On Tue, Feb 11, 2014 at 10:32:25AM -0500, RD Thrush wrote: > On 02/10/14 13:20, Kenneth Westerback wrote: > > On 10 February 2014 13:11, RD Thrush <openbsd-m...@thrush.com> wrote: > >> With a somewhat recent i7 desktop, using startx, X seems to run ok; > >> however, at 1024x768 rather than the expected 1920x1200 resolution. > >> ctl-alt-keypad+ or - have no effect on resolution. ctl-alt-backspace > >> correctly reverts to text mode. I then tried Xorg -configure to look for > >> hints to improve resolution; however, that resulted in a segfault almost > >> immediately. > >> > > > > I'm pretty sure > > > > vga1 at pci0 dev 2 function 0 "Intel HD Graphics 4600" rev 0x06 > > > > is not supported in the sense of working as opposed to being > > recognized. i.e. 1024x768 is likely as good as it gets until support > > is added. Even 4400 is problematic at the moment. > > > > But I'm willing to be corrected by people more in the know. :-) > > > > .... Ken > > Thanks for the feedback. Apparently, Intel HD Graphics 4000 is similarly not > yet supported...
Ivy bridge works fine, what you didn't point out is that you have both radeondrm and inteldrm in that machine. Setups with multiple cards may have been broken by the fbtab changes Try adjust your /etc/fbtab along these lines and restart your xorg server. --- fbtab.prev Wed Feb 12 11:46:14 2014 +++ fbtab Wed Feb 12 11:47:15 2014 @@ -2,6 +2,6 @@ # login(1) reads this file to determine which devices should be chown'd to # the new user. Format is: # login-tty perm device:[device]:... -/dev/ttyC0 0600 /dev/console:/dev/wskbd:/dev/wskbd0:/dev/wsmouse:/dev/wsmouse0:/dev/ttyCcfg:/dev/drm0 +/dev/ttyC0 0600 /dev/console:/dev/wskbd:/dev/wskbd0:/dev/wsmouse:/dev/wsmouse0:/dev/ttyCcfg:/dev/drm0:/dev/drm1:/dev/drm2:/dev/drm3 # samples #/dev/ttyC0 0600 /dev/fd0
