On Mon, Jul 21, 2014 at 11:50:19PM +0400, pae3 wrote:
> Hi.
>
> After upgrade from iso file (21 july) local daemons from /etc/rc.conf.local
> not started.
> During boot process 1 odd messages has been seen :
> "/etc/rc: no closing quote"
> ( on i386 & amd64).
Did you run sysmerge?
> OpenBSD 5.6-beta (GENERIC) #236: Mon Jul 21 02:35:53 MDT 2014
> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60
> GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF,PERF
> real mem = 1600483328 (1526MB)
> avail mem = 1561890816 (1489MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 08/26/08, BIOS32 rev. 0 @ 0xfdc40,
> SMBIOS rev. 2.5 @ 0xdf010 (24 entries)
> bios0: vendor LENOVO version "14CN34WW" date 08/26/2008
> bios0: LENOVO Lenovo
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP APIC HPET MCFG TCPA TMOR APIC BOOT ASF! SSDT SSDT
> SSDT
> acpi0: wakeup devices HDEF(S4) PXS1(S4) PXS2(S4) PXS3(S4) USB1(S4) USB2(S4)
> USB3(S4) USB4(S4) USB7(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> cpu0: apic clock running at 132MHz
> cpu at mainbus0: not configured
> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 2, remapped to apid 1
> acpihpet0 at acpi0: 14318179 Hz
> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 2 (RP01)
> acpiprt2 at acpi0: bus 3 (RP02)
> acpiprt3 at acpi0: bus 5 (RP03)
> acpiprt4 at acpi0: bus 6 (PCIB)
> acpiec0 at acpi0
> acpicpu0 at acpi0: C3, C2, C1, PSS
> acpitz0 at acpi0: critical temperature is 95 degC
> acpibtn0 at acpi0: PWRB
> acpibtn1 at acpi0: SLPB
> acpiac0 at acpi0: AC unit online
> acpibat0 at acpi0: BAT0 model "LE30_S" serial type LION oem "Sanyo"
> acpibtn2 at acpi0: LID_
> acpivideo0 at acpi0: GFX0
> bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1e00 0xdf000/0x800!
> 0xe0000/0x1800!
> cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1333, 1067, 800 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
> vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
> intagp0 at vga1
> agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
> inteldrm0 at vga1
> drm0 at inteldrm0
> inteldrm0: 1024x600
> wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
> azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
> azalia0: codecs: Realtek ALC269
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 1 int 17
> pci1 at ppb0 bus 2
> bge0 at pci1 dev 0 function 0 "Broadcom BCM5906M" rev 0x02, BCM5906 A2
> (0xc002): msi, address 00:1e:68:ae:1a:f0
> brgphy0 at bge0 phy 1: BCM5906 10/100baseTX PHY, rev. 0
> ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 1 int 16
> pci2 at ppb1 bus 3
> ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 1 int 18
> pci3 at ppb2 bus 5
> "Broadcom BCM4315" rev 0x01 at pci3 dev 0 function 0 not configured
> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 23
> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 19
> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18
> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 16
> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 23
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
> pci4 at ppb3 bus 6
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM
> disabled
> pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel
> 0 configured to compatibility, channel 1 configured to compatibility
> pciide0: channel 0 disabled (no drives)
> pciide0: channel 1 ignored (disabled)
> pciide1 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA,
> channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide1: using apic 1 int 19 for native-PCI interrupt
> wd0 at pciide1 channel 0 drive 0: <TOSHIBA MK5059GSX>
> wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
> wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1 int
> 19
> iic0 at ichiic0
> iic0: addr 0x4a 00=29 01=00 02=4b 03=50 04=50 05=50 06=50 07=50 08=50 09=50
> 0a=50 0b=50 0c=50 0d=50 0e=50 0f=50 22=4b 40=29 41=00 42=4b 43=50 44=50
> 45=50 46=50 47=50 48=29 49=50 4a=29 4b=50 4c=50 4d=50 4e=29 4f=50 ee=50
> words 00=4e80 01=3000 02=4b00 03=5000 04=5000 05=5000 06=5000 07=5000
> spdmem0 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pms0: Synaptics touchpad, firmware 7.2
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> axe0 at uhub0 port 1 configuration 1 interface 0 "D-Link DUB-E100 rev C1"
> rev 2.00/0.01 addr 2
> axe0: AX88772B, address bc:f6:85:d7:40:dc
> ukphy0 at axe0 phy 16: Generic IEEE 802.3u media interface, rev. 1: OUI
> 0x000ec6, model 0x0008
> rum0 at uhub0 port 2 "Ralink 802.11 bg WLAN" rev 2.00/0.01 addr 3
> rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address 00:18:f3:3a:24:3e
> uvideo0 at uhub0 port 3 configuration 1 interface 0 "BISON Corporation
> Lenovo EasyCamera" rev 2.00/14.10 addr 4
> video0 at uvideo0
> umass0 at uhub0 port 5 configuration 1 interface 0 "Generic USB2.0-CRW" rev
> 2.00/58.87 addr 5
> umass0: using SCSI over Bulk-Only
> scsibus1 at umass0: 2 targets, initiator 0
> sd0 at scsibus1 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0 0/direct
> removable serial.0bda0158114173400000
> umass1 at uhub0 port 7 configuration 1 interface 0 "A-DATA A-DATA USB Flash
> Drive" rev 2.00/1.00 addr 6
> umass1: using SCSI over Bulk-Only
> scsibus2 at umass1: 2 targets, initiator 0
> sd1 at scsibus2 targ 1 lun 0: <A-DATA, USB Flash Drive, 0.00> SCSI2 0/direct
> removable serial.125fe74ad1e38572d34a
> sd1: 15487MB, 512 bytes/sector, 31719423 sectors
> vscsi0 at root
> scsibus3 at vscsi0: 256 targets
> softraid0 at root
> scsibus4 at softraid0: 256 targets
> sd2 at scsibus4 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
> sd2: 51199MB, 512 bytes/sector, 104857072 sectors
> root device (default wd0a): sd2a
> swap device (default sd2b):
> root on sd2a swap on sd2b dump on sd2b
> ehci_idone: ex=0xd7e7d3f4 is done!
> ehci_idone: ex=0xd7e7d3f4 is done!
>
--
Antoine
