Hi, can you show us the contents of your hostname.* and mygate files? What are the specific configuration steps?
Reyk > Am 03.11.2014 um 18:04 schrieb Sly Midnight <slymidni...@yahoo.com>: > > Hello everyone. > > I am new to this list but I am in need of some help. > > I have been running OpenBSD since 4.6 as my firewall and gateway with > much success (transitioned from FreeBSD) and it was working out great as > a light weight and secure OS for my Internet router and gateway. > > One of the uses of this box is to route IPv6 for my local subnet out to > the Internet. It used to use a free tunnel service that worked great. > But I have since transitioned to the IPv6 that my ISP provides me > directly. This was a bit painful at first but I got it working with the > help of some 3rd party software not available in the ports collection > called Dibbler. This software is not perfect, but with the help of a > script I fleshed out myself i got it to do what I needed. The client > portion of that DHCPv6 program reaches out to the DHCPv6 server on my > ISP's network and obtains all the information I need. The only thing it > is currently able to do on it's own is plumb up the primary IPv6 address > it obtains from the ISP. But I still have to add the requisite default > route information. Also I have to then manually plumb up the delegated > IPv6 prefix assigned to my subnet (that I request) to my internal interface. > > I then use rtadvd to advertise that route and allow for SLAAC to work on > my internal network to all IPv6 aware hosts. > > This used to work just fine until I upgraded my router to 5.6 from 5.5. > After adding 'inet6 autoconf' to my hostname.if files, it appeared I got > my IPv6 functionality back. > > However, while the box itself is back on IPv6 Internet, the subnet it > acts as a router for can no longer get onto the Internet. > > After looking into it further it appears there is something wrong with > the routing table. There is no route for the subnet of the address I > manually add via ifconfig to the internal interface. I do not know how > to do this, nor was this previously necessary. The ifconfig command I > call to add the address specified the prefixlen 64 which *should* imply > the address is part of a /64 subnet where all other addresses within > that subnet should be reachable via the same interface the address is > plumbed up on. > > When I do a route show or a netstat -nr I do not see such a route nor > have I been successful in figuring out how to call the route add command > to add such a route. > > Thanks in advance. > SlyM > > Here is my ifconfig output: > vr0: flags=208843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF6> mtu 1500 > lladdr 00:40:63:e6:42:a5 > priority: 0 > groups: egress > media: Ethernet autoselect (100baseTX full-duplex) > status: active > inet 50.186.155.188 netmask 0xffffff00 broadcast 50.186.155.255 > inet6 fe80::240:63ff:fee6:42a5%vr0 prefixlen 64 scopeid 0x1 > inet6 2001:558:6030:44:35cc:9a5e:65f7:c139 prefixlen 64 > em0: > flags=208b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST,AUTOCONF6> > mtu 1500 > lladdr 00:1b:21:4e:d4:a2 > priority: 0 > media: Ethernet autoselect (1000baseT full-duplex,rxpause,txpause) > status: active > inet 192.168.82.1 netmask 0xffffff00 broadcast 192.168.82.255 > inet6 fe80::21b:21ff:fe4e:d4a2%em0 prefixlen 64 scopeid 0x2 > inet6 2601:7:5780:c99::1 prefixlen 64 > > Here is my route show output: > Routing tables > > Internet: > Destination Gateway Flags Refs Use Mtu Prio > Iface > default 50.186.155.1 UGS 5 741497 - 8 > vr0 > 50.186.155/24 link#1 UC 1 0 - 4 > vr0 > 50.186.155.1 00:01:5c:6f:f6:46 UHLc 1 0 - 4 > vr0 > 50.186.155.188 00:40:63:e6:42:a5 UHLl 0 0 - 1 > lo0 > 127/8 127.0.0.1 UGRS 0 0 32768 8 > lo0 > 127.0.0.1 127.0.0.1 UH 1 0 32768 4 > lo0 > 192.168.82/24 link#2 UC 4 0 - 4 > em0 > 192.168.82.1 00:1b:21:4e:d4:a2 HLl 0 0 - 1 > lo0 > 192.168.82.200 80:ee:73:64:13:0c UHLc 4 512052 - 4 > em0 > 192.168.82.251 08:3e:8e:07:e5:64 UHLc 0 0 - 4 > em0 > 192.168.82.253 00:15:c5:f5:0d:b4 UHLc 2 6854 - 4 > em0 > 192.168.82.254 00:24:2b:df:8f:2b UHLc 0 3722 - 4 > em0 > 224/4 127.0.0.1 URS 0 0 32768 8 > lo0 > > Internet6: > Destination Gateway > Flags Refs Use Mtu Prio Iface > ::/104 ::1 > UGRS 0 0 32768 8 lo0 > ::/96 ::1 > UGRS 0 0 32768 8 lo0 > default 2001:558:6030:44::1 > UGS 0 7716 - 8 vr0 > ::1 ::1 > UH 14 0 32768 4 lo0 > ::127.0.0.0/104 ::1 > UGRS 0 0 32768 8 lo0 > ::224.0.0.0/100 ::1 > UGRS 0 0 32768 8 lo0 > ::255.0.0.0/104 ::1 > UGRS 0 0 32768 8 lo0 > ::ffff:0.0.0.0/96 ::1 > UGRS 0 0 32768 8 lo0 > 2001:558:6030:44::/64 link#1 > UC 1 0 - 4 vr0 > 2001:558:6030:44::1 00:01:5c:6f:f6:46 > UHLc 1 359 - 4 vr0 > 2001:558:6030:44:35cc:9a5e:65f7:c139 00:40:63:e6:42:a5 > UHLl 0 0 - 1 lo0 > 2002::/24 ::1 > UGRS 0 0 32768 8 lo0 > 2002:7f00::/24 ::1 > UGRS 0 0 32768 8 lo0 > 2002:e000::/20 ::1 > UGRS 0 0 32768 8 lo0 > 2002:ff00::/24 ::1 > UGRS 0 0 32768 8 lo0 > 2601:7:5780:c99::1 00:1b:21:4e:d4:a2 > UHLl 0 5834 - 1 lo0 > fe80::/10 ::1 > UGRS 0 0 32768 8 lo0 > fe80::%vr0/64 link#1 > UC 1 0 - 4 vr0 > fe80::201:5cff:fe6f:f646%vr0 00:01:5c:6f:f6:46 > UHLc 0 88 - 4 vr0 > fe80::240:63ff:fee6:42a5%vr0 00:40:63:e6:42:a5 > UHLl 0 0 - 1 lo0 > fe80::%em0/64 link#2 > UC 6 0 - 4 em0 > fe80::215:c5ff:fef5:db4%em0 00:15:c5:f5:0d:b4 > UHLc 0 3 - 4 em0 > fe80::21b:21ff:fe4e:d4a2%em0 00:1b:21:4e:d4:a2 > HLl 0 0 - 1 lo0 > fe80::16d6:4dff:fe27:4ffa%em0 14:d6:4d:27:4f:fa > UHLc 0 0 - 4 em0 > fe80::42b0:faff:fe6f:642f%em0 40:b0:fa:6f:64:2f > UHLc 0 2 - 4 em0 > fe80::82ee:73ff:fe64:130c%em0 80:ee:73:64:13:0c > UHLc 0 121 - 4 em0 > fe80::9218:7cff:feed:914e%em0 90:18:7c:ed:91:4e > UHLc 0 22 - 4 em0 > fe80::d2e7:82ff:fed5:c675%em0 d0:e7:82:d5:c6:75 > UHLc 0 2 - 4 em0 > fe80::%lo0/64 fe80::1%lo0 > U 0 0 - 4 lo0 > fe80::1%lo0 fe80::1%lo0 > UHLl 0 0 - 1 lo0 > fec0::/10 ::1 > UGRS 0 0 32768 8 lo0 > ff01::/16 ::1 > UGRS 0 0 32768 8 lo0 > ff01::%vr0/32 link#1 > UC 0 0 - 4 vr0 > ff01::%em0/32 link#2 > UC 0 0 - 4 em0 > ff01::%lo0/32 fe80::1%lo0 > UC 0 0 - 4 lo0 > ff02::/16 ::1 > UGRS 0 0 32768 8 lo0 > ff02::%vr0/32 link#1 > UC 1 0 - 4 vr0 > ff02::1:2%vr0 link#1 > UHLc 1 2 - 4 vr0 > ff02::%em0/32 link#2 > UC 3 0 - 4 em0 > ff02::1:ff64:130c%em0 link#2 > UHLc 0 0 - 4 em0 > ff02::1:ffd5:c675%em0 link#2 > UHLc 0 0 - 4 em0 > ff02::1:ffed:914e%em0 link#2 > UHLc 0 0 - 4 em0 > ff02::%lo0/32 fe80::1%lo0 > UC 0 0 - 4 lo0 > > And here's my dmesg output from the last boot: > OpenBSD 5.6 (GENERIC) #274: Fri Aug 8 00:05:13 MDT 2014 > dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: VIA Esther processor 1300MHz ("CentaurHauls" 686-class) 1.30 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE,NXE,SSE3,EST,TM2 > real mem = 1056403456 (1007MB) > avail mem = 1026699264 (979MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 05/16/06, BIOS32 rev. 0 @ 0xfa950, > SMBIOS rev. 2.3 @ 0xf0800 (39 entries) > bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 05/16/2006 > acpi0 at bios0: rev 0 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP > acpi0: wakeup devices SLPB(S5) PCI0(S5) USB0(S3) USB1(S3) USB2(S3) > USB3(S3) USB4(S3) USB5(S3) USB6(S3) USB7(S3) LAN0(S5) AC97(S5) MC97(S5) > UAR1(S5) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpiprt0 at acpi0: bus 0 (PCI0) > acpicpu0 at acpi0: C3, C2, PSS > acpibtn0 at acpi0: PWRB > acpibtn1 at acpi0: SLPB > bios0: ROM list: 0xc0000/0xf200 0xd0000/0x8000! 0xd8000/0x1000 > cpu0 at mainbus0: (uniprocessor) > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: RNG AES AES-CTR SHA1 SHA256 RSA > cpu0: Enhanced SpeedStep 1297 MHz: speeds: 1300, 400 MHz > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "VIA CN700 Host" rev 0x00 > viaagp0 at pchb0: v3 > agp0 at viaagp0: aperture at 0xe8000000, size 0x10000000 > pchb1 at pci0 dev 0 function 1 "VIA CN700 Host" rev 0x00 > pchb2 at pci0 dev 0 function 2 "VIA CN700 Host" rev 0x00 > pchb3 at pci0 dev 0 function 3 "VIA PT890 Host" rev 0x00 > pchb4 at pci0 dev 0 function 4 "VIA CN700 Host" rev 0x00 > pchb5 at pci0 dev 0 function 7 "VIA CN700 Host" rev 0x00 > ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00 > pci1 at ppb0 bus 1 > vga1 at pci1 dev 0 function 0 "VIA S3 Unichrome PRO IGP" rev 0x01 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA > pciide0: using irq 15 for native-PCI interrupt > wd0 at pciide0 channel 0 drive 0: <KINGSTON SV100S232G> > wd0: 16-sector PIO, LBA48, 30533MB, 62533296 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 > uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 11 > uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 11 > uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 15 > uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 15 > ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 10 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1 > viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00: SMI > iic0 at viapm0 > spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-4200CL5 > auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: irq 10 > ac97: codec id 0x56494182 (VIA Technologies <82>) > ac97: codec features 18 bit DAC, 18 bit ADC, No 3D Stereo > audio0 at auvia0 > vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x78: irq 11, address > 00:40:63:e6:42:a5 > ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI > 0x004063, model 0x0032 > em0 at pci0 dev 20 function 0 "Intel 82541GI" rev 0x05: irq 15, address > 00:1b:21:4e:d4:a2 > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci3: USB revision 1.0 > uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at mainbus0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com0: console > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > viasio0 at isa0 port 0x2e/2: VT1211 rev 0x02, HM, WDG not activated > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > scsibus2 at softraid0: 256 targets > root on wd0a (2864f309e4ec4b06.a) swap on wd0b dump on wd0b