-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Am Sun, 5 May 2013 15:12:07 +0200
schrieb Stefan Wollny <ste...@wollny.de>:
> On Sat, 4 May 2013 21:18:35 +0200
> Erwin Geerdink <m...@erwingeerdink.com> wrote:
>
> > Hi,
> >
> > Since I upgraded to OpenBSD 5.3 Release (following the upgrade guide
> > on the website), I have experienced the following problem with
> > claws-mail v3.8.1: Every time I try to fetch mail, a dialog 'Changed
> > SSL certificate' pops up, for each of my mailboxes. No matter if I
> > choose 'Cancel connection' or 'Accept and Save certificates', both
> > frequently result in a core dump.
> > Even when claws does not crash, the certs are not properly saved,
> > for the dialog shows up every subsequent fetch. The SSL certs are
> > stored to disk (~/.claws-mail/certs/), but information about owner
> > and signer is '<not in certificate>'.
> >
> > Core dumps also occur when sending mail.
> > As you understand, this makes usage quite a pain.
> >
> > Does anyone experience this issue as well?
> Hi Erwin,
> Hi misc@!
>
> I do experience this behaviour as well - as of this morning I use the
> latest 5.3-current (#148) and claws-mail hasn't crashed for an hour.
> Yet it keeps complaining about the SSL certs being changed.
>
> I just did a fresh install of my system based on 5.3-current (#147).
>
> The ./claws-mail/certs folder has permissions 700 while the certs
> within have 644 - I have no idea if this has an effect on claws-mail.
>
> If I can help with any other info or testing just drop me a line.
>
> Cheers,
> STEFAN
>
> OpenBSD 5.3-current (GENERIC.MP) #148: Tue Apr 30 11:41:58 MDT 2013
> t...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel(R) Core(TM) Duo CPU T2400 @ 1.83GHz ("GenuineIntel"
> 686-class) 1.83 GHz cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,MWAIT,VMX,EST,TM2,xTPR,PDCM,PERF
> real mem = 3219517440 (3070MB) avail mem = 3155484672 (3009MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 08/27/09, BIOS32 rev. 0 @
> 0xfd6b0, SMBIOS rev. 2.4 @ 0xe0010 (68 entries) bios0: vendor LENOVO
> version "79ETE5WW (2.25 )" date 08/27/2009 bios0: LENOVO 200855G
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET BOOT SSDT SSDT
> SSDT SSDT SSDT acpi0: wakeup devices LID_(S3) SLPB(S3) LURT(S3)
> DURT(S3) EXP0(S4) EXP1(S4) EXP2(S4) EXP3(S4) PCI1(S4) USB0(S3)
> USB1(S3) USB2(S3) USB7(S3) HDEF(S4) acpitimer0 at acpi0: 3579545 Hz,
> 24 bits acpiec0 at acpi0 acpimadt0 at acpi0 addr 0xfee00000: PC-AT
> compat cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 166MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM) Duo CPU T2400 @ 1.83GHz ("GenuineIntel"
> 686-class) 1.83 GHz cpu1:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,MWAIT,VMX,EST,TM2,xTPR,PDCM,PERF
> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 2, remapped to apid 1 acpimcfg0 at
> acpi0 addr 0xf0000000, bus 0-63 acpihpet0 at acpi0: 14318179 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 1 (AGP_)
> acpiprt2 at acpi0: bus 2 (EXP0)
> acpiprt3 at acpi0: bus 3 (EXP1)
> acpiprt4 at acpi0: bus 4 (EXP2)
> acpiprt5 at acpi0: bus 12 (EXP3)
> acpiprt6 at acpi0: bus 21 (PCI1)
> acpicpu0 at acpi0: C2, C1, PSS
> acpicpu1 at acpi0: C2, C1, PSS
> acpipwrres0 at acpi0: PUBS
> acpitz0 at acpi0: critical temperature is 127 degC
> acpitz1 at acpi0: critical temperature is 99 degC
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: SLPB
> acpibat0 at acpi0: BAT0 model "92P1139" serial 6480 type LION oem
> "Panasonic" acpibat1 at acpi0: BAT1 not present
> acpiac0 at acpi0: AC unit online
> acpithinkpad0 at acpi0
> acpidock0 at acpi0: GDCK not docked (0)
> bios0: ROM list: 0xc0000/0xfe00 0xd0000/0x1000 0xd1000/0x1000
> 0xdc000/0x4000! 0xe0000/0x10000! cpu0: Enhanced SpeedStep 1829 MHz:
> speeds: 1833, 1333, 1000 MHz pci0 at mainbus0 bus 0: configuration
> mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev
> 0x03 ppb0 at pci0 dev 1 function 0 "Intel 82945GM PCIE" rev 0x03:
> apic 1 int 16 pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility X1300 M52-64" rev
> 0x00 radeondrm0 at vga1: apic 1 int 16
> drm0 at radeondrm0
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02:
> msi azalia0: codecs: Analog Devices AD1981HD, Conexant/0x2bfa, using
> Analog Devices AD1981HD audio0 at azalia0
> ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 1
> int 20 pci2 at ppb1 bus 2
> em0 at pci2 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00:
> msi, address 00:15:58:31:de:bd ppb2 at pci0 dev 28 function 1 "Intel
> 82801GB PCIE" rev 0x02: apic 1 int 21 pci3 at ppb2 bus 3
> wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02:
> msi, MoW2, address 00:18:de:9c:fd:27 ppb3 at pci0 dev 28 function 2
> "Intel 82801GB PCIE" rev 0x02: apic 1 int 22 pci4 at ppb3 bus 4
> ppb4 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 1
> int 23 pci5 at ppb4 bus 12
> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1
> int 16 uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02:
> apic 1 int 17 uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev
> 0x02: apic 1 int 18 uhci3 at pci0 dev 29 function 3 "Intel 82801GB
> USB" rev 0x02: apic 1 int 19 ehci0 at pci0 dev 29 function 7 "Intel
> 82801GB USB" rev 0x02: apic 1 int 19 usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
> pci6 at ppb5 bus 21
> cbb0 at pci6 dev 0 function 0 "TI PCI1510 CardBus" rev 0x00: apic 1
> int 16 cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 22 device 0 cacheline 0x8, lattimer 0xb0
> pcmcia0 at cardslot0
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM
> disabled pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev
> 0x02: DMA, channel 0 wired to compatibility, channel 1 wired to
> compatibility wd0 at pciide0 channel 0 drive 0: <ST95005620AS> wd0:
> 16-sector PIO, LBA48, 476940MB, 976773168 sectors wd0(pciide0:0:0):
> using PIO mode 4, Ultra-DMA mode 6 wd1 at pciide0 channel 1 drive 0:
> <TOSHIBA MK6459GSXP> wd1: 16-sector PIO, LBA48, 610480MB, 1250263728
> sectors wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic
> 1 int 23 iic0 at ichiic0
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot #0)
> pckbc0: using irq 12 for aux slot #0
> wsmouse0 at pms0 mux 0
> wsmouse1 at pms0 mux 0
> pms0: Synaptics touchpad, firmware 6.2
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> aps0 at isa0 port 0x1600/31
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> mtrr: Pentium Pro MTRR support
> uhub5 at uhub0 port 5 "Genesys Logic USB2.0 Hub" rev 2.00/77.61 addr 2
> uhub6 at uhub5 port 2 "Genesys Logic USB2.0 Hub" rev 2.00/77.61 addr 3
> uhidev0 at uhub6 port 2 configuration 1 interface 0 "Logitech
> Trackball" rev 1.10/2.20 addr 4 uhidev0: iclass 3/1
> ums0 at uhidev0: 3 buttons, Z dir
> wsmouse2 at ums0 mux 0
> ulpt0 at uhub5 port 4 configuration 1 interface 0 "Hewlett-Packard HP
> LaserJet 3055" rev 2.00/1.00 addr 5 ulpt0: using bi-directional mode
> ugen0 at uhub5 port 4 configuration 1 "Hewlett-Packard HP LaserJet
> 3055" rev 2.00/1.00 addr 5 vscsi0 at root
> scsibus0 at vscsi0: 256 targets
> softraid0 at root
> scsibus1 at softraid0: 256 targets
> root on wd0a (1e18fdc3ddb71e63.a) swap on wd0b dump on wd0b
>
Just for the records:
As of -current #65 (Sept., 23rd, 2013) claws-mail has been
upgraded to version 3.9.2.
I no longer witness the described behaviour. Or with plain word:
claws-mail is functioning again as a 'dumb user' would expect.
To all those who made this possible: THANK YOU!
Regards,
STEFAN
Mit freundlichen Grüßen,
STEFAN WOLLNY
Regulatory Reporting Consultancy
Tel.: +49 (0) 177 655 7875
Fax.: +49 (0) 3212 655 7875
Mail: ste...@wollny.de
GnuPG-Key ID: 0x9C26F1D0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=EIfh
-----END PGP SIGNATURE-----
