Just to follow up, I apologised to Martin off list regarding the dmesg
photos. Reason for the photos was that this laptop only has 2x USB
ports & a thunderbolt port as expansion but unfortunately the USB
ports are not working hence resorting to photos.
Then I remembered that my previous attempt of successfully installing
OpenBSD on here involved a thunderbolt cinema display, the gigabit
ethernet port on the display was detected as bge(4) and functioned.
I no longer have access to a cinema display but do have a thunderbolt
gigabit ethernet adapter which I hadn't tried yet.
Worked a treat, I was able to boot the laptop from a USB flash drive &
perform a network install via the bge(4) interface.

the thunderbolt adapter is only detected if it's attached prior to
booting the kernel, I guess this is because it crosses over several
areas and is not seen as a detachable device?
If you do disconnect it after booting, the system hard locks needing a
power cycle.

sleep & resume works except in X where on resume the trackpad goes crazy.

USB wise, I have a verbatim usb 2 flash drive which works fine, my
other flash drives do not, (kernel reports: xhci0: NULL xfer pointer,
uhub0: device problem, disabling port 1
urtwn(4) interface is detected but doesn't appear to work.

OpenBSD 5.6-current (GENERIC.MP) #547: Mon Nov 10 08:50:13 MST 2014
    dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error b1<clock_battery,config_unit,memory_size>
real mem = 8475713536 (8083MB)
avail mem = 8246259712 (7864MB)
warning: no entropy supplied by boot loader
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0000 (54 entries)
bios0: vendor Apple Inc. version "MBA51.88Z.00EF.B02.1211271028" date 11/27/2012
bios0: Apple Inc. MacBookAir5,1
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP HPET APIC SBST ECDT SSDT SSDT SSDT SSDT SSDT
SSDT SSDT SSDT SSDT SSDT DMAR MCFG
acpi0: wakeup devices P0P2(S4) PEG2(S4) EC__(S4) HDEF(S4) RP02(S4)
ARPT(S4) RP05(S4) EHC1(S4) EHC2(S4) XHC1(S4) ADP1(S4) LID0(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-3667U CPU @ 2.00GHz, 1895.95 MHz
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7-3667U CPU @ 2.00GHz, 1895.70 MHz
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i7-3667U CPU @ 2.00GHz, 1895.70 MHz
cpu2: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 1, core 0, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-3667U CPU @ 2.00GHz, 1895.70 MHz
cpu3: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiec0 at acpi0
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-153
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P2)
acpiprt2 at acpi0: bus -1 (PEG2)
acpiprt3 at acpi0: bus 2 (RP02)
acpiprt4 at acpi0: bus 3 (RP05)
acpicpu0 at acpi0: C3, C1, PSS
acpicpu1 at acpi0: C3, C1, PSS
acpicpu2 at acpi0: C3, C1, PSS
acpicpu3 at acpi0: C3, C1, PSS
acpibat0 at acpi0: BAT0 model "3545797981023400290" type
3545797981528607052 oem "3545797981528673619"
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpibtn2 at acpi0: SLPB
acpivideo0 at acpi0: IGPU
acpivout0 at acpivideo0: DD02
cpu0: Enhanced SpeedStep 1895 MHz: speeds: 2001, 2000, 1900, 1800,
1700, 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz
memory map conflict 0xe00f8000/0x1000
memory map conflict 0xfed1c000/0x4000
memory map conflict 0xffe70000/0x30000
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
intagp at vga1 not configured
inteldrm0 at vga1
drm0 at inteldrm0
drm: Memory usable by graphics device = 2048M
inteldrm0: 1366x768
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
azalia0: codecs: Cirrus Logic CS4206, Intel/0x2806, using Cirrus Logic CS4206
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
pci2 at ppb1 bus 2
"Broadcom BCM43224" rev 0x01 at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 4 "Intel 7 Series PCIE" rev 0xc4: msi
pci3 at ppb2 bus 3
ppb3 at pci3 dev 0 function 0 vendor "Intel", unknown product 0x1547 rev 0x03
pci4 at ppb3 bus 4
ppb4 at pci4 dev 0 function 0 vendor "Intel", unknown product 0x1547
rev 0x03: msi
pci5 at ppb4 bus 5
vendor "Intel", unknown product 0x1547 (class system subclass
miscellaneous, rev 0x03) at pci5 dev 0 function 0 not configured
ppb5 at pci4 dev 3 function 0 vendor "Intel", unknown product 0x1547
rev 0x03: msi
pci6 at ppb5 bus 6
ppb6 at pci6 dev 0 function 0 vendor "Intel", unknown product 0x1549 rev 0x00
pci7 at ppb6 bus 7
ppb7 at pci7 dev 0 function 0 vendor "Intel", unknown product 0x1549
rev 0x00: msi
pci8 at ppb7 bus 8
8:0:0: mem address conflict 0xffff0000/0x10000
bge0 at pci8 dev 0 function 0 "Broadcom BCM57762" rev 0x00, unknown
BCM57766 (0x57766000): msi, address 40:6c:8f:
brgphy0 at bge0 phy 1: BCM57765 10/100/1000baseT PHY, rev. 0
ppb8 at pci4 dev 4 function 0 vendor "Intel", unknown product 0x1547
rev 0x03: msi
pci9 at ppb8 bus 55
ppb9 at pci4 dev 5 function 0 vendor "Intel", unknown product 0x1547
rev 0x03: msi
pci10 at ppb9 bus 104
ppb10 at pci4 dev 6 function 0 vendor "Intel", unknown product 0x1547
rev 0x03: msi
pci11 at ppb10 bus 105
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 22
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 vendor "Intel", unknown product 0x1e56 rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, APPLE SSD TS128E, TQAA> SCSI3
0/direct fixed naa.0000000000000000
sd0: 115712MB, 512 bytes/sector, 236978176 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
iic0: addr 0x2c 03=fc 05=6c 06=40 71=06 72=80 86=70 90=37 91=1c 92=35
93=3f 94=62 95=8c 96=63 97=85 98=24 99=04 9a=88 9f=7c a0=7f a1=b5
a2=bf a3=7b a4=28 a5=cf a6=64 a7=2d words 00=0000 01=0000 02=00fc
03=fc00 04=006c 05=6c40 06=4000 07=0000
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns8250, no fifo
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
nvram: invalid checksum
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uvideo0 at uhub3 port 1 configuration 1 interface 0 "Apple Inc.
FaceTime HD Camera (Built-in)" rev 2.00/80.25 addr 3
video0 at uvideo0
ugen0 at uhub3 port 1 configuration 1 "Apple Inc. FaceTime HD Camera
(Built-in)" rev 2.00/80.25 addr 3
uhub4 at uhub2 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhub5 at uhub4 port 8 "Standard Microsystems product 0x2512" rev
2.00/b.b3 addr 3
uhub6 at uhub5 port 1 "Apple Inc. BRCM20702 Hub" rev 2.00/1.00 addr 4
uhidev0 at uhub6 port 1 configuration 1 interface 0 "Apple Computer
product 0x820a" rev 2.00/1.00 addr 5
uhidev0: iclass 3/1, 1 report id
ukbd0 at uhidev0 reportid 1: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub6 port 2 configuration 1 interface 0 "Apple Computer
product 0x820b" rev 2.00/1.00 addr 6
uhidev1: iclass 3/1, 2 report ids
ums0 at uhidev1 reportid 2: 3 buttons
wsmouse0 at ums0 mux 0
ugen1 at uhub6 port 3 "Apple Inc. Bluetooth USB Host Controller" rev
2.00/1.31 addr 7
uhidev2 at uhub5 port 2 configuration 1 interface 0 "Apple Inc. Apple
Internal Keyboard / Trackpad" rev 2.00/2.19 addr 8
uhidev2: iclass 3/1, 9 report ids
ukbd1 at uhidev2 reportid 1: 8 variable keys, 6 key codes, country code 15
wskbd1 at ukbd1 mux 1
wskbd1: connecting to wsdisplay0
uhid0 at uhidev2 reportid 9: input=0, output=0, feature=3
uhidev3 at uhub5 port 2 configuration 1 interface 1 "Apple Inc. Apple
Internal Keyboard / Trackpad" rev 2.00/2.19 addr 8
uhidev3: iclass 3/0, 68 report ids
uhid1 at uhidev3 reportid 68: input=511, output=0, feature=0
ubcmtp0 at uhub5 port 2 configuration 1 interface 2 "Apple Inc. Apple
Internal Keyboard / Trackpad" rev 2.00/2.19 addr 8
wsmouse1 at ubcmtp0 mux 0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (e6edb67eabd79aa0.a) swap on sd0b dump on sd0b
clock: unknown CMOS layout
hw.sensors.cpu0.temp0=50.00 degC
hw.sensors.cpu1.temp0=50.00 degC
hw.sensors.cpu2.temp0=50.00 degC
hw.sensors.cpu3.temp0=50.00 degC
hw.sensors.acpibat0.volt0=7.50 VDC (voltage)
hw.sensors.acpibat0.volt1=8.36 VDC (current voltage)
hw.sensors.acpibat0.power0=8.71 W (rate)
hw.sensors.acpibat0.watthour0=40.65 Wh (last full capacity)
hw.sensors.acpibat0.watthour1=0.25 Wh (warning capacity)
hw.sensors.acpibat0.watthour2=0.10 Wh (low capacity)
hw.sensors.acpibat0.watthour3=38.11 Wh (remaining capacity), OK
hw.sensors.acpibat0.watthour4=46.80 Wh (design capacity)
hw.sensors.acpibat0.raw0=2 (battery charging), OK
hw.sensors.acpiac0.indicator0=On (power supply)
hw.sensors.acpibtn0.indicator0=On (lid open)

Reply via email to