae rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2 uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 2 int 23 uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 2 int 19 uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 2 int 18 ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 2 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92 pci5 at ppb4 bus 5 pcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02 pciide1 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using apic 2 int 19 for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: <WDC WD800JD-75MSA2> wd0: 16-sector PIO, LBA48, 76292MB, 156247887 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6 atapiscsi0 at pciide1 channel 1 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <TSSTcorp, CDDVDW SH-S203B, SB01> ATAPI 5/cdrom removable cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5 ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 2 int 18 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5 pciide2 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide2: using apic 2 int 19 for native-PCI interrupt usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb7 at uhci5: USB revision 1.0 uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 it0 at isa0 port 0x2e/2: IT8718F rev 4, EC port 0x290 mtrr: Pentium Pro MTRR support uhidev0 at uhub3 port 1 configuration 1 interface 0 "vendor 0x04f3 product 0x0103" rev 1.10/1.05 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub3 port 1 configuration 1 interface 1 "vendor 0x04f3 product 0x0103" rev 1.10/1.05 addr 2 uhidev1: iclass 3/0, 2 report ids uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0 uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0 uhidev2 at uhub4 port 2 configuration 1 interface 0 "Razer Razer DeathAdder" rev 2.00/1.00 addr 2 uhidev2: iclass 3/1 ums0 at uhidev2: 7 buttons, Z dir wsmouse0 at ums0 mux 0 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets sd0 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed sd0: 76284MB, 512 bytes/sector, 156231533 sectors softraid0: volume sd0 is roaming, it used to be sd1, updating metadata root on sd0a (cf5afbb0ca6163e9.a) swap on sd0b dump on sd0b $ audioctl name=HD-Audio version=1.0 config=azalia1 encodings=slinear_le:16:2:1,slinear_le:20:4:1,slinear_le:24:4:1 properties=full_duplex,independent full_duplex=0 fullduplex=0 blocksize=9600 hiwat=6 lowat=1 output_muted=0 monitor_gain=0 mode= play.rate=48000 play.channels=2 play.precision=16 play.bps=2 play.msb=1 play.encoding=slinear_le play.gain=0 play.balance=32 play.port=0x0 play.avail_ports=0x0 play.seek=9600 play.samples=624000 play.eof=0 play.pause=0 play.error=1 play.waiting=0 play.open=0 play.active=0 play.buffer_size=65536 play.block_size=9600 play.errors=2400 record.rate=48000 record.channels=2 record.precision=16 record.bps=2 record.msb=1 record.encoding=slinear_le record.gain=125 record.balance=32 record.port=0x0 record.avail_ports=0x0 record.seek=0 record.samples=0 record.eof=0 record.pause=0 record.error=0 record.waiting=0 record.open=0 record.active=0 record.buffer_size=65536 record.block_size=9600 record.errors=0 $ mixerctl record.adc-0:1_mute=off record.adc-0:1=125,125 record.adc-2:3_mute=off record.adc-2:3=125,125 record.adc-4:5_mute=off record.adc-4:5=125,125 record.dig-adc-0:1_sou=SPDIF-in inputs.mix_source=mic,mic2,line-in,hp,cd,beep,line-grn,line-blk,line-org,line-gry inputs.mix_mic=120,120 inputs.mix_mic2=120,120 inputs.mix_line-in=120,120 inputs.mix_hp=120,120 inputs.mix_cd=120,120 inputs.mix_beep=120,120 inputs.mix_line-grn=120,120 inputs.mix_line-blk=120,120 inputs.mix_line-org=120,120 inputs.mix_line-gry=120,120 outputs.mix2=0,0 inputs.mix2_source=dac-0:1,mix outputs.mix3=126,126 inputs.mix3_source=dac-4:5,mix outputs.mix4=126,126 inputs.mix4_source=dac-2:3,mix outputs.mix5=126,126 inputs.mix5_source=dac-6:7,mix outputs.line-grn_source=mix2 outputs.line-grn_mute=off inputs.line-grn=85,85 outputs.line-grn_dir=output outputs.line-grn_boost=off outputs.line-blk_source=mix3 outputs.line-blk_mute=off inputs.line-blk=85,85 outputs.line-blk_dir=output outputs.line-blk_boost=off outputs.line-org_source=mix4 outputs.line-org_mute=off inputs.line-org=85,85 outputs.line-org_dir=output outputs.line-org_boost=off outputs.line-gry_source=mix5 outputs.line-gry_mute=off inputs.line-gry=85,85 outputs.line-gry_dir=output outputs.line-gry_boost=off outputs.mic_source=mix2 outputs.mic_mute=off inputs.mic=85,85 outputs.mic_dir=input-vr80 outputs.mic_boost=off outputs.mic2_source=mix2 outputs.mic2_mute=off inputs.mic2=85,85 outputs.mic2_dir=input-vr80 outputs.mic2_boost=off outputs.line-in_source=mix2 outputs.line-in_mute=off inputs.line-in=85,85 outputs.line-in_dir=input outputs.line-in_boost=off outputs.hp_source=mix9 outputs.hp_mute=off inputs.hp=85,85 outputs.hp_dir=output outputs.hp_boost=off outputs.SPDIF_source=dig-dac-0:1 record.adc-4:5_source=mic,mic2,line-in,hp,cd,beep,line-grn,line-blk,line-org,line-gry,mix record.adc-2:3_source=mic,mic2,line-in,hp,cd,beep,line-grn,line-blk,line-org,line-gry,mix record.adc-0:1_source=mic,mic2,line-in,hp,cd,beep,line-grn,line-blk,line-org,line-gry,mix outputs.mix9=0,0 inputs.mix9_source=dac-8:9,mix outputs.line-grn_sense=plugged outputs.line-blk_sense=unplugged outputs.line-org_sense=plugged outputs.line-gry_sense=unplugged outputs.mic_sense=unplugged outputs.mic2_sense=unplugged outputs.line-in_sense=unplugged outputs.hp_sense=unplugged outputs.master=0,0 outputs.master.mute=off outputs.master.slaves=mix2,line-grn,hp,mix9 record.volume=125,125 record.volume.mute=off record.volume.slaves=adc-0:1,adc-2:3,adc-4:5 outputs.mode=analog record.mode=analog -- Vigdis