I've got an HP dx5150MT minitower of 2006 vintage, and with OpenBSD 5.4
stable no USB devices are recognized whether they're attached before or
after boot. No console message, nothing appended to dmesg.
Same thing happens whether I use amd64 MP or SP kernel - I'm about to
send dmesg reports but thought it worth querying here at the same time.
On the same machine USB works fine with XP.
A lost cause?
dmesg:
OpenBSD 5.4 (GENERIC.MP) #41: Tue Jul 30 15:30:02 MDT 2013
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3136225280 (2990MB)
avail mem = 3045076992 (2904MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0000 (50 entries)
bios0: vendor Phoenix Technologies, LTD version "1.18" date 08/01/2006
bios0: Hewlett-Packard HP dx5150 MT
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT MCFG APIC
acpi0: wakeup devices USB0(S3) USB1(S3) USB2(S3) AUDO(S3) P2P_(S5)
MAC_(S3) UAR1(S5) PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+, 1994.48 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+, 1994.20 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (P2P_)
acpiprt2 at acpi0: bus 1 (AGP_)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpitz0 at acpi0: critical temperature is 82 degC
acpibtn0 at acpi0: PWRB
cpu0: Cool'n'Quiet K8 1994 MHz: speeds: 2000 1800 1000 MHz
pci0 at mainbus0 bus 0
0:0:0: mem address conflict 0xe0000000/0x20000000
pchb0 at pci0 dev 0 function 0 "ATI RS480 Host" rev 0x10
ppb0 at pci0 dev 1 function 0 "ATI RS480 PCIE" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon XPRESS 200" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
vendor "ATI", unknown product 0x5854 (class display subclass
miscellaneous, rev 0x00) at pci1 dev 5 function 1 not configured
ppb1 at pci0 dev 5 function 0 "ATI RS480 PCIE" rev 0x00
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM5751" rev 0x20, BCM5750 C0
(0x4200): apic 2 int 17, address 00:16:17:9e:92:97
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
pciide0 at pci0 dev 18 function 0 "ATI SB400 SATA" rev 0x00: DMA
pciide0: using apic 2 int 23 for native-PCI interrupt
pciide0: port 0: device present, speed: 1.5Gb/s
wd0 at pciide0 channel 0 drive 0: <WDC WD1600JS-60MHB1>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using BIOS timings, Ultra-DMA mode 5
pciide0: port 1: device present, speed: 1.5Gb/s
wd1 at pciide0 channel 1 drive 0: <Hitachi HDT725050VLA360>
wd1: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
wd1(pciide0:1:0): using BIOS timings, Ultra-DMA mode 6
ohci0 at pci0 dev 19 function 0 "ATI SB400 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ohci1 at pci0 dev 19 function 1 "ATI SB400 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci0 at pci0 dev 19 function 2 "ATI SB400 USB2" rev 0x00: apic 2 int 18
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SB400 SMBus" rev 0x11: SMI
iic0 at piixpm0
iic0: addr 0x2f 00=82 01=0f 02=00 03=00 04=07 05=20 06=18 07=00 08=00
14=14 15=62 16=02 17=05 words 00=82ff 01=0fff 02=00ff 03=00ff 04=07ff
05=20ff 06=18ff 07=00ff
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC3200CL3.0
spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC3200CL3.0
spdmem2 at iic0 addr 0x52: 1GB DDR SDRAM non-parity PC3200CL3.0
spdmem3 at iic0 addr 0x53: 1GB DDR SDRAM non-parity PC3200CL3.0
pciide1 at pci0 dev 20 function 1 "ATI SB400 IDE" rev 0x00: DMA, channel
0 configured to compatibility, channel 1 wired to compatibility
atapiscsi0 at pciide1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LITE-ON, DVDRW LH-20A1P, KL05> ATAPI
5/cdrom removable
wd2 at pciide1 channel 0 drive 1: <ST33232A>
wd2: 16-sector PIO, LBA, 3077MB, 6303024 sectors
cd0(pciide1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4
wd2(pciide1:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pcib0 at pci0 dev 20 function 3 "ATI SB400 ISA" rev 0x00
ppb2 at pci0 dev 20 function 4 "ATI SB400 PCI" rev 0x00
pci3 at ppb2 bus 3
bwi0 at pci3 dev 10 function 0 "Broadcom BCM4318" rev 0x02: apic 2 int
20, address 00:11:50:ec:b2:00
auixp0 at pci0 dev 20 function 5 "ATI SB400 AC97" rev 0x02: apic 2 int 17
auixp0: soft resetting aclink
pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd2a (ce8fdd973408817c.a) swap on wd2b dump on wd2b
ac97: codec id 0x414c4760 (Avance Logic ALC655 rev 0)
audio0 at auixp0
usbdevs -v:
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
ATI(0x1002), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 powered
port 7 powered
port 8 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
ATI(0x1002), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
ATI(0x1002), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
Since grabbing the dmesg reports I've also spotted the "legacy support"
on some of the USB ports and switched that off in BIOS, with no luck.
