Hi folks, I've setup a pppoe connection to my ISP (Deutsche Telekom), following pppoe(4). Problem:
At boot time the connection is not setup immediately. "ifconfig -A" shows just re0: flags=28843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,NOINET6> mtu 1500 lladdr 80:ee:73:95:c1:0c priority: 0 media: Ethernet autoselect (100baseTX full-duplex,rxpause,txpause) status: active pppoe0: flags=28851<UP,POINTOPOINT,RUNNING,SIMPLEX,MULTICAST,NOINET6> mtu 1492 priority: 0 dev: re0 state: PADR sent sid: 0x0 PADI retries: 0 PADR retries: 1 sppp: phase establish authproto pap authname "00150xxxxxxxxxxxxxxxxxxx#0...@t-online.de" groups: pppoe extern egress status: no carrier inet 0.0.0.0 --> 0.0.0.1 netmask 0xffffffff It takes 2 or 3 minutes till the connection is established. This is openBSD "current" grabbed via CVS and built 2 days ago. Every helpful comment is highly appreciated. Regards Harri ----------------------------------------------------------------------------- # hostname.re0 up # hostname.pppoe0 inet 0.0.0.0 255.255.255.255 NONE \ pppoedev re0 \ authproto pap \ authname '00150xxxxxxxxxxxxxxxxxxx#0...@t-online.de' \ authkey 'yyyyyyyy' \ up dest 0.0.0.1 group extern !/sbin/route add default -ifp pppoe0 0.0.0.1
OpenBSD 5.6-current (build) #4: Wed Sep 24 14:24:40 CEST 2014 r...@marvin.afaics.de:/export/build real mem = 8462303232 (8070MB) avail mem = 8228302848 (7847MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xeb530 (73 entries) bios0: vendor American Megatrends Inc. version "1.01" date 09/25/2013 bios0: Shuttle Inc. DS437 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP APIC FPDT MCFG SLIC HPET SSDT SSDT SSDT acpi0: wakeup devices P0P1(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3) USB6(S3) USB7(S3) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Celeron(R) CPU 1037U @ 1.80GHz, 1796.20 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS cpu0: 256KB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 99MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Celeron(R) CPU 1037U @ 1.80GHz, 1795.92 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS cpu1: 256KB 64b/line 8-way L2 cache cpu1: smt 0, core 1, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (P0P1) acpiprt2 at acpi0: bus 1 (RP01) acpiprt3 at acpi0: bus 2 (RP02) acpiprt4 at acpi0: bus 3 (RP03) acpiprt5 at acpi0: bus 4 (RP04) acpiprt6 at acpi0: bus -1 (RP05) acpiprt7 at acpi0: bus -1 (RP06) acpiprt8 at acpi0: bus -1 (RP07) acpiprt9 at acpi0: bus -1 (RP08) acpiprt10 at acpi0: bus -1 (PEG0) acpiprt11 at acpi0: bus -1 (PEG1) acpiprt12 at acpi0: bus -1 (PEG2) acpiprt13 at acpi0: bus -1 (PEG3) acpiec0 at acpi0: not present acpicpu0 at acpi0: C2, C1, PSS acpicpu1 at acpi0: C2, C1, PSS acpipwrres0 at acpi0: FN00, resource for FAN0 acpipwrres1 at acpi0: FN01, resource for FAN1 acpipwrres2 at acpi0: FN02, resource for FAN2 acpipwrres3 at acpi0: FN03, resource for FAN3 acpipwrres4 at acpi0: FN04, resource for FAN4 acpitz0 at acpi0: critical temperature is 106 degC acpitz1 at acpi0: critical temperature is 106 degC acpibat0 at acpi0: BAT0 not present acpibat1 at acpi0: BAT1 not present acpibat2 at acpi0: BAT2 not present acpibtn0 at acpi0: PWRB acpibtn1 at acpi0: LID0 acpivideo0 at acpi0: GFX0 cpu0: Enhanced SpeedStep 1796 MHz: speeds: 1800, 1700, 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800, 774 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09 vga1 at pci0 dev 2 function 0 "Intel HD Graphics 2500" rev 0x09 intagp at vga1 not configured inteldrm0 at vga1 drm0 at inteldrm0 drm: Memory usable by graphics device = 2048M No connectors reported connected with modes Cannot find any crtc or sizes - going 1024x768 inteldrm0: 1024x768 wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi azalia0: codecs: Realtek ALC662, Intel/0x2806, using Realtek ALC662 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi pci1 at ppb0 bus 1 "Realtek 8188CE" rev 0x01 at pci1 dev 0 function 0 not configured ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi pci2 at ppb1 bus 2 re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G (0x4c00), msi, address 80:ee:73:95:c1:0c rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0 ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi pci3 at ppb2 bus 3 vendor "ASMedia", unknown product 0x1142 (class serial bus subclass USB, rev 0x00) at pci3 dev 0 function 0 not configured ppb3 at pci0 dev 28 function 3 "Intel 7 Series PCIE" rev 0xc4: msi pci4 at ppb3 bus 4 re1 at pci4 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G (0x4c00), msi, address 80:ee:73:95:c1:0d rgephy1 at re1 phy 7: RTL8251 PHY, rev. 0 ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 "Intel NM70 LPC" rev 0x04 ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3 scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 2 lun 0: <ATA, Crucial_CT120M50, MU05> SCSI3 0/direct fixed naa.500a07510c5d4ed4 sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int 18 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-12800 SO-DIMM isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 it0 at isa0 port 0x2e/2: IT8728F rev 1, EC port 0xa30 uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 umass0 at uhub3 port 2 configuration 1 interface 0 "Generic USB Storage" rev 2.00/94.54 addr 3 umass0: using SCSI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 sd1 at scsibus2 targ 1 lun 0: <Generic, STORAGE DEVICE, 9454> SCSI0 0/direct removable vscsi0 at root scsibus3 at vscsi0: 256 targets softraid0 at root scsibus4 at softraid0: 256 targets root on sd0a (806201c2467e14bb.a) swap on sd0b dump on sd0b
signature.asc
Description: OpenPGP digital signature