Ok, I decided to switch from using a little Linksys 802.11b parallel
print server to using my OpenBSD box for printing to my one printer.
Printing locally works fine but I'm having trouble printing from XP.
[EMAIL PROTECTED]:/home/ethant# cat /etc/printcap
# $OpenBSD: printcap,v 1.4 2003/03/28 21:32:30 jmc Exp $
#
lp|:\
:sh:sf:lp=/dev/lpt0:sd=/var/spool/output:lf=/var/log/lpd-errs:
[EMAIL PROTECTED]:/home/ethant# lpq
Warning: no daemon present
Rank Owner Job Files Total Size
1st ethant 9 Test Page 0 bytes
[EMAIL PROTECTED]:/home/ethant# ps waux |grep lpd
daemon 7435 0.0 0.9 180 556 ?? Ss 10:22PM 0:00.03 /usr/sbin/lpd
[EMAIL PROTECTED]:/home/ethant# sudo lprm 9
cannot dequeue dfA009LOCUST
cfA009locust.2fortheroad.net dequeued
And I get a bunch of these in /var/log/lpd-errs until I rm everything
in /var/spool/output:
Dec 1 22:31:06 grits lpd[15269]: locust.2fortheroad.net
Dec 1 22:31:06 grits lpd[15269]: link tfA009locust.2fortheroad.net
cfA009locust.2fortheroad.net: File exists
Dec 1 22:31:14 grits lpd[5050]: locust.2fortheroad.net
Dec 1 22:31:14 grits lpd[5050]: link tfA009locust.2fortheroad.net
cfA009locust.2fortheroad.net: File exists
Dec 1 22:31:22 grits lpd[21910]: locust.2fortheroad.net
Dec 1 22:31:22 grits lpd[21910]: link tfA009locust.2fortheroad.net
cfA009locust.2fortheroad.net: File exists
Dec 1 22:31:30 grits lpd[17060]: locust.2fortheroad.net
Dec 1 22:31:30 grits lpd[17060]: link tfA009locust.2fortheroad.net
cfA009locust.2fortheroad.net: File exists
Dec 1 22:31:38 grits lpd[23270]: locust.2fortheroad.net
Dec 1 22:31:38 grits lpd[23270]: link tfA009locust.2fortheroad.net
cfA009locust.2fortheroad.net: File exists
I saw a similar message on misc back in August but no resolution.
What am I doing wrong?
Thanks,
Greg
OpenBSD 3.7 (GENERIC) #0: Thu Jul 14 17:59:16 PDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class, 128KB L2 cache) 1 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MM
X,FXSR,SSE
real mem = 65052672 (63528K)
avail mem = 51933184 (50716K)
using 819 buffers containing 3354624 bytes (3276K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(77) BIOS, date 01/03/02, BIOS32 rev. 0 @ 0xfd7b0
pcibios0 at bios0: rev 2.1 @ 0xfd7b0/0x850
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf40/160 (8 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xd0000/0x8000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82810E" rev 0x03
vga1 at pci0 dev 1 function 0 "Intel 82810E Graphics" rev 0x03: aperture at 0xf8
000000, size 0x4000000
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0 "Intel 82801AA Hub-to-PCI" rev 0x02
pci1 at ppb0 bus 1
ahc1 at pci1 dev 11 function 0 "Adaptec AHA-2940U" rev 0x01: irq 3
scsibus0 at ahc1: 16 targets
st0 at scsibus0 targ 4 lun 0: <WangDAT, Model 3400DX, 5.0j> SCSI2 1/sequential r
emovable
st0: drive empty or not ready
cbb0 at pci1 dev 13 function 0 "Ricoh 5C475 CardBus" rev 0x81: irq 9
xl0 at pci1 dev 14 function 0 "3Com 3c905B 100Base-TX" rev 0x00: irq 10, address
00:10:5a:02:3d:8f
exphy0 at xl0 phy 24: 3Com internal media interface
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801AA LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801AA IDE" rev 0x02: DMA, channel 0 w
ired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST320410A>
wd0: 16-sector PIO, LBA, 19092MB, 39102336 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <SAMSUNG, CD-ROM SC-148, B100> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801AA USB" rev 0x02: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82801AA SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5 "Intel 82801AA AC97" rev 0x02: irq 9, ICH AC97
ac97: codec id 0x41445361 (Analog Devices AD1886)
ac97: codec features headphone, Analog Devices Phat Stereo
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
mpu0 at isa0 port 0x300/2: generic MPU-401 compatible
midi0 at mpu0: <MPU-401 MIDI UART>
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask fb6d netmask ff6d ttymask ffef
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
wi0 at pcmcia0 function 0 "INTERSIL, HFA384x/IEEE, Version 01.02" port 0xa000/64
wi0: PRISM2.5 ISL3873, Firmware 1.1.1 (primary), 1.7.4 (station), address 00:02:
6f:08:0d:85
uhub1 at uhub0 port 2
uhub1: vendor 0x109f product 0x7148, class 9/0, rev 1.10/0.00, addr 2
uhub1: 4 ports with 4 removable, self powered
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
